Machinery Directive Harmonised Standards list, 15 January 2016

+++ STOP PRESS See also Machinery Directive Harmonised Standards, 13 May 2016 +++

The information below has been extracted with care from the official list, but it remains the reader's responsibility to check the OJ list via the link above, and also to check the Machinery Directive page on the European Commission website for any newer lists.

New and updated harmonised standards and amendments published in the list for the first time are as below.

Standards developed by CEN

Changes to A-Type standards harmonised to the Machinery Directive

There are no new or amended A-Type standards. However, the following was listed in the OJ on 13 February 2015 as a new C-Type standard, but in the latest list it has been moved to the section for A-Type standards:

• EN 1127-2:2014, Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining

Changes to B-Type standards harmonised to the Machinery Directive

There are no new or amended B-Type standards.

Changes to C-Type standards harmonised to the Machinery Directive

• EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests, which supersedes EN 280:2013 on 28 February 2017
• EN 415-1:2014 Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment, which supersedes EN 415-1:2000+A1:2009 on 29 February 2016
• EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene requirements , which supersedes EN 453:2000+A1:2009 on 29 February 2016
• EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene requirements, which supersedes EN 454:2000+A1:2009 on 29 February 2016
• EN 536:2015 Road construction machines - Mixing plants for road construction materials - Safety requirements
• EN 1417:2014 Plastics and rubber machines - Two-roll mills - Safety requirements , which supersedes EN 1417:1996+A1:2008 on 31 December 2016
• EN 1459-2:2015 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
• EN 1501-1:2011+A1:2015 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles, 1st amendment, which supersedes the previously unamended standard on 19 February 2016
• EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements, which supersedes EN 1674:2000+A1:2009 on 31 March 2016
• EN ISO 3691-1:2015 Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013), which supersedes EN ISO 3691-1:2012 on 31 January 2016
• EN ISO 7199:2014 Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO 7199:2009+Amd 1:2012)
• EN ISO 9902-1:2001/A2:2014 Textile machinery - Noise test code - Part 1: Common requirements, 2nd amendment (ISO 9902-1:2001), which supersedes the previously amended standard on 29 February 2016
• EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene requirements, which supersedes EN 12041:2000+A1:2009 on 29 February 2016
• EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene requirements , which supersedes EN 12043:2000+A1:2010 on 29 February 2016
• EN 12268:2014 Food processing machinery - Band saw machines - Safety and hygiene requirements, which supersedes EN 12268:2003+A1:2010 on 29 February 2016
• EN 12547:2014 Centrifuges - Common safety requirements, which supersedes EN 12547:1999+A1:2009 on 29 February 2016
• EN 12882:2015 Conveyor belts for general purpose use - Electrical and flammability safety requirements , which supersedes EN 12882:2008 on 29 February 2016
• EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements, which supersedes EN 13001-1:2004+A1:2009 on 29 February 2016
• EN 13001-2:2014 Crane safety - General design - Part 2: Load actions, which supersedes EN 13001-2:2011 on 29 February 2016
• EN 13001-3-2:2014 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
• EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
• EN 13561:2015 External blinds and awnings - Performance requirements including safety, which supersedes EN 13561:2004+A1:2008 on 28 February 2017
• EN 13659:2015 Shutters and external venetian blinds - Performance requirements including safety, which supersedes EN 13659:2004+A1:2008 on 28 February 2017
• EN 13870:2015 Food processing machinery - Portion cutting machines - Safety and hygiene requirements, which supersedes EN 13870:2005+A1:2010 on 31 March 2016
• EN 13871:2014 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements, which supersedes EN 13871:2005+A1:2010 on 29 February 2016
• EN 15059:2009+A1:2015 Snow grooming equipment - Safety requirements , which supersedes EN 15059:2009 on 29 February 2016
• EN 15572:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines
• EN 15811:2014 Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 (modified)), which supersedes EN 15811:2009 on 29 February 2016
• EN ISO 16119-4:2014 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)
• EN 16230-1:2013+A1:2014 Leisure karts - Part 1: Safety requirements and test methods for karts, which supersedes EN 16230-1:2013 on 29 February 2016
• EN ISO 16230-1:2015 Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
• EN ISO 16231-2:2015 Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)
• EN 16307-1:2013+A1:2015 Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks, which supersedes EN 16307-1:2013 on 29 February 2016
• EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
• EN 16486:2014 Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
• EN 16500:2014 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
• EN ISO 18217:2015 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015), which supersedes EN 1218-4:2004+A2:2009 on 31 March 2016
• EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015), which supersedes EN ISO 23125:2010 on 29 February 2016
• EN ISO 28927-5:2009/A1:2015 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009), 1st amendment

Standards developed by CENELEC

These two are not categorised as A-type, B-type or C-type standards in the list of Harmonised standards:

• EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements (IEC 60519-1:2015)
• EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements (IEC 62841-1:2014 (Modified)), which supersedes EN 60745-1:2009+A11:2010, EN 61029-1:2009+A11:2010 and EN 60335-1:2012+A11:2014 on 22 February 2018

Changes to A-Type standards harmonised to the Machinery Directive

There are no new or amended A-Type standards.

Changes to B-Type standards harmonised to the Machinery Directive

• EN 62061:2005/A2:2015 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems, 2nd amendment (IEC 62061:2005/A2:2015), which supersedes the previously amended standard on 31 July 2018 [NB despite this date being given in the OJ, it is also stated that the A1 amendment expired on 18 December 2015]

Changes to C-Type standards harmonised to the Machinery Directive

• EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material - Safety requirements, which supersedes EN 50223:2010 on 13 April 2018
• EN 50636-2-107:2015 Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 (Modified))
• EN 60335-1:2012/A11:2014 Household and similar electrical appliances - Safety - Part 1: General requirements (IEC 60335-1:2010 modified), which supersedes the previously amended standard on 29 February 2016
• EN 60335-2-23:2003 Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care (IEC 60335-2-23:2003)
• EN 60335-2-23:2003/A2:2015 Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care, 2nd amendment, (IEC 60335-2-23:2003/A2:2012 (Modified)), which supersedes the unamended standard on 29 September 2017
• EN 60335-2-95:2015 Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use (IEC 60335-2-95:2011 (Modified))
• EN 60335-2-95:2015/A1:2015 Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use, 1st amendment (IEC 60335-2-95:2011/A1:2015), which supersedes the unamended standard on 15 June 2018
• EN 60335-2-97:2006 Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97:2002 (Modified) + A1:2004 (Modified))
• EN 60335-2-97:2006/A12:2015 Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment, 12th amendment), which supersedes the previously amended standard on 29 September 2017
• EN 60335-2-103:2015 Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2006 (Modified) + A1:2010 (Modified))
• EN 60745-2-3:2011/A12:2014 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006 (Modified) + A1:2010 (Modified)), which supersedes the previously amended standard on 17 November 2017
• EN 61029-2-4:2011 Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993 (Modified) + A1:2001 (Modified))
• EN 61029-2-5:2011 Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 (Modified) + A1:2001 (Modified))
• EN 61029-2-5:2011/A11:2015 Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws, 11th amendment (IEC 61029-2-5:1993 (modified) + A1:2001 (modified)), which supersedes the previously amended standard on 1 December 2016
• EN 62841-2-2:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014 (modified)), which supersedes EN 60745-2-2:2010 on 21 August 2018
• EN 62841-2-4:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014 (modified)), which supersedes EN 60745-2-4:2009 + A11:2011 on 21 August 2018
• EN 62841-2-5:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014 (modified)), which supersedes EN 60745-2-5:2010 on 21 August 2018
• EN 62841-2-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders (IEC 62841-2-9:2015 (Modified)), which supersedes EN 60745-2-9:2009 on 21 August 2019
• EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014 (modified)), which supersedes EN 61029-2-1:2012 on 21 August 2019
• EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for diamond drills with liquid system (IEC 62841-3-6:2014 (modified))

Corrigendum 4 March 2016

A corrigendum was published on 4 March 2016, relating to EN 62841-1:2015 and the date of cessation of the presumption of conformity of the superseded standards. Originally this was stated as being 22 February 2016 but the corrigendum corrected this to 22 February 2018. The list above has been amended accordingly.

Previous changes to Machinery Directive Harmonised Standards

Since 2011 MachineBuilding.net has analysed each new list of Machinery Directive Harmonised Standards published in the Official Journal of the European Union (OJ) and summarised the additions and changes. These previous analyses of the Harmonised Standards can be seen by following this link:

• Machinery Directive Harmonised Standards - change log

Future changes to Machinery Directive Harmonised Standards

To keep up to date with further developments in Harmonised Standards for the Machinery Directive 2006/42/EC, subscribe to our free email newsletter. You may also like to request a copy of the FREE MachineBuilding.net Guide to the New Machinery Directive 2006/42/EC.