See Micro-Epsilon at MachineBuilding.Live, 4 October 2023, on stand 21
The rear-tail option with cable integrated on the rear of the sensor allows even more space-saving installation. The length of the integrated cable is 30cm. This version eliminates the need for upward wiring, which means around 80mm less installation height is required. Compared to the standard sensor model, almost 50% of the installation space can be saved.
The new protective housing option makes the sensors even more robust in harsh industrial environments. The housing is available for sensors in the 25x0 and 29x0 series with measuring ranges of 25, 50 and 100mm, as well as sensors in the 30x0 and 30x2 series with measuring ranges of 25 to 200mm.
The protective housing offers connections for air flushing and liquid cooling, an adjustable splash guard, a replaceable protective glass and a free-blowing device. If the built-in free blowing device is supplied with compressed air, dirt, dust and other contaminants can be removed directly, which extends cleaning intervals. The protective housing with additional water cooling offers protection against mechanical damage as well as protection against high ambient temperatures. Alternatively, it is also possible to heat the sensor at particularly low outside temperatures. If the protective screen is damaged, it can be replaced easily and cost-effectively.
Micro-Epsilon says the scanCONTROL 30xx sensor is among the highest performing laser scanners in terms of its size, accuracy and measuring rate. The sensor has a compact housing with integrated controller, allowing fast integration into confined spaces. Available with either red or blue laser technology, the sensor provides calibrated 2D profile data with up to 5.5 million points per second.
A maximum profile frequency of 10kHz and innovative exposure control enable precise profile measurements in high speed, dynamic processes. A high resolution sensor matrix offers a resolution of 2,048 points per profile with an ultimate point distance spacing of just 12µm, allowing measurements of extremely fine surface/geometrical details.