Modified car undertakes world tour to showcase iglidur bearings

Celebrating 30 years of its iglidur materials, igus has sent a small car (a Smart ForTwo), equipped with iglidur plain bearing components, on a round-the-world tour. Putting the resilience and potential of its tribo-polymers to the test, the car, with its easily recognisable igus orange livery, will travel across four continents on different road conditions, ranging from the tarmac we are used to in the UK to muddy tracks.

Rob Dumayne, director at igus says: "Low-friction and self-lubrication is the modern solution for a wide range of moving applications. To continuously improve our products, we have been conducting research in this area during these three decades using our in-house test laboratory, the largest in the sector."

To demonstrate the capabilities of the carefully tested, innovative polymer technology, which has now been used millions of times, igus has retrofitted a car with over 50 iglidur components and send it on a strenuous round-the-world trip along tarmac, gravel and mud tracks. On the way, it will spread the company's motto to the world: plastics for longer life - travelling first to India, then China. Further Asian countries of Japan, South Korea and Taiwan will then follow before the car makes the crossing to North America for a coast-to-coast tour through Canada and the USA. The route plan then returns to Europe. Every stop and every kilometre can be experienced and tracked in detail at

Specific features make iglidur plain bearings especially suitable for the use in the chassis, engine compartment and gearbox, such as insensitivity to dust and dirt, pressure resistance and attenuation. For door hinges and other moving applications, iglidur is equally well suited as it is corrosion-free, self-lubricating and silent. Meeting industry demand for lightweight construction, these low-weight plastic parts also help contribute to reducing overall fuel consumption. In addition to this, they are cost-effective and offer economic options for mass production.

Application areas

To prepare the car for this ambitious practical test, it was first retrofitted by a team from Cologne University of Applied Sciences under the leadership of Johannes Thomé and the igus bearing developer Michael Krug. The aim was to replace everything possible with igus plastics - in so far as technically feasible and permitted by TUV regulations. The metal bearings on the brake pedal, windscreen wipers and window lift mechanism, along with the shift unit, seat console, handbrake and alternator were replaced with pure polymer iglidur bearings. Also replaced with the iglidur bearings was the throttle valve and the convertible roof mechanism.

Many modules had to be disassembled and rebuilt to factory and functional specifications. Although standard plain bearings could often be used, in some cases CAD models were needed to create carefully customised spare parts. The components were then milled or turned from iglidur stock bar; this involved the use of several of the 45 different iglidur catalogue materials being installed at a total of 56 bearing points. Attention was even paid to ensuring visual likeness - such as in the seat locking mechanism.

Rob Dumayne asserts: "More and more manufacturers supplying the automotive industry are discovering the qualities and potential of these high-performance components made from igus tribopolymers, a trend that will become even greater in the future. This is because maintenance and corrosion-free polymer plain bearings that require no external lubrication, and weigh seven times less than metallic rolled bearings, speak for themselves - they are kind on both the environment and the pocket as they reduce production costs and offer a longer service life thanks to their wear resistance.

"In vehicle interiors, they are the ideal solution for dampening noise. At the same time, however, their robust structure and resilience make them equally predestined for 'outdoor use', which will be clearly manifested when they encounter the many weather conditions, high altitudes and road types along their journey. The range of potential uses has far from been exhausted and perhaps the polymer-bearing-packed car's demonstration trip around the world will inspire developers to come up with further new and exciting ideas and concepts."

For more information about iglidur plain bearing componentsgo to

igus (UK) Ltd

51A Caswell Road

+44 (0)1604 677240

More news
16 hours ago
RS Components partners with HMS Networks
RS Components has partnered with HMS Networks, a leader in industrial information and communication technology, to significantly expand its industrial equipment networking solutions offering.
21 hours ago
Mouser Electronics receives TDK’s top distribution awards
Mouser Electronics has received three top distribution awards from TDK. Mouser was honoured with TDK’s Global Best Performance Award for Fiscal Year 2022, North America Distributor of the Year for Calendar Year 2021, and European Distribution Award in High-Service Distribution for 2021.
1 day ago
White Paper addresses assembly challenges
Resolve assembly challenges instantly with Henkel’s new high performance LOCTITE 402, an innovative instant adhesive that also improves workplace safety. Download the all-new white paper here.
1 day ago
Schaeffler organises worldwide Climate Action Day
June has seen Climate Action Day at all Schaeffler locations worldwide, with every one of the approximate 83,000 Schaeffler Group employees stopping work for 90 minutes to focus on climate issues.
1 day ago
Yokogawa helps Solar Team Twente to solar challenge win
Yokogawa’s WT5000 precision power analyser has been used by Solar Team Twente to win the first ever Solar Challenge Morocco. The WT5000 helped the team to squeeze every last watt out of its car’s solar power system, ensuring it crossed the finish line of the 2,500 km course in first place.
1 day ago
HVACR OEM relies on Emka locking technology
When HVACR OEM Hansa Klimasysteme needed new connecting elements for the corners of its air-conditioning units to stabilise the housing cube, suitable for die-casting, it turned to Emka.
2 days ago
LEM holds inauguration ceremony for new production plant
Electrical measurement specialist LEM has held an inauguration ceremony in Penang, Malaysia for its new production plant. The ceremony marked a major step in the plant’s construction with the first electric current sensor products expected to come on-line in Q1 2024.
2 days ago
ITI acquires digital manufacturing specialist Cimlogic
ITI, one of the UK’s largest independent systems integrators, has acquired Cimlogic, a leading digital manufacturing solutions and services provider to some of the world’s largest manufacturers.
3 days ago
Atlas Copco saves precision sheet metal manufacturer over £6,000 a month
When Constant Group, a Manchester-based supplier of sheet metal parts, components, and fully assembled fabrications pieces were let down by their previous service provider for onsite high-pressure nitrogen generation, they turned to Atlas Copco for help.
3 days ago
Timber plant reduces downtime with NSK linear guides
Thanks to the adoption of NSK’s linear guides with K1 lubrication units, a timber manufacturer managed to reduce conveyor downtime by a factor of more than 12, prompting annual cost savings of more than €77,000.

Login / Sign up