How robots can reduce costs and enhance production flexibility

Barry Weller of Mitsubishi Electric explains how robots can reduce production costs and provide flexibility for future changes in requirements.

UK manufacturing faces a plethora of challenges in its efforts to regenerate, but without doubt one of the most significant is the need to operate in a high-wage economy yet produce goods that are competitive with those from low-wage regions of the world. Clearly, as UK manufacturers cannot match the pay rates of some overseas competitors, the only viable option is to reduce the labour content in UK-manufactured products.

It is not too difficult to see that this means making the maximum possible use of automation, However, just how that automation will be implemented must be carefully considered in the light of a second important requirement in today's manufacturing sector - the need for flexibility.

Once it was satisfactory to build custom-engineered automated production lines dedicated to a particular type and style of product. At that time there would be reasonable confidence that the plant could be used without major changes for five years or longer, which is time enough to recoup the set-up investment. Today's product life cycles are, however, typically much shorter, so production lines in most areas of manufacturing must now be flexible enough to adapt easily and inexpensively to the regular introduction of new products or significant redesigns.

Growth areas

Fortunately, flexibility is one of the major benefits offered by industrial robots, as they are essentially general-purpose tools that can be readily adapted for new tasks simply by reprogramming them. Robots are, therefore, an excellent basis for many modern manufacturing automation systems. With this in mind, it might be expected that robots would have been enthusiastically embraced by UK businesses, but the reality has been rather different. In fact UK manufacturers have been slow in their uptake of robot technology, lagging well behind their competitors in many other developed nations including France, Italy, Spain and Sweden, as well as the more obvious examples of Germany and Japan. There is, however, some evidence that this situation is changing. A recent survey by BARA (the British Automation and Robotics Association) reports that in the first two quarters of 2010, UK robot sales grew by 55 per cent compared with the same period 2009.

Interestingly, BARA notes that most of this growth has come not from the automotive industry, where the use of robots is well established, but from the food and beverage sector, and from the pharmaceutical and healthcare sector. This suggests that a wider cross-section of UK manufacturers is starting to appreciate the benefits that robots can provide.

While these developments are heartening, there is still a long way to go, since BARA also reports that the UK is far from being alone with its current surge of investment in robots. Sales are, in fact, increasing in almost every country; worldwide growth of around 27 per cent is predicted for 2010, with particular strong growth in China, Korea and other South-East Asian countries. Clearly the UK's competitors are not standing still in the quest for efficiency and automation.

Possibly this is an incentive for those businesses that are striving to grow and to enhance their competitive position but are still hesitant about investing in robots. Just in case it is not, let us briefly review the major benefits that modern robots, such as those in Mitsubishi's extensive MELFA family, have to offer.

Benefits of robots

Modern robots combine speed with accuracy, making them suitable for use in even the most demanding of high-volume production applications. And, unlike human employees, robots can operate 24 hours a day, seven days a week, and they never take holidays! Production lines incorporating robots can, therefore, be operated for whatever hours are necessary to satisfy customer demand and to get the best possible return on investment in the production plant.

There is another benefit that is often not fully appreciated: robots are not especially fussy about their working conditions. This means that, in many cases, big economies can be made on the amount of heating and lighting that would be required if human workers were employed to carry out similar tasks. This not only results in lower energy bills, but also in a reduced carbon footprint.

Compact design is another characteristic of modern robots, which means that using them can save valuable space on the factory floor. Often they can also be used in areas such as those adjacent to fast-moving machinery, where a human operator would not be allowed to work unless expensive guarding and other safety features were provided. It is worth noting that today's robots are also suitable for incorporation in existing production lines.

Then there are the issues of reliability and consistent performance. Because the best of modern robots incorporate modern technologies like brushless AC servomotors, they have very long service lives and require little maintenance. In addition, when used in conjunction with absolute position encoders, these servo systems ensure precise and repeatable operation. Scrap and reject rates are, therefore, minimised, once again leading to increased efficiency and reduced costs.

Ethical issues

Finally, some companies still have ethical concerns over the use of robots as they are, more than other form of automation, seen as displacing human operators. In truth, however, robots almost always do repetitive tedious tasks for which it is always understandably difficult to recruit human employees.

And there is another issue: if human operators are used for these menial tasks and are rewarded with even the most modest rate of pay, there is a high probability that the goods produced will be less competitive than those produced on robot lines. This could easily lead to the business shrinking, with a loss of jobs, rather than growth. There are, therefore, sound reasons for arguing that using robots actually protects jobs rather than eliminating them.

Modern robots are affordable, cost-effective in operation, easy to install and set up, versatile, reliable and efficient. They are an excellent choice for a wide range of manufacturing operations in almost every sector - not just the automotive sector with which they are most closely associated - and experienced suppliers such as Mitsubishi are always ready to provide application advice and support.

In short, if the UK manufacturing industry is to make the most of its current opportunities for growth, which are better than it has seen for decades, it must be prepared to wholeheartedly embrace the unparalleled benefits that robot-based automation offers.

Contact Mitsubishi or visit the website for more information about the company's robots.

Mitsubishi Electric Europe B.V.

Travellers Lane
AL10 8XB

+44 (0)1707 288780

More technical articles
2 hours ago
NSK roller guides increase uptime of blow moulding machines
A manufacturer of PET (polyethylene terephthalate) bottles frequently had to replace the linear guides on its blow moulding machines. However, after switching to NSK’s RA series roller guides, there have been no failures for over a year, producing annual cost savings in maintenance, spare parts and downtime of €60,000.
4 hours ago
Design your future at Design Engineering Expo 2022
With innovation at its core, Design Engineering Expo 2022 is the perfect place for forward thinking design engineering professionals to gain insight into new technologies, learn how to improve efficiencies and gain inspiration for ideas they can implement into their workplace, to put them ahead of their competitors and form part of their future strategy.
5 hours ago
Tray handling system gently handles medical-use glass cartridges
Gerresheimer Medical Systems Division produces over one billion high quality, medical grade, glass cartridges every year and central to its new post-production inspection and packaging system is the IEF Werner varioSTACK CF (Clean Factory) tray palletiser.
1 day ago
WDS reinforces stock availability with production machine upgrade
WDS Components has strengthened its stock availability of standard parts and components by upgrading its on-site production machinery.
1 day ago
Bostik present details of new 2K cyanoacrylate prototype
Bostik’s Born2Bond R&D team has released details of a new cyanoacrylate-based adhesive prototype at the ‘in-adhesives’ event, proving how products are being developed for a near-future that will see instant adhesives used for long-term critical applications.
4 days ago
Virtual factory and showroom tours provide access to best practices
Mitsubishi Electric is opening up access to its factory automation sites and showrooms through virtual tours with the aim of overcoming the restrictions on in-person visits caused by the pandemic.
5 days ago
Food-safe, tribo-optimised coating increases packaging throughput
A packaging and processing machinery builder has reduced drag, improved rigidity, increased throughput and raised hygiene standards on one machine family by applying an iglidur IC-05 tribo-coating on a mitre bar application.
5 days ago
Unlocking the benefits of micromotors at Design Engineering Expo
Small DC motor supplier EMS will be exhibiting the Faulhaber BXT-SC series and the AM3248 stepper motor at this year’s Design Engineering Expo, taking place at the NEC in Birmingham on June 8 to 9, 2022.
5 days ago
Advanced Engineering partners with SMMT and ADS
At this year’s Advanced Engineering UK, held at the NEC, Birmingham on 2-3 November, automotive and aerospace businesses will have the opportunity to meet with buyers from the sectors’ leading OEMs.
6 days ago
Telford based supplier has a handle on Truckman Tops
One of the UK’s best-known brands in the automotive aftermarket industry is Truckman, and the company’s new Truckman Classic hardtop for the Isuzu D-Max now features Vector T3 locking handles supplied by Industrilas.

Login / Sign up