Hansford's new industrial accelerometers are smaller and lighter

The new family of HS-100 and HS-150 accelerometers is designed for use throughout industry, typically on drives and rotating shafts such as those found in pumps, fans, motors, gearboxes and compressors. In common with all vibration devices from Hansford Sensors, the new versions are designed and manufactured in the UK, to offer a robust, reliable and very accurate device when used with condition monitoring, predictive maintenance and plant management systems.

Improvements in size, weight and performance have been achieved through a combination of modified engineering techniques during manufacture and adoption of recent enhancements in component technology. Combined, these have allowed the overall height of each accelerometer to be cut by 10mm and the weight to be reduced by approximately 10 per cent, making each sensor even more compact for use in applications where access or weight restrictions apply.

In addition, the frequency response has been improved, to between 0.8kHz and 15kHz, while the resonant frequency has been increased to between 26kHz and 34kHz, in each case depending on specification. The shift in frequency response represents a significant enhancement, allowing even greater separation between the resonant frequency point of the piezoelectric sensing mechanism and the vibration frequencies of the application to be measured. In practice, this makes the new HS-100 and HS-150 accelerometers even more accurate across a much wider range of frequencies and applications.

These new accelerometers are available with a wide range of options, including intrinsically safe versions, special purpose cable assemblies and a choice of mounting threads, and are supported by Hansford Sensors' global network of technical and customer support centres.

For more information on the extensive range of Hansford Sensors products, including the HS-100 and HS-150 accelerometers, please visit www.hansfordsensors.com.