‘GLAMorous’ achievement at university!

Rittal’s DCiB provides sustainability and data solution for Oxford’s GLAM Division

Andrew Wreford, Rittal's product manager for IT Systems, delves into the remarkable world of Oxford University's Gardens, Libraries and Museums (GLAM) division

Oxford University's Gardens, Libraries and Museums division (GLAM) forms one of the greatest concentrations of university collections in the world. GLAM holds over 21 million objects, specimens and printed items, constituting one of the largest and most significant collections in the world.

Faced with the challenges of increased data demand, the Museum of Natural History – one of the museums within GLAM – wanted to upgrade its IT infrastructure to house core network switches, responsible for running the services. A major rewiring project was undertaken with the aim of significantly improving the data connectivity for computers, phones and next-generation devices.

Ingenious approach

The wiring presented a challenge in itself, as the historically significant listed building was not best designed to accommodate the space for conventional hardware. This required ingenious methods to work with the fabric of the building.

Faced with these challenges, Anjanesh Babu the technical project lead in the Gardens, Libraries and Museums IT team, researched options available. The traditional approach was for the designated network core of a building to be stripped bare and rebuilt with air conditioning and electrics to meet the requirements for the equipment. However, given the nature of the building, this would present a number of challenges, including space and cooling loss through the surfaces. The design approach was led by GLAM Sustainability strategy.

‘Data Centre in a Box’

Anjanesh Babu, technical lead for the project, approached Rittal's IT team, who quickly identified the ‘Data Centre in a Box’ (DCiB) concept as a possible option. DCiB replicates the key data centre capabilities, only on a smaller scale, and has been developed to enable equipment to be deployed in non-traditional Data Centre environments. The turnkey package concept provides IT racks, demand-orientated climate control, PDU, monitoring and fire suppression. It provides a complete solution –  from product selection, through to installation and ongoing maintenance.

When installed in the Museum of Natural History, the cooling footprint would be significantly lower than the traditional full-room air conditioning and the absence of any work to the space to accommodate the system would mean that the building would remain relatively untouched.

A site visit by Rittal’s area sales manager for IT was arranged and the requirements gathered. “The system was to be located in the museum’s basement which had restricted access with very narrow staircase & doorways. In addition to this, the building’s listed status would mean that any cooling equipment would have to be positioned cleverly and with the utmost consideration, not only to aesthetic but to any noise pollution emitted” recalls Joel.

Identifying key areas

The IT area sales manager and members of the Rittal IT development team, Technical IT manager Clive Partridge and Andrew Wreford, worked with Anjanesh Babu to identify key areas that needed to be achieved. “Given the kW loads & environment of the proposed location, it became clear that the DCiB’s LCU option was the best way to go, and we quickly built up a package including racks, accessories, cooling, fire suppression, PDUs & monitoring. To mitigate the access restrictions, we used the ‘rack splitting / re-joining’ service which enabled us to resolve the challenge of space limitations of the project” says Partridge.

Rittal provided an end-to-end solution, from the manufacture of kit, to the installation, commissioning & handover. To overcome the issues with the listed building status, Rittal’s IT team worked in collaboration with Babu and lead contractor Monard Electrical to find a suitable home for the condenser.

Babu reflects on the options deployed: “RIttal’s DCiB allowed the museum to utilise the proposed location, without having to make costly building modifications, thus saving time, energy and effort.”

By adopting ‘in-rack’ precision cooling instead of ‘in-room’ cooling, the location is more environmentally efficient and this controls operational expenditure. Cooling via the high-performance LCU option provides temperature consistency, allows better care of their equipment along with nearly silent operations.

Numerous benefits

Not only is the installation providing energy efficiency and longevity for the museum, there is the added benefit of noise reduction in the room, compared to an existing server room utilising in-room cooling.

Haas Ezzet, head of IT Gardens and Museums (GLAM) at the University of Oxford, contextualises this piece of work as being part of the museum’s drive towards greater environmental sustainability. “The approach piloted here, of focusing climate control specifically to the area needed, the data cabinet, rather than the entire space in which it is housed, will optimise energy consumption and afford a blueprint for other spaces within GLAM and beyond.”

Oxford University's Gardens, Libraries and Museums division (GLAM) forms one of the greatest concentrations of university collections in the world.
Oxford University's Gardens, Libraries and Museums division (GLAM) forms one of the greatest concentrations of university collections in the world.

Rittal Ltd

Braithwell Way, Hellaby Industrial Estate
Hellaby
Rotherham
S66 8QY
UNITED KINGDOM

+44 (0)1709 704000

information@rittal.co.uk

https://www.rittal.co.uk

More news
2 hours ago
Contrinex celebrates its 50th anniversary
Fifty years ago this week, Contrinex was founded by Peter Heimlicher in Switzerland. What began as a one-man operation, is now a technology-leading, innovative global company, serving over 60 countries and employing more than 500 people worldwide, and is led by Peter’s daughter, CEO Annette Heimlicher.
4 hours ago
A full programme to inspire, inform and entertain
Manufacturing and Engineering Week (Birmingham NEC, 8-9 June) will be a celebration of British engineering, a two-day festival of innovation that will showcase the very best that UK industry has to offer, while also providing knowledge, inspiration and a touch of entertainment.
6 hours ago
Maxon’s Drive Technology Insight day is a great success
11th May 2022 saw Maxon’s first Drive Technology Insight day bring together the engineering community in the UK and Ireland.
1 day ago
Nord Drivesystems exhibits at ‘all about automation’ 2022
On 29 and 30 June 2022, Nord Drivesystems will present the DuoDrive geared motor, the energy-efficient IE5+ synchronous motor, the new decentralised NORDAC ON frequency inverter and the NORDAC PRO SK 500P control cabinet inverter, at ‘all about automation’.
1 day ago
TÜV Süd certifies Pilz product development as safe and secure
TÜV Süd has certified the development processes of Pilz in accordance with the international security standard IEC 62443-4-1. This addition to the existing functional safety management certification promises Pilz customers double security from now on.
1 day ago
Enclosures provide safety and ease of use for laser interlocks
Laser Support Services, which designs interlock systems, works with Spelsberg UK as its enclosure partner, based on the quality and flexibility of the housings.
2 days ago
Camozzi launches new UK short form catalogue
Camozzi Automation has launched its new UK short form catalogue, available both online and in hard copy format.
3 days ago
NSK roller guides increase uptime of blow moulding machines
A manufacturer of PET (polyethylene terephthalate) bottles frequently had to replace the linear guides on its blow moulding machines. However, after switching to NSK’s RA series roller guides, there have been no failures for over a year, producing annual cost savings in maintenance, spare parts and downtime of €60,000.
3 days ago
Design your future at Design Engineering Expo 2022
With innovation at its core, Design Engineering Expo 2022 is the perfect place for forward thinking design engineering professionals to gain insight into new technologies, learn how to improve efficiencies and gain inspiration for ideas they can implement into their workplace, to put them ahead of their competitors and form part of their future strategy.
3 days ago
Tray handling system gently handles medical-use glass cartridges
Gerresheimer Medical Systems Division produces over one billion high quality, medical grade, glass cartridges every year and central to its new post-production inspection and packaging system is the IEF Werner varioSTACK CF (Clean Factory) tray palletiser.

Login / Sign up