Is Gigabit Industrial Ethernet key for Industry 4.0 goals?

While there may still be some debate about what Industry 4.0 really means, there is no denying that greater interconnectivity of devices and increased network capability will be the key drivers behind achieving the goals it sets out. John Browett, CLPA Europe General Manager, outlines the network requirements that will enable Industry 4.0.

As manufacturers examine future challenges around low-volume production, increased customisation and increased competition, it is easy to understand why the concepts of Industry 4.0 have come to the fore. Industry 4.0, combined with the Industrial Internet of Things (IIoT), not only holds the key to addressing many of these challenges, but also promises to deliver innovations that today's manufacturers have not even thought of yet.

Industry 4.0 can be defined as the combination of "cyber-physical" systems with the IIoT. Underpinning it are Ethernet and Internet-based technologies that provide the connectivity for everything to communicate with everything else, regardless of "˜where' a device or system is physically, or, "˜what' it actually is. Today, while we talk about high levels of interconnectivity, usually there are incompatibilities in networks and technologies that mean projects are divided into separate islands.

As we overcome these incompatibilities and drive ever greater levels of integration and interconnectivity, Industry 4.0 will allow production machines to provide more transparency and cooperate to a higher degree. Some say that this will ultimately lead to intelligent factories capable of autonomous production changeovers, reassignment of production equipment and perhaps even scaling their capacity as demand increases. By extension, this will also take in the Internet and collaboration with vendors and customers to a greater degree than is possible now.

None of this can happen, though, without the networks to carry the information between the places where it's needed, in real-time. Ethernet provides a good foundation for this infrastructure, but being able to deliver the necessary performance will require technology with greater capabilities than is common now. CC-Link IE, however, can meet all of these requirements today.

Gigabit Ethernet standard for automation

One of the key requirements of Industry 4.0 applications is the need to share large amounts of data from multiple devices in real time. Hence bandwidth is critical to the successful operation of these systems. CC-Link IE is the world's first and only open gigabit Ethernet standard for automation. As such, it offers a performance increase of around 10 times compared to any other similar protocol today. Further, CC-Link IE has the highest bandwidth available at 1Gbps, delivering the performance needed to connect the most data-hungry processes together.

CC-Link IE is based on the Ethernet standard IEEE 802.3, and allows for ring, line and star topologies. In addition, the line and star topologies can be combined together to provide systems that offer the maximum application flexibility. The ring and line connections are particularly attractive, as they permit simple "˜daisy chaining' of devices, meaning the added cost and complexity of network switches can be avoided.

Addressing cyber security concerns

One of the key concerns related to the increasing adoption of industrial Ethernet is cyber security. While the use of Internet-based technologies has increased the possibilities of what can be achieved in manufacturing, it has also increased the threats.

Some industrial Ethernet protocols are based on a standard TCP/IP (UDP/IP) stack, which can arguably cause some security vulnerabilities. CC-Link IE combines the physical and data-link layers of the OSI hierarchy with an open protocol that extends from the network to application layers. The result is an open, but controlled knowledge base that CLPA partners are free to implement, but reduces the exposure to unauthorised use. Another concern potential users may have regarding the protocol is its compatibility with TCP/IP (UDP/IP) traffic. While current network design practice encourages segmentation of networks for security and performance reasons, sometimes it's still necessary to support non-control related network traffic. CC-Link IE supports this with the capability to encapsulate TCP/IP (UDP/IP) packets for transmission across the network, thus allowing this traffic to "˜tunnel' through the CC-Link IE system.

CC-Link IE also allows considerable application flexibility by supporting multiple protocol types on the same network. This reduces costs and increases maintainability. In addition to the standard I/O control, it also offers safety (SIL3), motion control and energy management on the same cable. This allows the CLPA to offer a cost-effective, simplified, flat network architecture that meets the needs of nearly all applications in the discrete sector.

Speed and simplicity

When it comes to actually using the network, again, the emphasis is on simplicity. CC-Link IE's basic communication technique is based on a shared memory model. All the devices on the network occupy an area of the controller's memory. To communicate with them, it's only necessary to change the value of the data in the area corresponding to the relevant device. The network automatically handles the traffic via the standard "˜cyclic' (synchronous) communication.

The same process happens in reverse for communication to the controller from devices. For high-priority, unscheduled events such as alarms, or lower priority non-cyclic transmissions such as diagnostic information, an alternative "˜transient' (asynchronous) communication method is available. The technology has been designed such that even high levels of transient traffic do not impact the deterministic regular cyclic communication, meaning normal system functions are not impaired and the scan cycle is completely deterministic.

Deterministic performance is achieved with a token passing method, allowing dependable system operation. In practice, this allows network update times to occur in a few tens of microseconds, depending on system size and configuration. CC-Link IE also offers the ability for redundant controllers, so even a controller failure will not necessarily result in lost production.

We can see, then, that CC-Link IE can help manufacturers reap the benefits of greater connectivity across their processes, with improved network performance delivering tighter control, greater data throughput at high speed, deterministic performance and inherent security. It is also set to play a key role as manufacturers push towards models of Industry 4.0 in order to address the production challenges of tomorrow.

More information about CC-Link IE can be found at www.clpa-europe.com.

CC-Link Partner Association - Europe (CLPA)

Gothaer Strasse 8
40880 Ratingen
GERMANY

+44 (0)7768 338708

partners@clpa-europe.com

www.clpa-europe.com

More from CC-Link Partner Association - Europe (CLPA)

Time Sensitive Networking – what’s in it for machine builders?

Posted 3 months ago

CLPA creates Global Strategic Advisor role for Smart Factories

Posted 9 months ago

Benefits of TSN discussed at ARC Industry Forum Europe 2019

Posted 1 year ago

CLPA to show Ethernet innovation at SPS IPC Drives Italia 2019

Posted 1 year ago

CC-Link IE TSN attracts attention at Hannover Messe

Posted 1 year ago

Why is 100Mbit industrial Ethernet insufficient for Industry4.0?

Posted 1 year ago

Why open industrial networks are essential for Smart Factories

Posted 1 year ago

CC-Link IE TSN: the next-generation Ethernet-based network

Posted 2 years ago

Factory networks take a big step forward at SPS 2018

Posted 2 years ago

CC-Link IE is Mitsubishi's network of choice for Industry 4.0

Posted 2 years ago

Slip rings use CC-Link IE for gigabit data transfer

Posted 2 years ago

Coupler enables interoperability between CC-Link IE and Profinet

Posted 2 years ago

CLPA highlights growth of CC-Link IE development options

Posted 3 years ago

CLPA OPC UA companion specification for CSP+ for Machine

Posted 3 years ago

Working group: security for open industrial automation networks

Posted 3 years ago

Hilscher plans first "˜coupler' between CC-Link IE and PROFINET

Posted 3 years ago

Benefits of open gigabit Ethernet illustrated at ARC Forum

Posted 3 years ago

Integrated factory automation networks key to Industry 4.0

Posted 3 years ago

CC-Link Partner Association at SPS Italia 2017

Posted 3 years ago

Implementing Ethernet at the field device level

Posted 3 years ago

Working with multiple networks and growth in Asia

Posted 3 years ago

CLPA webinar shows benefits of open gigabit industrial Ethernet

Posted 3 years ago

Weidmüller develops CC-Link IE products to drive Industry 4.0

Posted 4 years ago

New CC-Link IE and Profinet interoperability specification

Posted 4 years ago

CLPA brings networking accessibility to SPS/IPC/Drives 2016

Posted 4 years ago

CLPA helps cable manufacture expand into Asian markets

Posted 4 years ago

Balluff I/O blocks enable quicker CC-Link IE network building

Posted 4 years ago

CC-Link IE and CC-Link adoption soars

Posted 4 years ago

Production machines and automation products for the Asian market

Posted 4 years ago

PROFINET and CC-Link IE cooperation will expand open networks

Posted 4 years ago

Twelve things you need to know about CC-Link networks

Posted 4 years ago

CLPA to show CC-Link IE and CC-Link open at SPS Italia

Posted 4 years ago

Reports of fieldbuses' usage disappearing are premature

Posted 4 years ago

OPC Foundation and CLPA sign Memorandum of Understanding

Posted 4 years ago

CC-Link Partner Association (CLPA) opens office in Mexico

Posted 4 years ago

Lapp Group grows with CC-Link IE & CC-Link

Posted 4 years ago

White paper previews CC-Link IE and PROFINET interoperability

Posted 4 years ago

CC-Link IE - the natural choice for Industry 4.0

Posted 4 years ago

SLMP for integrating FAG SmartCheck into industrial automation

Posted 5 years ago

CC-Link keeps up with demand for water in Denmark

Posted 5 years ago

CC-Link Partner Association marks its 15th anniversary

Posted 5 years ago

Major Asian and European network collaboration announcement

Posted 5 years ago

Changes in the network security landscape

Posted 5 years ago

CC-Link IE and CC-Link set new record for global installed base

Posted 5 years ago

CC-Link Partner Association brings on Cisco as Board member

Posted 5 years ago

Global networking specialist acknowledges importance of CC-Link

Posted 5 years ago

Building chips for CC-Link IE is good for business at Renesas

Posted 5 years ago

SLMP for CC-Link IE: exploit open industrial Ethernet protocol

Posted 5 years ago

CC-Link IE wins IEC61158/IEC61784 certification

Posted 5 years ago

More development options for CC-Link, CC-Link IE device makers

Posted 5 years ago

One year on, the CLPA's Gateway to Asia is still wide open

Posted 5 years ago

Double link strengthens approach to Asian automation

Posted 5 years ago

The future of open automation networks - gigabit CC-Link IE

Posted 6 years ago

Molex becomes a CLPA board member

Posted 6 years ago

CC-Link opens up Asian markets for measurement specialist

Posted 6 years ago

CC-Link plans major board member announcement at SPS/IPC/Drives

Posted 6 years ago

Skydivers practise indoors with CC-Link industrial network

Posted 6 years ago

CC-Link gives Cognex a clear view of Asian opportunities

Posted 6 years ago

New CLPA Chair is world-renowned production engineer

Posted 6 years ago

CC-Link partner Festo is using nature to inspire automation

Posted 6 years ago

Conformance testing ensures clear open communications

Posted 6 years ago

Industrial Ethernet connects systems, improves energy efficiency

Posted 6 years ago

Safety networks: The route from zero accidents to zero risk

Posted 6 years ago

CLPA announces EUR10,000 support for CC-Link product developers

Posted 6 years ago

CC-Link opens actual Gateway to Asia with new Turkish branch

Posted 6 years ago

CLPA appoints first European member to Managing Board

Posted 7 years ago

Open industrial networking associations ASI and CLPA forge links

Posted 7 years ago

Industrial automation changes up a gear with CC Link

Posted 7 years ago

CC-Link seminar explores opportunities for growth in Asia

Posted 7 years ago

Berners joins CLPA to help companies export to China

Posted 7 years ago

CLPA unveils major developments at the SPS IPC Drives 2013 Fair

Posted 7 years ago

Car manufacturer sees benefits via use of CC-Link open networks

Posted 7 years ago

Multiple approvals enhance CC-Link's global acceptability

Posted 7 years ago

CC-Link membership booms as interest in open networks grows

Posted 7 years ago

Sensors and communications combine to improve production hygiene

Posted 7 years ago

CC-Link widens partner product development options

Posted 8 years ago

CC-Link highlights industry solutions with key European partners

Posted 8 years ago

CC-Link expands horizons with management board appointments

Posted 8 years ago

Learn more about CC-Link anytime, anywhere with a virtual booth

Posted 8 years ago

Indian sub-continent gets local support for CC-Link

Posted 8 years ago

CC-Link adds energy management capabilities

Posted 8 years ago

CLPA shares open networks for success at the 2012 EMS Summit

Posted 8 years ago

CC-Link helps Ford & Mazda stay flexible in China

Posted 8 years ago

Energy management and FPGA on show at SPS/IPC/Drives Fair

Posted 8 years ago

Free Gateway to China business kit on 4GB USB stick

Posted 8 years ago

Strengthening the CC-Link open network partnership

Posted 8 years ago

CC-Link sponsors major European manufacturing summit

Posted 8 years ago

Gateway to China from the CLPA for potential new markets

Posted 8 years ago

White Paper explores strategies for entering the Chinese market

Posted 8 years ago

Starter kits make CC-Link adoption a simple step

Posted 8 years ago

CC-Link IE Field Ethernet-based network gains motion control

Posted 8 years ago

CC-Link enhances productivity for flat-panel LCD plant

Posted 8 years ago

SIL 3 safety layer added to CC-Link IE Field Industrial Ethernet

Posted 8 years ago

CLPA celebrates 10th anniversary of CC-Link

Posted 9 years ago

CC-Link becomes 'The Non-Stop Open Network'

Posted 9 years ago

CLPA to promote FDT as an international standard

Posted 9 years ago

Mitsubishi opens CC-Link conformance test centre in Germany

Posted 9 years ago

Financial benefits of retrofitting open fieldbus networks

Posted 9 years ago

CC-Link to be incorporated within FDT protocol standard

Posted 9 years ago

Automation and robotics training centre features CC-Link

Posted 9 years ago

CC-link exceeds 1500 members and 8,500,000 devices

Posted 9 years ago

Open architecture control systems offer plant-wide benefits

Posted 9 years ago

CLPA-China celebrates ten years of CC-Link in China

Posted 9 years ago

Free webinar explains CC-Link 'Gateway to China' programme

Posted 9 years ago

'Gateway to China' programme to feature at SPS/IPC/Drives

Posted 9 years ago

CLPA offers three chances to win an iPad

Posted 9 years ago

'Gateway to China' movie helps companies enter Chinese market

Posted 9 years ago

CC-Link network supports automation of winemaking

Posted 9 years ago

John Browett named Acting General Manager of CLPA - Europe

Posted 9 years ago

CC-Link selected for biogas cogeneration plants

Posted 10 years ago

New Anybus-CC drive profile modules for CC-Link

Posted 10 years ago

Heavy-duty CC-Link I/O modules are sealed to IP67

Posted 10 years ago

CC-Link selected for crane upgrade project

Posted 10 years ago

CC-Link survives in harsh die casting environment

Posted 10 years ago

CC-Link helps maintain productivity and quality in pharma plant

Posted 10 years ago

CC-Link connects eleven Danish boreholes

Posted 12 years ago

CC-Link network expands to encompass entire factory

Posted 12 years ago

CC-Link connects conveyor inverters to PLC network

Posted 12 years ago

CC-Link helps to ensure reliability of pumping station

Posted 12 years ago

A guide to the CC-Link industrial fieldbus network

Posted 12 years ago

Integrator GB Innomech uses CC-Link for building control

Posted 12 years ago

CLPA offers assistance to UK OEMs selling into Asia

Posted 12 years ago

New version of CC-Link based on Industrial Ethernet

Posted 12 years ago

Using fieldbuses with multi-vendor automation systems

Posted 12 years ago

European applications for the CC-Link industrial fieldbus

Posted 13 years ago

New CLPA office supports use of CC-Link in Turkey

Posted 13 years ago

CC-Link adopted by Polish universities

Posted 13 years ago

CLPA to show CC-Link IE at SPS/IPC/Drives show

Posted 13 years ago

CC-Link partners launch new safety fieldbus, CC-Link Safety

Posted 13 years ago

CLPA sponsors European Manufacturing Strategies Summit

Posted 13 years ago

More technical articles
1 day ago
Boxing clever
A new chainflex cable box means big shipping cost savings for customers
1 day ago
New industrial vision online channel sees the light of day
Industrial vision provider IDS is making its expertise as a manufacturer of digital industrial cameras available free of charge and readily accessible on a new platform
1 day ago
Ball screws help protect buildings from earthquakes
Ball screws from NSK are helping to protect structures and people in earthquake zones
1 day ago
ATEX certification for new pneumatic valve island
Pneumatic process control offers numerous benefits, especially in hygienic applications. Bürkert says that its new Type 8652 AirLINE valve island provides users with improved safety features, communications and diagnostics
1 day ago
ABB launches condition-based maintenance service for robots
New service enables users to plan ahead and optimise production performance
1 day ago
What the UK-EU trade deal means for UK vehicle manufacturers
Now the UK has left the EU, the transition period has ended and the two parties have established a new trading relationship, UK-based vehicle manufacturers have some clarity over what they need to do to serve three key markets: Great Britain (England, Scotland and Wales), the EU and Northern Ireland
1 day ago
Farnell publishes Industry 4.0 ebook
New ‘Industry 4.0 Interviews’ ebook is available for free download from Farnell and showcases the opinions of leading global experts on the future of IIoT and Industry 4.0
1 day ago
Can DC motors be used at high temperatures?
There is no need for a heated discussion about it as maxon’s motor expert Andrew Gibson offers a view on the subject
2 days ago
Switching up a gear
Phoenix Contact is expanding its line of unmanaged switches
2 days ago
New Intertronics metering, mixing and dispensing system
Adhesives supplier Intertronics has introduced a new 2-K-DOS metering, mixing and dispensing system, said to be a compact, benchtop unit suitable for materials including silicones, polyurethanes and epoxies