Mitsubishi's M2M system opens up new world of communications

Machine-to-Machine (M2M) communications holds the key to a new paradigm of industrial automation and production. Jeremy Shinton, Product Manager - Business Solutions & Software for Mitsubishi Electric, explains how.

No matter what sector you operate in, requirements to develop new services, enhance productivity, boost efficiency and solve critical problems are common themes. Across manufacturing sectors, there is also the pressure to build better quality products and to be able to produce those products with greater flexibility, often with unprecedented levels of customisation.

Being able to do this is reliant on two vitally important things: huge quantities of data and the ability to analyse and act on the information that data provides.

In days gone by, the amount of data available was limited. Despite discussions on issues such as remote communications, enterprise connectivity, telemetry and more, the amount of data collected was limited and it tended to remain local. That also placed an emphasis on operators and technicians to be local in order to make operational decisions on the plant floor, and it meant that higher-level decisions about production were being made more on intuition than on actual requirements - if indeed, they were being made at all.

One of the first drivers for change was the rapid adoption of Ethernet for the backbone of industrial communications, opening up data transfer not just around the plant floor but also between the plant floor and higher-level business systems. Then came connectivity to the internet, enabling remote monitoring, diagnostics and even operation. At the same time, new generations of smart devices - sensors, actuators and others - began providing whole new levels of data about status, production efficiency, energy consumption, machine availability and more.

This alone has brought us a new model of integrated operations and flexible production, under the banner of "˜manufacturing convergence'. However, the final piece of the puzzle has revealed a much grander picture, and this has been driven from the consumer market: it is the GSM revolution.

High-speed, bi-directional transfer of data

If we could point to anything that really held back true industrial connectivity over previous decades, then it was surely the cost and difficulty of sending data over long distances. Telematics could only cope with small volumes of data, often only in one direction. Ethernet and internet connectivity revealed how large volumes of data, made available anywhere, could really help to enhance manufacturing operations and now GSM networks are delivering on the promise of high-speed, bi-directional transfer of large volumes of data between individual devices, with barely a consideration needed for range, on-time, power, cost or data limits and without any incurred expenditure on network infrastructure or installation.

This is the "˜Internet of Things' (IoT), or as it is alternatively referred to, Machine-to-Machine (M2M) communications. Individual devices capture an event and relay that data through a network (wired, wireless or hybrid) to an application (software program) that translates the captured data into meaningful information. It is a game changer in industrial applications, with bandwidth increasing in line with connection times and systems becoming ever more affordable. It is reckoned that the M2M era will see an estimated 50 billion GSM-connected devices by the end of the decade, driving a new model of connected intelligence. Experts predict that the ability to access, analyse and act upon the increased data that M2M systems will provide could deliver as much as $100 billion of annual savings thanks to improved material, energy, production and logistics efficiencies. Product quality and yields will improve, operational costs can be controlled more effectively and production can be optimised to best meet ever more demanding customer requirements.

Mitsubishi Electric is at the forefront of this revolution with its M2M platform, delivering affordable, global, end-to-end IP data connectivity in industry sectors such as environmental monitoring, SmartGrid, pipeline monitoring, machine monitoring, mining, water utilities, telecommunication, building and facilities management sectors. The platform is built on the MAPS SCADA software and Mitsubishi FX/L/Q series PLCs, for both control and data acquisition, to and from remote sites. The communication's intelligence lies in the standard PLC function blocks matched to an M2M driver in the MAPS SCADA.

In the system, the PLC becomes the master of all communications. The Mitsubishi M2M system does not require a fixed IP or Dynamic NDS middleware. This means you can use this system on any GPRS/GSM network and not require a static IP from your internet service provider. The only fixed IP required is at the MAPS I/O server. All data can securely be made available on a public APN.

Programming over the air

Mitsubishi's M2M system provides remote communication with the PLC without the presence of an on-site technician. The operator can monitor and control an individual device or group of devices through the MAPS SCADA interface. This system can also allow a technician to do PLC programming over the air to the M2M device: there is no need for a technician to go out to site to do a program change.

The intelligent M2M driver in MAPS automatically monitors the connection between the MAPS I/O server and the PLC in the field, without the need to poll or establish a connection to the device. The operator will be notified if the link goes down. The operator will also be notified when the communications link is healthy again. Information on communications is available for any device on the M2M network.

Mitsubishi's M2M system offers efficient communications with cost-effective data transfer. The PLC can be configured to send data on a time interval, on an alarm event, when the storage buffer limits are reached, or when it is manually polled. Event and alarm data is transmitted to the SCADA simultaneously. Communications can also be set to live mode which will show real time data as the site changes.

Ultimately, M2M communications makes data the definitive management tool, enabling us to implement and operate vastly more sophisticated and complex systems, whilst still maintaining a firm grip of what is happening within those systems. As we drive towards the new manufacturing paradigm of "˜Industry 4.0', with smart factories and products that effectively produce themselves, it is M2M that will provide the facilitator, with new device-to-device communication architectures replacing the master/slave network technologies that are currently the mainstay of automation networks. With newly intelligent machines and advanced software analytics, the factories and plants of the future will be able to optimise themselves to increase business performance and drive down costs.

To learn more about Mitsubishi's M2M system, please visit the website at gb3a.mitsubishielectric.com.

Mitsubishi Electric Europe B.V.

Travellers Lane
Hatfield
AL10 8XB
UNITED KINGDOM

+44 (0)1707 288780

automation@meuk.mee.com

https://gb3a.mitsubishielectric.com

More technical articles
2 days ago
Individual service for signal integrity
The demands on connection technology performance are constantly increasing. By providing customised support, Phoenix Contact helps customers select connection components to ensure the highest possible signal integrity.
2 days ago
Aveva MES rises in the leader ranks of the latest Gartner report
Aveva’s Manufacturing Execution Systems (MES) offering, which is deployed in the UK & Ireland by AVEVA Select partners SolutionsPT, has been recognised as a global leader in industrial software in the latest 2022 Gartner Magic Quadrant for Manufacturing Execution Systems.
3 days ago
Harwin and MSA Components sign German distribution deal
Harwin is bringing greater strength to its German supply chain through a new strategic partnership with MSA Components. The agreement allows MSA to offer all the latest products from Harwin’s extensive portfolio.
3 days ago
Siemens selected by Microsoft for RAMP Programme
Siemens Digital Industries Software has been selected to participate in the Rapid Assured Microelectronics Prototypes (RAMP) Phase II initiative.
3 days ago
Kontron receives VDC Research’s Gold Award for vendor satisfaction
Kontron has been recognised for outstanding customer satisfaction. The company has received the Gold Vendor Satisfaction Award for IoT and Embedded Hardware technology from VDC Research.
3 days ago
Mouser wins Vishay Distributor of the Year Award
Mouser Electronics has received the 2021 High Service Distributor of the Year award from Vishay Intertechnology, one of the world’s largest manufacturers of discrete semiconductors and passive electronic components.
4 days ago
What changes does the new machinery regulation bring?
As the machinery regulation replaces machinery directive 2006/42/EC, Dirk Meyer, specialist engineer solution architect at Eaton, looks at what is changing.
4 days ago
Klüber Lubrication receives Schaeffler Supplier Award 2022
Schaeffler has awarded Klüber Lubrication with the Supplier Award 2022 in the field of quality. The jury emphasised in particular the global supplier's strong commitment to the compliance with quality standards.
4 days ago
Essentra Components cuts energy usage by 15% globally
An innovative energy reduction initiative based on the concept of insulated jackets is helping industrial components manufacturer Essentra Components cut its energy usage when heating machine barrels by 15% and save CO2 emissions in the process.
5 days ago
Fluke addresses requirements to improve operational efficiencies
Rising energy costs and more stringent legislation guiding sustainable practices is spurring companies to re-evaluate processes and seek new tools and technologies to reduce waste and overcome challenges in today’s industrial environments.

Login / Sign up