binder's new S-coded and T-coded power connectors are stated to be well suited for power transmission applications. The two standardized types are designed as per DIN EN 610276-2-111 for uses with motors and drives and also for supplying power to AC and DC consumers. The S-coded connectors of binder's 814 Series were developed for use in AC supplies up to 630V AC. They have a PE lead and can transmit, in the two-phase or three-phase version, power of up to 7.5kW. The power connectors of the 814 Series are said to be good for applications such as AC motors and drives, motor load switches and frequency converters.
The T-coded connectors of binder's 813 Series are intended for DC voltages up to 63V DC at 12A. They are, says binder, suited for use as power connectors for fieldbus or Ethernet applications such as Profinet. These power connectors can also be used to supply DC motors and drives or other power-hungry components with up to 750W. The Series 813 connectors have four gold-plated contacts while the Series 814 plugs have two and three gold-plated contacts and one pre-mating PE contact. They are available in both straight and right-angle versions.
The cable connectors of both types come with the M12 interlock as standard, with protection to IP67 and IP68 and are designed for more than 100 mating cycles. The operating temperature range is -25 °C to +85 °C. binder says that both series offer moulded male cable connectors and female cable jacks, either premade or ready for assembly, and that for panel mounting, round and square housings made of metal and plastic are available. These can be screw-mounted from the front or back. The products can be connected by the customer and are also available with pre-connected stranded wire.
For more information about the new S-coded and T-coded power connectors please visit www.binderuk.com.