Kistler Instruments is adding three new measuring ranges to its KiTorq torque measuring system. The new ranges of 100, 200, and 5000Nm have been added to the existing ranges of 500, 1000, 2000 or 3000Nm measuring ranges. All ranges are available with an accuracy class of 0.05 per cent of range. These additional ranges complete the portfolio for test benches for internal combustion engines, electric motors, transmissions and drive trains.
Rotors of different sizes can be combined with same ringless stator, which is easy to install and allows different items to be tested without the complete reconstruction of the test stand. The ringless stator design speeds up the installation, protects against damage during assembly operations and facilitates visual observation during the test process.
A single, intelligent stator can be used with any KiTorq rotor of the same speed rating and will automatically recognise the rotor measuring range. This minimises hardware investment, as one stator may be used with rotors of differing ranges for different applications. Installation is simplified by the contactless, digital telemetry that does not require an antenna ring. The lack of an antenna ring has not reduced the precision of the sensor, which has an excellent signal bandwidth of 10kHz and accuracy of better than 0.05 per cent. A speed measurement of 60 pulses per revolution is integrated in the standard system.
The stator is now available with Profibus, Profinet CANopen and Ethernet interfaces in addition to the analogue / frequency, USB and RS-232 interfaces which allow analogue and digital signal outputs to be fully scalable. When needed, the rotor's original measuring range may be overridden to allow the full output signal to be available over a defined range. A second, freely selectable measuring range may also be defined at each output.
The solid measuring flange is very robust and has been tested to EN 60068-2-27 for mechanical shock, EN 60068-2-6 for triaxial vibration loading and EN 61326-1 for interference immunity. The KiTorq system is supplied as standard with SensorTool configuration and diagnostic software and calibration certificates. Several calibration options are available for the configurable output signals of the KiTorq system and when replacing an individual rotor or stator, the notional calibration values can be calculated to avoid the need to have the unit recalibrated by the manufacturer.
Kistler's KiTorq measuring flange is suitable for use in test rigs for electric motors, internal combustion engines, transmissions, pumps and compressors. For further details, please visit the website at www.kistler.co.uk.