Kistler at Interplas 2017: ComoNeo, the next generation

On Stand G80 at Interplas 2017, Kistler Instruments will be showing the latest version of its ComoNeo cavity pressure monitoring system with enhanced capability to meet the needs of today's injection moulding industry. Easily configured to meet specific user needs with up to 32 inputs for piezoelectric cavity pressure sensors, 16 inputs for temperature measurement and 4 analogue voltage channels for machine signals, such as screw position and machine pressure, moves automated production process monitoring into a whole new dimension. The ComoNeo is the system of choice for any injection moulding company that aims to optimize monitoring and analysis of the moulding process to permanently cut costs by increasing productivity and removing defects at the earliest stage in the production process.

Easy to operate, ComoNeo monitors the profile of cavity pressure in real-time with graphical display makes it easy to identify process fluctuations. Integrated data storage allows recording of curve histories with at least 50,000 cycles. Curve superimposition and a host of other useful functions (changeable colour schemes to display curves, cycle comments, cursor functions, etc.) allow detailed analysis directly on the injection moulding machine. The design of the software is predicated on operational simplicity by using advanced technology to minimising the need for manual input. In addition to making the initial setup faster and more accurate, this approach ensures that the production process is monitored with high precision, false rejects reduced and faulty components eliminated from production line. Reducing false rejects and eliminating out of spec products are the two most crucial factors in cutting production costs and increasing productivity in the injection moulding process.

The overview screen, the "dashboard", collates all the relevant process data to give a clear picture of how the current production is progressing allowing the user to detect process fluctuations very quickly. Users can also navigate directly from the dashboard to the detailed data and the operating controls and procedures are consistently geared to the injection moulding process, for instance, the performance of an individual cavity can be analysed.

Automatic mould identification reduces toolchange times and prevents errors on the interface between the mould and the ComoNeo system to maximise production efficiency in the injection moulding process whilst the hardware and software allow more cavities to be monitored bringing automatic product quality assurance to large, multi-cavity operations whilst the optimised touch screen display provides a comprehensive interface that can be adapted to meet specific operational needs. The system may be expanded using the CoMo DataCenter to network all the ComoNeo devices and, where needed, the MultiFlow module may be integrated to provide automatic hot runner balancing based on cavity pressure.

By ensuring maximum production efficiency and minimum reject rates, the Kistler ComoNeo monitoring system is the natural choice for quality conscious injection moulding companies which demand high standards of productivity and product quality. The objective of Kistler's development of cavity pressure monitoring has always been the achievement of "Zero Defect" which the ComoNeo system now delivers at lower capital cost than other systems, including vision systems.

More information about the ComoNeo cavity pressure monitoring system is available from www.kistler.com, or you can visit the company on Stand G80 at Interplas 2017.

Kistler Instruments Ltd

13 Murrell Green Business Park
London Road
Hook
RG27 9GR
UNITED KINGDOM

+44 (0)1256 741550

sales.uk@kistler.com

www.kistler.com

More from Kistler Instruments Ltd

Kistler launches world's first charge amplifier with IO-Link technology

Posted 3 months ago

Measuring vibrations at up to 1000° Celsius is no great shakes

Posted 3 months ago

Kistler launches KiDAQ modular data acquisition system

Posted 1 year ago

Kistler NCFE servopress offers advantages over other presses

Posted 1 year ago

Miniature force sensor for quasi-static and dynamic loads

Posted 1 year ago

Kistler acquires AMS for its Big Data expertise

Posted 1 year ago

Kistler launches KiDAQ modular data acquisition system

Posted 1 year ago

A quantum leap towards Smart Automation and Industry 4.0

Posted 2 years ago

New accelerometers monitor vibration at very high temperatures

Posted 2 years ago

Kistler launches world's first high-temperature accelerometer

Posted 2 years ago

MEMS single-axis accelerometer has wide frequency range

Posted 2 years ago

MicroDyn: the world's smallest cutting force meter

Posted 2 years ago

Accelerometer combines low noise with wide range from DC to 2kHz

Posted 2 years ago

Combined pressure and temperature sensor for composite moulding

Posted 2 years ago

Highly dynamic pressure sensor with 500kHz natural frequency

Posted 2 years ago

Kistler's digital charge amplifier sets a new standard

Posted 3 years ago

New digital industrial charge amplifier Type 5074A from Kistler

Posted 3 years ago

Kistler unveils new products at Space Tech Expo Europe

Posted 3 years ago

LabAmp 5167A with Fischer-connector and DynoWare from Kistle

Posted 3 years ago

Kistler Group acquires Vester Elektronik GmbH

Posted 3 years ago

Interplas paper to show cavity pressure monitoring developments

Posted 3 years ago

Sponsorship provides sensor technology for student motorsport

Posted 3 years ago

Kistler Group acquires IOS GmbH

Posted 3 years ago

Miniature sensor for very low force measurement applications

Posted 3 years ago

Miniature triaxial accelerometer for high-temp applications

Posted 3 years ago

Kistler Instruments at Manufacturing & Engineering North East

Posted 3 years ago

A precision accelerometer for when it gets really, really cold

Posted 3 years ago

Piezoelectric strain sensor has fully digital charge amplifier

Posted 3 years ago

Control 2017: Kistler showcases cutting-edge testing technology

Posted 3 years ago

New pressure and temperature sensor for composite moulding

Posted 3 years ago

Kistler Group acquires Schatz Group

Posted 3 years ago

Production monitoring for zero defect output: free workshop

Posted 4 years ago

Dual-range, user-customisable sensor measures torque and speed

Posted 4 years ago

Thermoacoustic pressure sensors for harsh conditions up to 700 °C

Posted 4 years ago

Kistler to showcase latest technologies at Motek

Posted 4 years ago

Kistler Instruments at Sensors & Instrumentation 2016

Posted 4 years ago

Kistler's Correvit SFII sensor measures world record

Posted 4 years ago

Piezoelectric dynamometer for use in high-performance cutting

Posted 4 years ago

Rotating torque sensor has wireless signal transmission

Posted 4 years ago

Kistler at the Manufacturing & Engineering North East Show

Posted 4 years ago

New KiTorq torque measuring flange from Kistler

Posted 5 years ago

Kistler launches new Signal Conditioning Platform

Posted 5 years ago

M6 absolute pressure sensor with temperature probe from Kistler

Posted 5 years ago

Kistler to unveil new NCFR Joining Module at Motek

Posted 5 years ago

Kistler to unveil new ComoNeo process monitoring system

Posted 5 years ago

Kistler to showcase three product innovations at Motek 2015

Posted 5 years ago

Very small pressure pulses are no problem for new sensor

Posted 5 years ago

Three new Kistler products at Sensors & Instrumentation Show

Posted 5 years ago

New rotating dynamometer handles very high cutting force

Posted 5 years ago

Book now for free production monitoring seminar/workshop

Posted 5 years ago

Piezoresistive single-channel amplifier from Kistler

Posted 5 years ago

Portable reference shaker has selectable frequency and amplitude

Posted 5 years ago

Non-contact signal transmission for same cost as slip-ring types

Posted 5 years ago

New miniature low-level force sensor from Kistler

Posted 5 years ago

Measuring with piezoelectric sensors has never been so easy

Posted 5 years ago

Kistler Instruments and Toolex bring Hi Tech to hand presses

Posted 6 years ago

Kistler pressure sensors for ATEX zoned hazardous environments

Posted 6 years ago

Kistler extends its miniature triax accelerometer range

Posted 6 years ago

Kistler's calibration accelerometer uses innovative shear design

Posted 6 years ago

New Kistler charge amplifier module for NI CompactRIO

Posted 6 years ago

New products from Kistler at Automotive Engineering Show 2014

Posted 6 years ago

25 per cent discount on Kistler force-measuring seminars

Posted 6 years ago

Kistler at Sensors & Instrumentation Exhibition 2014

Posted 6 years ago

Kistler showcases production process control and monitoring

Posted 6 years ago

Battery powered reference shaker is self-contained and portable

Posted 6 years ago

25 per cent discount available on Kistler seminar bookings

Posted 6 years ago

Kistler strain sensors monitor welding of 'difficult' materials

Posted 6 years ago

Kistler sensors provide precision for testing impact protection

Posted 6 years ago

Acoustic emission sensor for condition monitoring

Posted 6 years ago

Miniature triaxial accelerometers can take the heat

Posted 7 years ago

Kistler press force sensors have switchable ranges

Posted 7 years ago

Cost-optimised electro-mechanical joining module from Kistler

Posted 7 years ago

Kistler torque sensor used in supercharger research

Posted 7 years ago

Kistler Instruments to lead seminar at Sensors & Instrumentation

Posted 7 years ago

Kistler KiTorq torque sensor has upgraded communication

Posted 7 years ago

One-day seminar: force measurement using piezoelectric sensors

Posted 7 years ago

Piezoelectric cutting force dynamometer reduces tool design cost

Posted 7 years ago

K-Beam single-axis, sensitive accelerometer from Kistler

Posted 7 years ago

Kistler builds on success of maXYmos concept

Posted 7 years ago

Multi-component force plates for gait and balance analyses

Posted 7 years ago

maXYmos BL makes cost-effective quality assurance possible

Posted 7 years ago

Kistler KiTorq gets extended measuring ranges

Posted 7 years ago

Kistler upgrades its press force sensor range

Posted 7 years ago

One-day seminar - force measurement using piezoelectric sensors

Posted 8 years ago

Torque sensor revs up to 50,000 rpm and has two ranges

Posted 8 years ago

Precision assembly is key to novel fuel injection system

Posted 8 years ago

New differential pressure sensors from Kistler Instruments

Posted 8 years ago

New low-cost Kistler NC Electromechanical Joining Module

Posted 9 years ago

Safety module designed for semi-automatic joining systems

Posted 10 years ago

IP68 triaxial accelerometers with extended temperature range

Posted 10 years ago

Force sensors designed for production monitoring

Posted 10 years ago

PiezoStar accelerometers shown at Mtec 2010

Posted 10 years ago

Improved 3-component force links offer higher performance

Posted 10 years ago

Torque sensor flange can be installed from one side

Posted 10 years ago

Colour display is designed for industrial process monitoring

Posted 10 years ago

Ultra-sensitive sensor measures tension and compression

Posted 10 years ago

Non-contact torque sensors cost the same as slip ring types

Posted 10 years ago

Press-fit modules incorporate force/displacement control

Posted 10 years ago

Modular three-component dynamometer for machining forces

Posted 10 years ago

See Kistler's electromechanical joining module at Mtec 2009

Posted 12 years ago

Piezoelectric force sensors cope with production environments

Posted 12 years ago

Self-contained sensor monitors tool loading

Posted 12 years ago

Electromechanical joining module applies low loads

Posted 12 years ago

New electro-mechanical joining systems

Posted 12 years ago

Piezoelectric strain transmitter features integral amplifier

Posted 12 years ago

Clamping force tester aids spot welding quality

Posted 13 years ago

Enhance joint quality with force and torque monitoring

Posted 13 years ago

Mini-Smart torque sensor includes wireless data transmission

Posted 13 years ago

Miniature IEPE accelerometers offered with TEDS option

Posted 13 years ago

Force sensors suit press-fit monitoring applications

Posted 13 years ago

Kistler shows Mini-Smart torque sensor at Mtec 2007

Posted 13 years ago

Sensors monitor forces in clinching processes

Posted 14 years ago

Press force calibration sensors handle loads up to 8000t

Posted 14 years ago

More news
14 hours ago
New bifold constant torque hinge improves user experience
Southco has expanded its popular range of position control hinges with a new version that has been specifically designed for fold-out tables in passenger transit interior applications
15 hours ago
New FDA compliant cable entry plates
Foremost Electronics has introduced new KEL-DPZ-HD FDA compliant cable entry plates from icotek, specially developed for the use in the food and pharmaceutical industries
4 days ago
Boxing clever
A new chainflex cable box means big shipping cost savings for customers
4 days ago
New industrial vision online channel sees the light of day
Industrial vision provider IDS is making its expertise as a manufacturer of digital industrial cameras available free of charge and readily accessible on a new platform
4 days ago
Ball screws help protect buildings from earthquakes
Ball screws from NSK are helping to protect structures and people in earthquake zones
4 days ago
ATEX certification for new pneumatic valve island
Pneumatic process control offers numerous benefits, especially in hygienic applications. Bürkert says that its new Type 8652 AirLINE valve island provides users with improved safety features, communications and diagnostics
4 days ago
ABB launches condition-based maintenance service for robots
New service enables users to plan ahead and optimise production performance
4 days ago
What the UK-EU trade deal means for UK vehicle manufacturers
Now the UK has left the EU, the transition period has ended and the two parties have established a new trading relationship, UK-based vehicle manufacturers have some clarity over what they need to do to serve three key markets: Great Britain (England, Scotland and Wales), the EU and Northern Ireland
4 days ago
Farnell publishes Industry 4.0 ebook
New ‘Industry 4.0 Interviews’ ebook is available for free download from Farnell and showcases the opinions of leading global experts on the future of IIoT and Industry 4.0
4 days ago
Can DC motors be used at high temperatures?
There is no need for a heated discussion about it as maxon’s motor expert Andrew Gibson offers a view on the subject