Highly dynamic pressure sensor with 500kHz natural frequency

One characteristic of the 603C PE sensor is its ability to measure small pressure fluctuations, superimposed on a high static pressure, with exceptional resolution. The integrated acceleration compensation ensures reliable measurements even under highly vibrating conditions. Add long life reliability and calibration at 10 per cent and 100 per cent of FSO making the sensor easily matched to changing needs resulting in exceptionally low cost of ownership.

With linearity typically better than +/-0.4 per cent FSO and operating temperature from -196degC to +200degC, the new sensor is big in performance but small in size. A 5.5mm diameter, robust, high-pressure membrane is mounted in a hermetically sealed, welded, stainless steel housing available in both long 37.8mm and the short 15mm long overall versions both with a 6.3mm overall diameter.

The new Type 603C PE pressure sensor has been designed for use with the recently introduced dual-mode LabAmp Type 5165A series for dynamic pressure and the Type 5167A series for both dynamic and quasi-static pressure measurements.

Go to www.kistler.com for more information about the Type 603C PE pressure sensor.