Maxim MAX11216 24-Bit ADC with PGA only at Mouser

Mouser Electronics is first to stock the MAX11216 Analog to Digital Converter from Maxim Integrated. The MAX11216 is a single-channel 24"‘bit Delta Sigma Analog-to-Digital Converter (ADC) with a low noise Programmable Gain Amplifier (PGA). At 64 kilo-samples per second (ksps) it is designed for precision measurements of AC and DC signals. It is designed to provide a wide dynamic range for flexible high performance architectures.

The Maxim Integrated MAX11216 Analog to Digital Converter is a single-channel ADC that supports both differential and single-ended inputs. The MAX11216 has an integrated programmable gain amplifier that provides gain settings in six steps between 1× to 128×. Optional buffers provide isolation of input signal from the internal switched capacitor sampling network, allowing easy interfacing to high-impedance sources without compromising available dynamic range. The ADC provides excellent signal-to-noise ratio while dissipating very little power. Sample rates of up to 64ksps allow both precision DC and AC signal measurements for instrumentation applications. The MAX11216 can operate from either a single 2.7V to 3.6V analogue supply, or split +/-1.8V analogue supplies, allowing the analogue input to be sampled below ground.

Maxim's MAX11216 communicates digital data over an SPI interface that also supports QSPI and Microwire. The digital output of this serial interface, DOUT, has a programmable driver output which saves board space by reducing external components. Many features of the MAX11216 are read or set by this serial interface, including DOUT output driver strength, power down modes, reset status, and power up status, as well as the conversion result.

Target applications for the MAX11216 include integration into sensor nodes, medical equipment, and data acquisition equipment. Follow the link to learn more about the MAX11216 Analog to Digital Converter.

Mouser Electronics

Artisan Building, Suite C, First Floor
Hillbottom Road
High Wycombe
HP12 4HJ
UNITED KINGDOM

+ 44 (0)1494 467490

uk@mouser.com

www.mouser.com

More products
19 hours ago
NSK roller guides increase uptime of blow moulding machines
A manufacturer of PET (polyethylene terephthalate) bottles frequently had to replace the linear guides on its blow moulding machines. However, after switching to NSK’s RA series roller guides, there have been no failures for over a year, producing annual cost savings in maintenance, spare parts and downtime of €60,000.
21 hours ago
Design your future at Design Engineering Expo 2022
With innovation at its core, Design Engineering Expo 2022 is the perfect place for forward thinking design engineering professionals to gain insight into new technologies, learn how to improve efficiencies and gain inspiration for ideas they can implement into their workplace, to put them ahead of their competitors and form part of their future strategy.
23 hours ago
Tray handling system gently handles medical-use glass cartridges
Gerresheimer Medical Systems Division produces over one billion high quality, medical grade, glass cartridges every year and central to its new post-production inspection and packaging system is the IEF Werner varioSTACK CF (Clean Factory) tray palletiser.
1 day ago
WDS reinforces stock availability with production machine upgrade
WDS Components has strengthened its stock availability of standard parts and components by upgrading its on-site production machinery.
2 days ago
Bostik present details of new 2K cyanoacrylate prototype
Bostik’s Born2Bond R&D team has released details of a new cyanoacrylate-based adhesive prototype at the ‘in-adhesives’ event, proving how products are being developed for a near-future that will see instant adhesives used for long-term critical applications.
5 days ago
Virtual factory and showroom tours provide access to best practices
Mitsubishi Electric is opening up access to its factory automation sites and showrooms through virtual tours with the aim of overcoming the restrictions on in-person visits caused by the pandemic.
5 days ago
Food-safe, tribo-optimised coating increases packaging throughput
A packaging and processing machinery builder has reduced drag, improved rigidity, increased throughput and raised hygiene standards on one machine family by applying an iglidur IC-05 tribo-coating on a mitre bar application.
5 days ago
Unlocking the benefits of micromotors at Design Engineering Expo
Small DC motor supplier EMS will be exhibiting the Faulhaber BXT-SC series and the AM3248 stepper motor at this year’s Design Engineering Expo, taking place at the NEC in Birmingham on June 8 to 9, 2022.
6 days ago
Advanced Engineering partners with SMMT and ADS
At this year’s Advanced Engineering UK, held at the NEC, Birmingham on 2-3 November, automotive and aerospace businesses will have the opportunity to meet with buyers from the sectors’ leading OEMs.
6 days ago
Telford based supplier has a handle on Truckman Tops
One of the UK’s best-known brands in the automotive aftermarket industry is Truckman, and the company’s new Truckman Classic hardtop for the Isuzu D-Max now features Vector T3 locking handles supplied by Industrilas.

Login / Sign up