Metal vs. plastic: specification of large outdoor enclosures

Large, outdoor enclosures are a necessary aspect of the general infrastructure of day-to-day life. Used to house vital control panels and electrical connections, these enclosures must be able to withstand all that is thrown at them to protect their contents; this includes extreme temperatures, rain, UV exposure and even vandalism attempts. Due to its inherent strength, steel has traditionally been the material of choice despite several shortcomings; but can glass-reinforced polyester (GRP) offer a robust alternative which offers protection where steel cannot?

On the face of it steel or stainless steel is the perfect material for outdoor enclosures. It is quite malleable, making pressed steel designs easy to manufacture and it is very tough with high impact resistance. In fact, the majority of industries and applications can be varied and include trackside, wastewater treatment, telecoms and traffic control have traditionally opted for metal enclosures for this very reason.

However, there are many downsides to specifying metal enclosures. The weight of the material means that in most cases a mechanical lifting aid is required to help position the enclosure during installation, which can be problematic in applications with limited access. Installation itself can also prove time consuming as the enclosure has to be earthed to meet insulation guidelines to prevent serious injury in the event of an electrical fault.

It's not just during installation that problems can occur. Once installed, the enclosure has to withstand many years of abuse from inclement weather as well as the local surroundings. While metal is very robust, it is still prone to denting in the event of a heavy knock. Once dented, corrosion can begin to occur, which will affect the overall integrity of the enclosure; in fact, a single scratch to the surface can be enough to compromise its corrosion resistance.

Due to the scrap value of steel, metal enclosures are also frequently the victim of vandalism, suffering damage which can put the enclosed electrics at risk, or even require complete replacement. Even petty vandalism, such as graffiti, can ruin the aesthetics of the enclosure, and is impossible to clean off without removing the protective paint layer.

Quick and cheap delivery and installation

With all of these issues to contend with it's little wonder that electrical installers are looking for new alternatives. For many, Glass Reinforced Polyester (GRP) is the solution. It offers similar levels of impact resistance to steel and boasts the same non-corrosive attributes of stainless steel at a fraction of the cost. In many other areas it even exceeds the performance of metal enclosures. For example it is typically one-third the weight of similar sized metal enclosures, making delivery and installation far quicker and cheaper.

GRP is non-conductive and so it does not require earthing, which makes installation easier; it even lends itself to Network Rail applications which require Class II installation. It is also completely resistant to corrosion, even after hard impacts and surface scratches, meaning that it is capable of providing long-term, reliable protection. In addition, it is of less interest to vandals and thieves as there is no scrap value to the material.

Despite these benefits there are still many within the industry that feel that metal enclosures are the premium choice. They point out that GRP can be susceptible to blooming - discolouring over prolonged exposure to UV - which could be a sign that it is susceptible to UV exposure. Fortunately, this is an issue which can be solved through advanced manufacturing techniques available to premium GRP products.

Spelsberg offers a premium series of GRP enclosures that includes as standard "˜Bloomguard'. "˜Bloomguard' is a new development within the raw material that enables the outdoor GRP enclosure to be completely resistant to glass fibre blooming and surface erosion. It is resistant to scratching so cannot be removed, and actually makes the enclosure surface smoother, which makes cleaning graffiti and stickers far easier.

Metal enclosures undoubtedly do offer a high level of impact resistance, and in the past they were the best option for maximum protection outside. However, with new advances in design and manufacturing techniques, GRP enclosures are able to offer the same degree of protection without the inherent drawback which the industry has come to accept from steel.

GRP offers a cheaper approach in terms of specification, installation and on-going maintenance while also offering high impact resistance, UV protection and complete electrical insulation.

To learn more about GRP enclosures from Spelsberg Els, please visit www.spelsberg.co.uk.

Spelsberg Els UK Ltd

Unit 1B Queensway Business Park
Hadley Park West
TELFORD
TF1 6AL
UNITED KINGDOM

+44 (0)1952 605849

sales@spelsberg.co.uk

www.spelsberg.co.uk

More from Spelsberg Els UK Ltd

On the charge!

Posted 6 days ago

Switching into LV switchgear enclosure mode

Posted 1 week ago

Fast prototypes for industrial enclosures

Posted 2 weeks ago

The path to faster development of industrial enclosures

Posted 1 month ago

New configurator has it figured out

Posted 2 months ago

Protection reaches a critical junction

Posted 3 months ago

EVs – a highly charged topic

Posted 4 months ago

Industrial enclosures – more than just the box

Posted 4 months ago

Developments in charging technology

Posted 6 months ago

Mini size junction boxes now available

Posted 6 months ago

New fire-resistant enclosure maintains electrical system safety

Posted 8 months ago

Enclosure customisation is key for fire safety control unit

Posted 8 months ago

Enclosures for outdoor electrical installations

Posted 11 months ago

Hand sanitiser dispenser manufacturer demands rugged enclosures

Posted 1 year ago

Customised enclosures for extreme and challenging environments

Posted 1 year ago

Spelsberg UK working hard to maintain UK stocks

Posted 1 year ago

Take a virtual tour of Spelsberg's electrical enclosures

Posted 1 year ago

Spelsberg GRP enclosure installed in UK's deepest mine

Posted 1 year ago

Movie of the month

Posted 1 year ago

Quick delivery on printing and labelling of enclosures

Posted 1 year ago

How to specify enclosures for environmental management systems

Posted 1 year ago

Spelsberg helps UK machine builders to beat Brexit uncertainty

Posted 1 year ago

Fast turnaround on customised enclosures

Posted 1 year ago

GEOS enclosures are suitably rugged for coastal applications

Posted 1 year ago

Extensive stocks of Spelsberg enclosures held in the UK

Posted 2 years ago

Overnight customised enclosures thanks to in-house machining

Posted 2 years ago

Video shows the extreme tests endured by Spelsberg enclosures

Posted 2 years ago

Praise for Spelsberg UK's Pro-Active technical telesales service

Posted 2 years ago

Spelsberg customised enclosures feature in educational rig

Posted 2 years ago

Movie of the month

Posted 2 years ago

Spelsberg enclosures speed fast-food kitchen fit-outs

Posted 2 years ago

GEOS enclosures provide protection in aggressive environments

Posted 2 years ago

Enclosures ensures lift passengers can make emergency calls

Posted 2 years ago

Drives and Controls celebrate 18 years of Spelsberg distribution

Posted 3 years ago

Spelsberg and CED offer top-class junction boxes to wholesalers

Posted 3 years ago

Spelsberg UK turns 20: learning from the past, moving forward

Posted 3 years ago

Combating condensation in enclosure installations

Posted 3 years ago

Spelsberg aids efficiency in offsite heat exchange builds

Posted 3 years ago

Where to position electrical enclosures

Posted 3 years ago

John Clarke is new Spelsberg Area Sales Manager for West region

Posted 3 years ago

Free expert advice from enclosureanswers.com

Posted 3 years ago

Distribution board helps keep divers' pressure stable

Posted 3 years ago

Next-day custom enclosure samples keep projects on schedule

Posted 3 years ago

Spelsberg custom enclosures in dairy farming applications

Posted 4 years ago

Tough enclosures bring safety and endurance to road tankers

Posted 4 years ago

Spelsberg shows its true colours for superior customer service

Posted 4 years ago

Spelsberg appoints Chris Smith as South West Area Sales Manager

Posted 4 years ago

Ultraviolet considerations when specifying an enclosure

Posted 4 years ago

Spelsberg fit and forget thermostat keeps frost and snow at bay

Posted 4 years ago

Bespoke cabling systems company grows with Spelsberg enclosures

Posted 4 years ago

Spelsberg aluminium enclosures expected to prove a hit

Posted 4 years ago

Spelsberg offers farmers world-class electrical enclosures

Posted 4 years ago

WAGO uses Spelsberg enclosures for new pre-mounted products

Posted 4 years ago

Spelsberg laboratory approved for in-house UL certification

Posted 4 years ago

Spelsberg offers upgrade to classic Abox design

Posted 4 years ago

Enclosures speed rewiring of automated manufacturing systems

Posted 4 years ago

GRP: the best of both worlds for trackside enclosures?

Posted 5 years ago

Commercial salad growers box clever with Spelsberg

Posted 5 years ago

Modular distribution enclosures improve "˜Smart Building'

Posted 5 years ago

Managing heat in electrical enclosures

Posted 5 years ago

Spelsberg slashes lead times on custom orders

Posted 5 years ago

Customised standard enclosures are quick and cost-effective

Posted 5 years ago

Spelsberg UK plans for growth in 2016 to support market demands

Posted 5 years ago

Spelsberg Pro-Active simplifies ordering for reduced lead times

Posted 5 years ago

Stealth enclosures for covert operations

Posted 5 years ago

Quickly find the right enclosure with new Spelsberg UK website

Posted 5 years ago

High-quality GRP heavy duty enclosures from Spelsberg

Posted 5 years ago

Spelsberg launches steel enclosure range

Posted 5 years ago

Ready-made enclosures for water treatment industry

Posted 5 years ago

1000+ bespoke enclosures moulded and assembled in 4 weeks

Posted 5 years ago

A-Z of electrical enclosures

Posted 6 years ago

Integrated ventilation with Spelsberg's AK Air enclosures

Posted 6 years ago

Trace heating thermostats keep water treatment plants running

Posted 6 years ago

Innovative electrical enclosures for new aircraft carriers

Posted 6 years ago

How to select the best material for an electrical enclosure

Posted 6 years ago

The questions to ask when specifying an electrical enclosure

Posted 6 years ago

Spelsberg expands current TK enclosure range

Posted 6 years ago

Rapid-Box: bespoke fire-resistant junction box

Posted 6 years ago

Specialised coatings improve enclosure performance

Posted 6 years ago

Spelsberg claims largest selection of non-metallic enclosures

Posted 7 years ago

Spelsberg WKE enclosures used for emergency systems

Posted 7 years ago

Bespoke moulding service speeds up repeat orders from Spelsberg

Posted 7 years ago

Customised enclosures help prevent freezing pipes

Posted 7 years ago

Service over supply from Spelsberg

Posted 7 years ago

Spelsberg appoints David Mills as Area Sales Manager for NW

Posted 7 years ago

Chris Lloyd confirmed as Spelsberg UK MD

Posted 7 years ago

Abox Magic GT gel provides IP68 ratings to 15 metres

Posted 7 years ago

How to select correct IP ratings for electrical enclosures

Posted 7 years ago

An introduction to electrical enclosure specification

Posted 7 years ago

Customised enclosures reduce costs and improve quality

Posted 7 years ago

Flexibility and reliability for airflow control unit enclosures

Posted 8 years ago

Spelsberg reduces lead times with new UK headquarters

Posted 8 years ago

Composite junction boxes for aircraft carrier lighting systems

Posted 8 years ago

Composite junction boxes used on RN aircraft carriers

Posted 8 years ago

Understanding ingress protection in electrical enclosures

Posted 8 years ago

Spelsberg will improve lead times on customised products

Posted 8 years ago

Non-metallic enclosures: the future for trackside installation

Posted 8 years ago

Revamped GTi range speeds up switchgear installation

Posted 8 years ago

Spelsberg UK sales team is strengthened with new appointments

Posted 8 years ago

Spelsberg launches its 'Space for you' campaign

Posted 8 years ago

New B-Box from Spelsberg offers quick, waterproof installation

Posted 8 years ago

Which is the best material for your application's enclosure?

Posted 9 years ago

Waterproof gel-filled enclosures are reusable

Posted 13 years ago

Non-metallic enclosures cope with harsh outdoor environments

Posted 13 years ago

Rugged Norma PC and ABS enclosures are sealed to IP65

Posted 13 years ago

IP66 enclosures selected for water shut-off valve controls

Posted 13 years ago

Custom junction box moulded in high-grade black plastic

Posted 13 years ago

Spelsberg products available through Farnell

Posted 14 years ago

Modular enclosures maintain IP65 protection

Posted 14 years ago

Rugged enclosures are suitable for fire engine applications

Posted 14 years ago

TK enclosures are tough enough for classrooms

Posted 14 years ago

More technical articles