High-resolution encoder is claimed to be the world's fastest

Inmoco is enabling OEMs to maxmise the performance of their servo systems with the introduction of the new Mercury 3500Si from MicroE Systems. The 3500Si is claimed to be the first high-performance position feedback encoder to operate at maximum speed and maximum resolution. Employing the industry-standard SPI serial data interface, the Mercury 3500Si is said to be capable of speeds up to 50 times faster than standard A-quad-B output encoders: it can achieve speeds of 7.2m/s while operating at 5nm resolution.

Key to the market-leading performance of the Mercury 3500Si encoders are MicroE System's patented SmartPrecision electronics and PurePrecision optics technologies. These not only give the encoders the widest range of operating speeds and resolutions, but also the advantages of programmability, miniature sensor size, accuracy enhancement, optical index, and broad alignment tolerances for ease of set-up.

In addition to ultra-high-speed operation, the Mercury 3500's SmartPrecision electronics and SmartPrecision software provide robust programmable features. Users can program system resolution in binary steps from x4 to x4096, or 5 microns to 5nm linear; and 6600 to 67.1million counts per revolution rotary.

In addition, a programmable index feature provides users with flexibility in their applications, offering four user-selectable modes, dependent upon the application type and choice. And the SmartPrecision software even displays encoder data in several ways: a Lissajous data plot of raw and corrected signals, position vs signal strength, and position vs velocity.

Complementing the performance advantages of the SmartPrecision and PurePrecisionTM technologies, the Mercury 3500Si employs the industry-standard SPI serial data interface. The advantage of this standard, apart from its speed, is that it is supported by many DSP chip manufacturers, including TI, Motorola and Analog Devices.

Using the interface, encoder position values are digitised and sent directly into the controller's DSP. This provides a robust, reliable and high-speed connection.

In addition to its many performance advantages, the Mercury 3500Si is miniaturised to help OEMs reduce the size of their on-machine servo systems; the 3500Si is claimed to have the smallest high-performance sensor head in the industry, at just 8.4mm high.

The Mercury 3500 also features LED indicators for instrument-free sensor alignment. Users can complete alignment procedures in under 30 seconds. Gain and phase correction are optimised automatically.

The Mercury 3500Si is ruggedised for operation in high-noise environments and is said to deliver best-in-class noise immunity. The SmartPrecision electronics are housed in a metal enclosure, as are sensor electronics, and all cabling is double shielded.

Mercury encoder family

The Mercury encoder family includes 21 models, all of which are claimed to be smaller, faster and smarter than any other encoders on the market. This breadth of product range means that OEM design engineers can select the encoder model that is just right for their application - from programmable, digital, analogue and vacuum models - while enjoying the performance improvements available from Mercury encoders.

Inmoco

4 Brunel Close
Drayton Fields
Daventry
NN11 8RB
UNITED KINGDOM

+44 (0)1327 307600

info@inmoco.co.uk

www.inmoco.co.uk

More from Inmoco

Miniaturisation in motion control

Posted 5 days ago

New compact actuators deliver high force

Posted 1 month ago

Pumping technologies for precise fluid handling

Posted 3 months ago

High force integrated actuator reduces footprint

Posted 7 months ago

Rod-style electric actuators deliver 222kN thrust

Posted 8 months ago

Smooth motion arc segments, 360-deg rotary direct-drive motors

Posted 9 months ago

Agility Series direct-drive motors feature zero cogging

Posted 10 months ago

Voice coil motors offer precision motion in compact package

Posted 11 months ago

Inductive angle encoders are simple, robust and ultra-precise

Posted 1 year ago

Servo systems cables with improved connectors and labelling

Posted 1 year ago

Low-voltage DC servo motors for high-performance machines

Posted 1 year ago

Inmoco offers alternatives for motors no longer available

Posted 1 year ago

What does the future hold for motion control?

Posted 1 year ago

Simple Co-Engineering options for Kollmorgen AKM 2G servo motors

Posted 1 year ago

New stepper motor controller from Inmoco

Posted 2 years ago

Next-generation servomotors raise machine performance

Posted 2 years ago

Next-generation servo motors deliver 30 per cent more torque

Posted 2 years ago

Component compatibility can make or break a good system

Posted 3 years ago

High-performance actuator range is compact and rugged

Posted 3 years ago

Helicopter actuators may also transfer to other applications

Posted 3 years ago

Miniature encoders help advance surgical robot capabilities

Posted 3 years ago

Compact actuators improve aircraft motion systems

Posted 3 years ago

Encoders step up to help miniaturise electronics

Posted 3 years ago

Linear actuator design enables automated maintenance

Posted 4 years ago

Advanced motion cards provide precise actuation

Posted 4 years ago

Compact DA series actuators deliver quality and reliability

Posted 4 years ago

DA99 linear roller screw actuators increase reliability

Posted 4 years ago

DA Series high-performance electric actuators

Posted 4 years ago

New high-performance actuators available in UK

Posted 4 years ago

Servo motor with Ethernet interface connects directly with CNCs

Posted 4 years ago

Heavy duty linear actuator has high-performance controls

Posted 4 years ago

Single cable, multi-axis servo systems gets more power

Posted 5 years ago

Precision motion chips for dedicated controllers

Posted 5 years ago

Hygienic motor range has new feedback and connector options

Posted 5 years ago

Inmoco launches KOLLMORGEN safety feedback option

Posted 5 years ago

MC58113 Series programmable motion control chips

Posted 5 years ago

MicroE Veratus Series encoders: smart and reliable

Posted 5 years ago

Smaller, smarter encoders from Inmoco

Posted 5 years ago

Servo controller doubles power

Posted 5 years ago

Maintenance-free linear motors delivery high power density

Posted 5 years ago

PCB-based options are mighty minis for motor control

Posted 5 years ago

Vacuum-rated encoders from Inmoco

Posted 6 years ago

Minutes to motion - linear positioning explained

Posted 6 years ago

Servo users should not be seduced by power density alone

Posted 6 years ago

Inmoco introduces hygienic motor-gear combination

Posted 6 years ago

Servo technology is moving to a new paradigm

Posted 6 years ago

Compact washdown motor offers excellent performance

Posted 6 years ago

Maintenance-free lifting columns are easy to fit

Posted 6 years ago

Electric actuator optimises machine design and saves energy

Posted 6 years ago

Encoder offers value and performance plus flexible mounting

Posted 6 years ago

User-friendly compact encoder gets new side mount option

Posted 6 years ago

Reduce cabling with distributed servo drives from Inmoco

Posted 6 years ago

New functions make servo super-safe

Posted 7 years ago

Power storage modules act as servo UPS

Posted 7 years ago

Inmoco expands indexer family with motion features

Posted 7 years ago

Motion card integrates amps with full motion control

Posted 7 years ago

Wizard aids easy set-up of embedded motion controllers

Posted 7 years ago

EtherCAT master module for CTC 5300 Blue Fusion controller

Posted 7 years ago

OPC server gives instant access to automation controllers

Posted 7 years ago

Atlas single-axis motion amplifier is multi-talented

Posted 7 years ago

Rotary encoder establishes absolute position at start-up

Posted 7 years ago

Inmoco goes back to BASIC with new programmable servodrive

Posted 7 years ago

Mid-performance, high torque per pound servomotor

Posted 7 years ago

Stepper motors: advanced techniques

Posted 8 years ago

How to calculate point-to-point SCARA movements

Posted 8 years ago

Trombone servo drive range now has increased power

Posted 8 years ago

M4-X DC servomotor range is rugged and high performance

Posted 8 years ago

Achieve smaller, faster, smarter motion control

Posted 8 years ago

Expandable motion control system for extreme conditions

Posted 8 years ago

Elmo Gold Drum HV extends servo drive range to 65kW

Posted 8 years ago

B-Hornet military servo for high-power burst applications

Posted 8 years ago

O.P.S. Optical Encoders can be customised

Posted 8 years ago

ORMEC XD indexer family of servo drives expanded

Posted 8 years ago

Free automation systems control app for iPhone and iPad

Posted 8 years ago

Inmoco's Elmo Gold Servo Drives gain EtherCAT compliance

Posted 8 years ago

Inmoco introduces Elmo's DC Trombone digital servo drive

Posted 8 years ago

Robust linear actuators with integral force measurement

Posted 9 years ago

Energy-efficient IP67 stainless steel servo motors

Posted 11 years ago

Servo drives can be networked with IEEE 1394b

Posted 11 years ago

Wider choice of combined motion control and PLC units

Posted 11 years ago

Electronic cam controller suits labelling and capping machines

Posted 11 years ago

High-resolution encoder offers exceptional versatility

Posted 11 years ago

Elmo Duo controller integrates twin Whistle servo drives

Posted 11 years ago

Compact Guitar servo drive delivers 5kW of power

Posted 11 years ago

Ethernet/IP and Modbus options for multi-axis network manager

Posted 12 years ago

Elmo Solo Whistle saves servo application design time

Posted 12 years ago

New three-axis stepper modules for programmable controller

Posted 12 years ago

Electric linear actuators incorporate force measurement

Posted 12 years ago

Miniature ChipEncoder measures just 7x11mm

Posted 13 years ago

Cost-effective alternative for linear positioning and control

Posted 13 years ago

Rotary actuator includes servo motor, amp and position control

Posted 13 years ago

CANopen and absolute encoder options for digital servo drives

Posted 13 years ago

Programmable encoders feature miniature sensors

Posted 13 years ago

MicroE Systems' Mercury II digital encoder 'sets new benchmark'

Posted 13 years ago

Inmoco introduces ServoWire Motion and Logic Controller

Posted 13 years ago

Inmoco now offers Servotecnica slip rings

Posted 14 years ago

Inmoco launches "world's smallest" 50-nanometre encoder

Posted 14 years ago

More products
10 hours ago
New bifold constant torque hinge improves user experience
Southco has expanded its popular range of position control hinges with a new version that has been specifically designed for fold-out tables in passenger transit interior applications
11 hours ago
New FDA compliant cable entry plates
Foremost Electronics has introduced new KEL-DPZ-HD FDA compliant cable entry plates from icotek, specially developed for the use in the food and pharmaceutical industries
4 days ago
Boxing clever
A new chainflex cable box means big shipping cost savings for customers
4 days ago
New industrial vision online channel sees the light of day
Industrial vision provider IDS is making its expertise as a manufacturer of digital industrial cameras available free of charge and readily accessible on a new platform
4 days ago
Ball screws help protect buildings from earthquakes
Ball screws from NSK are helping to protect structures and people in earthquake zones
4 days ago
ATEX certification for new pneumatic valve island
Pneumatic process control offers numerous benefits, especially in hygienic applications. Bürkert says that its new Type 8652 AirLINE valve island provides users with improved safety features, communications and diagnostics
4 days ago
ABB launches condition-based maintenance service for robots
New service enables users to plan ahead and optimise production performance
4 days ago
What the UK-EU trade deal means for UK vehicle manufacturers
Now the UK has left the EU, the transition period has ended and the two parties have established a new trading relationship, UK-based vehicle manufacturers have some clarity over what they need to do to serve three key markets: Great Britain (England, Scotland and Wales), the EU and Northern Ireland
4 days ago
Farnell publishes Industry 4.0 ebook
New ‘Industry 4.0 Interviews’ ebook is available for free download from Farnell and showcases the opinions of leading global experts on the future of IIoT and Industry 4.0
4 days ago
Can DC motors be used at high temperatures?
There is no need for a heated discussion about it as maxon’s motor expert Andrew Gibson offers a view on the subject