How to prevent operator bypass
The Engineering Network Ltd
Posted to News on 15th Jul 2024, 10:00

How to prevent operator bypass

Safety guard interlocks help protect operators when working with rotating equipment and other high-risk machinery. However, interlocks are vulnerable to manipulation, putting operators in danger from unsafe machinery. To prevent this issue, David Dearden, Managing Director of Euchner UK, offers suggestions on how machine builders can prevent operator bypass.

How to prevent operator bypass

(See Euchner at Machine Building North, 10 April 2025, on stand 37)

There are many reasons operators may want to bypass guard interlocks, and often it comes down to efficiency. For example, staff may want to keep a robot cell door open so they can perform maintenance without having to shut down a machine.

When designing equipment that includes safety interlocks, machine builders must comply with ISO 14119:2013, which requires the likelihood of overriding to be considered.

If the motivation is foreseeable, for example, if an operator is paid based on piece work, machine builders must take further measures, and it's important for both safety and compliance to know what these are.

Safeguard actuators and switches

Typically, safety interlocks consist of a safety switch and an actuator. If the actuator is accessible, there may be a greater motivation to remove and use it to bypass the interlock. One option is hiding the actuator in the door frame, so operators don't know it's there. However, often when they see non-contact switches, operators may remove the actuator and tape it to the switch so the door can open and close without breaking the safety circuit.

Because of this, it is important to secure the actuator to prevent its removal. A common approach is to use non-reversible screws to bolt the actuator in place so that operators can't unscrew it, even with a slotted or Pozidriv screwdriver. Alternatively, embedding the safety devices in the machine's frame out of sight could help prevent manipulation.

Even if the actuator is hidden from view, this may not stop maintenance staff and other operators from using a spare actuator as an override key. If they do, the guard system may not know that the safety signal was being manipulated, which could leave the robot cell and operators vulnerable.

Some interlocks with RFID technology have unique coding, whereby the actuator is paired to a specific switch. This prevents spare actuators from being used to override guard interlocks.

There are two types of coding: Multicode, typically found in applications where manipulation is of a lower concern, and Unicode for more high-risk environments. Though highly secure, any compatible actuator would work with a Multicode switch, meaning operators could buy a replacement and the switch would recognise it. This is not the case with Unicode.

If there is a high risk of manipulation, machine builders should use a Unicode interlock. These minimise the risk of tampering by replication because each actuator must be assigned to a specific safety switch.

There are safe ways for overriding interlocks when required, for maintenance or commissioning, for example. RFID systems, such as the CKS2 from Euchner, have benefits over traditional key switches because they avoid duplication.

Incorporate startup tests

Incorporating a startup test into the control system can help discourage operators from tampering with switches or actuators. For example, a startup test could require each guard to open and close at the start of every shift, so, if an operator did remove an actuator and tape it to the switch, it would be easier to spot. First, they would need to un-tape the actuator and put it in its original place ready for the test, before removing it again and re-taping it after the test to continue bypassing.

Startup tests are especially beneficial in machine tool, packaging and automotive plants where machines run for several hours. Longer shifts mean wide windows for override attempts, but startup tests can be surprisingly effective at discouraging operators from manipulating safety devices.

To protect operators, machine builders must consider the motivation for bypass - ISO 14119:2013 compliance requires it. If override motivation is 'foreseeable', options include incorporating startup tests, strategically placing actuators and using Unicode interlocks.


Euchner UK Ltd

Capstone House
Dunston Way
S41 9RD
UNITED KINGDOM

+44 (0)114 256 0123

The Engineering Network Ltd SICK (UK) LTD ABSSAC Ltd Mechan Controls Ltd Euchner UK Ltd Procter Machine Safety KEB (UK) Ltd Lenze Selection (a Division of Lenze Ltd) FATH Components Ltd Smartscan Ltd ifm electronic Limited Leuze electronic Ltd HARTING Ltd Kawasaki Robotics (UK) Ltd Phoenix Contact UK Aerotech Ltd Heidenhain (GB) Ltd Rittal Ltd Pilz Automation Technology STOBER Drives Ltd Murrelektronik Ltd PI (Physik Instrumente) Ltd
The Engineering Network Ltd