Managing a blooming nuisance when bonding

Cyanoacrylates (CAs) are easy to use, single-part adhesives. They cure quickly at room temperature, offer good throughput and are suitable for bonding a range of substrates. In this article, Peter Swanson, Managing Director of adhesives specialist Intertronics, shares his experience and offers tips on how to manage and prevent blooming in your CA process

If you have ever used a cyanoacrylate adhesive (often known as “instant adhesive” or “superglue”), you may have seen blooming — a chalky, white residue on the surface of your part. Importantly, blooming does not affect bond integrity, but it is undesirable if aesthetics are important or if the presence of blooming might imply a quality problem to your customer — for example, when making medical devices or factory  instrumentation.

CAs cure very rapidly, achieving fixture strength in seconds and full cure in up to 24 hours. The chemistry is quite volatile, and blooming is a side effect of this. The energy from the cure chemical reaction can promote the release of unreacted cyanoacrylate monomers into the air, which condense and fall back onto surface in the form of white crystals or flakes. The resulting by-product, most noticeable around the periphery of the bondline, is known as blooming, frosting or blushing.

Low odour, low bloom cyanoacrylate adhesives

Several cyanoacrylate monomers are used to formulate CAs. Ethyl (ECA) monomers are the most common, but their volatility means they also more prone to both blooming and a harsh odour, which may be irritating and require local ventilation during use.

Cyanoacrylate adhesives based on methoxyethyl (MECA) monomers are often marketed as “low odour, low bloom” formulations. However, they can compare poorly in terms of cure speed, strength and cost, and so their use involves compromises.

The recent launch of our own  Born2Bond Ultra CAs offers another option as it combines the fast cure associated with ECA-based CAs with the low blooming characteristics of MECA-based CAs. Their inherently low volatility means less odour, and they are less irritating.

Process

Another way of reducing blooming is to minimise the size of adhesive fillets. Excess adhesive squeezed out into fillets around the bondline will cure more slowly and will provide exposed surfaces from which blooming can occur. Where joint size or configuration means that fillets are inescapable, a low bloom, fast cure formulation allows manufacturers a wider dispensing tolerance.

Cure Speed

In general terms, slowing down the cure will allow more time for volatile monomers to be released. On the other hand, making the cure faster will generate a higher exotherm (heat energy) in the adhesive, encouraging the release of volatiles. Controlling the speed of cure is one potential way of minimising blooming.

If exposed fillets are unavoidable, accelerating cure should restrict blooming. One method is to use an activator, but application might need to be carefully controlled, as there is a risk that this chemical reaction is too fast, creating an exotherm and leading to blooming. Another, possibly more elegant, approach is to use a light cure cyanoacrylate adhesive, like Born2Bond Light Lock. Any interfacial adhesive is cured by the normal cyanoacrylate mechanism, but exposed fillets are cured tack-free by exposure to low intensity UV light. The light cure of only a few seconds eliminates the possibility of blooming because the volatiles never have a chance to become mobile.

Cyanoacrylate adhesives will become slower with age, and so more prone to blooming. Practice good stock control and housekeeping to preclude the use of materials which are out of shelf life.

Environmental Factors

Simple local ventilation and increased airflow will help to blow the volatilised monomers away from the parts before they can settle on the surface. Blooming will also occur if the bonded parts are placed too quickly into a sealed environment such as a bag or shipping container, where any volatility is trapped with the parts.

Higher ambient temperatures encourage the volatility of the CA monomers, leading to a higher likelihood of blooming. Conversely, lower temperatures slow the reaction mechanism, causing prolonged cure time and opportunity for volatiles to be released into the air.

Because CAs usually cure by a reaction with surface moisture, relative humidity (RH) can be important. Best practice would suggest keeping the relative humidity to 40% - 60% and the temperature at around 21⁰C; consistency of environmental conditions will inform consistency of process times and outcomes.

Substrates

Acidic surfaces like wood or leather will cause cyanoacrylate adhesives to cure more slowly, increasing the risk of blooming. In these cases, it is recommended that a “surface insensitive” CA is used. Alternatively, Born2Bond Ultra offers a fixture time on leather of 5-10 seconds, with a low odour, low bloom formulation.

Conclusion

If cyanoacrylate adhesive blooming is an issue, consider changing to one of the latest innovative technologies, which can alleviate the problem without conceding adhesive performance. Dispensing and environmental control are also important to help get consistent results.

For more information about Born2Bond adhesives and how they can benefit your process click here

If blooming is a nuisance then a chat with Intertronics could bring things together more clearly
If blooming is a nuisance then a chat with Intertronics could bring things together more clearly
Intertronics can help machine builders obtain clarity in bonding
Intertronics can help machine builders obtain clarity in bonding

Intertronics

Station Field Industrial Estate
Banbury Road
Kidlington
OX5 1JD
UNITED KINGDOM

+44 (0)1865 842842

info@intertronics.co.uk

www.intertronics.co.uk

More from Intertronics

New Intertronics metering, mixing and dispensing system

Posted 5 hours ago

Productivity through process improvement

Posted 3 months ago

Considerations when choosing a dispensing robot

Posted 5 months ago

Patented cyanoacrylate adhesives reduce manufacturing trade-offs

Posted 7 months ago

Fisnar cartridge dispenser improves handheld dispensing

Posted 2 years ago

WACKER gel: waterproof, shock-absorbing encapsulant

Posted 2 years ago

Tidy workplace and precise dispensing from preeflow eco-PEN450

Posted 2 years ago

Tin-free silicone avoids conflicting chemistries

Posted 2 years ago

Precision dispensing system improves quality and reduces rejects

Posted 2 years ago

Free guide: How to specify a dispensing robot

Posted 2 years ago

Automated sealant dispensing proves a winner for golfing product

Posted 2 years ago

Affordable mixing machine for liquids, pastes and powders

Posted 2 years ago

New eco-PEN330 dispenser from Intertronics

Posted 2 years ago

Precision liquid dispensing: fast, accurate jetting valves

Posted 3 years ago

Automation-ready plasma surface treatment from Intertronics

Posted 3 years ago

Solving the productivity puzzle with technology and training

Posted 3 years ago

Mixing and sub-micron degassing in 20 litre quantities

Posted 3 years ago

The Relyon Plasma Piezobrush PZ2 for surface activation

Posted 3 years ago

New nanoparticle deagglomeration technology

Posted 3 years ago

Versatile industrial epoxy adhesives available next day

Posted 3 years ago

Radiometer from Intertronics aids process control in UV curing

Posted 3 years ago

Fast cure, easy removal temporary PCB mask aids productivity

Posted 4 years ago

Precision mixing and dispensing facilitates miniaturisation

Posted 4 years ago

Mixing silicones for facial and other prosthetics

Posted 4 years ago

New QuantX premium dispensing components range from Intertronics

Posted 4 years ago

Preeflow volumetric adhesive dispensing helps device integrity

Posted 4 years ago

Relyon Plasma PB3 Plasmabrush for surface treatment and cleaning

Posted 4 years ago

New Polytec PT brochure from Intertronics

Posted 4 years ago

Dymax BlueWave MX-150 high energy UV LED spot curing lamp

Posted 4 years ago

Black opaque conformal coating enhances PCB security

Posted 4 years ago

Accuracy and repeatability in precision dispensing with preeflow

Posted 4 years ago

Thinky ARE-400 Twin: twice the capacity, same mixing performance

Posted 4 years ago

Intertronics opens new Technology Centre

Posted 4 years ago

Relyon Plasma Treatment Systems available from Intertronics

Posted 4 years ago

Intertronics brings UV post-cure to 3D SLA polymer printing

Posted 4 years ago

UV/light cure masking resin: protection for turbine components

Posted 4 years ago

Clear epoxy potting compound offers high temperature resistance

Posted 4 years ago

High-performance methyl methacrylate adhesives from Intertronics

Posted 4 years ago

Adhesive Technology Seminars: performance and productivity

Posted 4 years ago

High-precision volumetric spray dispensing system

Posted 5 years ago

L&L A-K015: a fast-curing clear adhesive for plastics and metals

Posted 5 years ago

New introductory guide for time/pressure dispensing

Posted 5 years ago

Download guides: electrically and thermally conductive adhesives

Posted 5 years ago

Fast-curing adhesive bonds polypropylene and polyethylene

Posted 5 years ago

Positive displacement dispensing valve has disposable fluid path

Posted 5 years ago

Light cure conformal coatings: a technical guide

Posted 5 years ago

New Hi Vis maskant from Intertronics speeds finishing processes

Posted 5 years ago

Choosing a Structural Adhesive: technical seminar at FAST

Posted 5 years ago

High-performance UV LED cure system is versatile and easy to use

Posted 5 years ago

Intertronics UV adhesive system cures time problem

Posted 5 years ago

Improve efficiency of FIP gaskets with DYMAX UV cure material

Posted 5 years ago

Fisnar DC100 programmable precision dispenser

Posted 5 years ago

Workshop seminar on adhesive & coating dispensing at FAST

Posted 5 years ago

Electrically conductive flexible polyurethane adhesive

Posted 5 years ago

Intertronics IRS 2129 rubber modified epoxy adhesive

Posted 5 years ago

Opti-tec 7020 silicone potting protection with total clarity

Posted 6 years ago

ADH 9454: high-viscosity gel, gap-filling cyanoacrylate gel

Posted 6 years ago

DYMAX 3401 UV and moisture cure adhesive for plastics and metals

Posted 6 years ago

New whitepaper: designing-in light-curing adhesives

Posted 6 years ago

More precise two-component metering, mixing and dispensing

Posted 6 years ago

DYMAX Industrial Adhesives Selector Guide now available

Posted 6 years ago

DYMAX UV/light adhesive used in museum-quality display table

Posted 6 years ago

New Practical Components Catalogue from Intertronics

Posted 6 years ago

New PCB coating pen from Intertronics

Posted 6 years ago

CircuitWorks flux-dispensing pens/syringes and flux-removal pens

Posted 6 years ago

Flowplus16 pressure monitor features universal Luer-Lock system

Posted 6 years ago

CircuitWorks silver and nickel conductive pens from Intertronics

Posted 6 years ago

UV cure optical display adhesives offer crystal clear bonds

Posted 6 years ago

DYMAX UV and visible spot cure system upgrade

Posted 6 years ago

Phoseon Firefly high-performance UV LED System from Intertronics

Posted 7 years ago

DYMAX UV cure FIP/CIP gasket for fuel cells from Intertronics

Posted 7 years ago

Advanced dual-cure conformal coating from Intertronics

Posted 7 years ago

Thinky mixer provides rapid one-step dispersal/degassing

Posted 7 years ago

flowplus16 Pressure Sensor for critical dosing and dispensing

Posted 7 years ago

UV cure modular flood lamp systems from Intertronics

Posted 7 years ago

New UV/light and rapid moisture cure encapsulants

Posted 7 years ago

Two new LED encapsulants from Intertronics

Posted 7 years ago

Resilient potting compound for Tough Tracker from Intertronics

Posted 7 years ago

Polytec PU 1000: electrically conductive polyurethane adhesive

Posted 7 years ago

UV & LED curing adhesive bonds glass/glass and glass/metal

Posted 7 years ago

Microcapsules in adhesive dispensing technology

Posted 8 years ago

High-performance thermally conductive epoxy adhesives

Posted 8 years ago

Electrically conductive adhesive is biocompatible Class VI

Posted 8 years ago

New blue to pink peelable masking resin: simple and versatile

Posted 8 years ago

Entry level UV curing flood lamp for adhesives/coatings/inks

Posted 8 years ago

High-performance fluid dispensing system from Intertronics

Posted 8 years ago

Competitiveness is increased with F4200N dispensing robot

Posted 8 years ago

New adhesive bonds dissimilar materials in seconds

Posted 8 years ago

Specialist precision dispensing technology webinar

Posted 8 years ago

Two-component dispensing more precise with Intertronics

Posted 8 years ago

More technical articles
4 hours ago
Switching up a gear
Phoenix Contact is expanding its line of unmanaged switches
6 hours ago
Freshly updated online cabinet and access panel locking resource
The EMKA website now features updated guidance on new locking solutions for switch and control cabinets
1 day ago
igus robots on BBC TV
Earlier this week the BBC's One Show highlighted the Small Robot Company, featuring delta robots from igus
1 day ago
Why use a fieldbus? New video explains key benefits
This video, published by the PROFIBUS Group, explains a dramatic evolution in industrial automation: the transition from 4-20 mA to digital fieldbuses. It compares the two and highlights key benefits and new business models arising from the implementation of fieldbuses
1 day ago
One way hinges: the discreet way to hang machine doors
Wixroyd has a product in its portfolio that offers machine builders an interesting way to hang access panels and doors
1 day ago
Henkel Loctite highlights advantages of threadlocker
There are various ways of securing threaded fasteners against vibration loosening in machines, and Henkel Loctite is highlighting this one
2 days ago
Post BREXIT notes for machine builders
Hold-Tech Files has just published a review of the post-BREXIT picture for machine builders, featuring answers to questions that will undoubtedly be common to many of us at the moment
2 days ago
New all-in-one industrial PCs
With its newly introduced all-in-one (AIO) solutions, Phoenix Contact now offers industrial PCs with a completely closed die-cast aluminum housing (IP65)
2 days ago
Modular safety relay claimed to be world first
Pilz says that its all-new myPNOZ is the world’s first batch size 1 safety relay
3 days ago
Edge computing hardware and software choices for machine builders
RDS and AAEON offer machine builders an even greater choice of hardware and software to build high performance, integrated solutions for smart applications that require vision data to be processed at the edge