Monitoring reverse osmosis systems

Greg Wainhouse of Bürkert explains the process of reverse osmosis and looks at how a brewery has introduced new machines to help them with it.

Food and beverage manufacturers use reverse osmosis to purify process water, which may originally come from either the mains supply or a borehole. In either case, the objective is to produce a consistently high-quality water supply for the manufacturing process. Sampling and testing of the water is crucial to achieving this, so improving accuracy and consistency has major benefits. Reverse osmosis (RO) uses pressure to force water through a membrane leaving salts and dissolved solids behind. The process delivers consistently high-quality water, provided the membranes do not become blocked or breached, allowing impurities to pass through. RO on an industrial scale uses banks of membranes connected in parallel to maximise the volume of water being purified. The water quality is monitored using various methods, depending on the needs to the manufacturing process. The most common arrangement is the use of differential pressure sensors on either side of the membranes as well as conductivity measurements being taken on the "˜pure' water side. The difference between inlet and outlet pressures will change as the filter becomes blocked with impurities. System alarms can be configured to alert maintenance staff that the filter needs to be cleaned.

Water that has passed through the RO system, known as the permeate, should have a very low conductivity reading and this can be checked by manually removing samples and testing them in the on-site lab. However, depending on the number of samples being taken each day, this can be a time-consuming exercise. Regular sampling and testing will clearly deliver a more accurate picture of the water quality and pick up an anomaly more quickly. Better still, an automated process that is capable of sampling multiple lines consistently and providing alarm signals as soon as a membrane breach is detected can be used. As fluid control experts, Bürkert has developed a specialist permeate monitoring system for just this purpose. The advantages are best explained by examining a real-world example. A beer and cider manufacturer that relies on boreholes for its source of process water was using a conventional RO system with 45m3 of water required per hour. Most RO systems will have a conductivity sensor on the common outlet, but these can struggle to detect small impurities that may arise from damage to a single membrane.

With only a very limited storage capacity, the volume of production water from the RO system needed to keep up with the manufacturing processes. This meant that downtime had to be kept to an absolute minimum. The brewery had found that certain membranes could foul up quicker than others. Conductivity levels could be seen to slowly increase as one filter became blocked and this was quickly followed by several others, causing the conductivity level to increase rapidly. As soon as several filters became blocked, the RO system had to be stopped and repaired as quickly as possible. If this could be achieved while the buffer of stored water is used, then no production capacity was lost. However, if the repair was likely to take more than a few hours, the company needed to hire in a mobile RO system to enable production to continue.

Because mobile RO systems can cost tens of thousands of pounds per week to hire, in addition to the costs of lost production while the backup system is connected, the brewery approached Bürkert looking for an improvement to its existing system. It also desired more information about how they could improve the monitoring of water quality. The brewery wanted to measure the conductivity of the water from each filter to determine when it either became blocked or started to leach impurities. This would allow the maintenance team to remove the filter from the system without impacting the production process.

Bürkert's permeate monitoring system connects to each pressure pipe, regularly samples water from each membrane and tests it for conductivity. This enables a central display to provide the current status of each membrane, with information also available to remote monitoring points if necessary. The automation of the sampling and testing processes offers several advantages. Tests can be performed more frequently without increasing the workload of the staff. This also improves the consistency of results, which can be variable when conducted manually and by different personnel. Data is also recorded by the automated system, which applies trend analysis, allowing maintenance activities to be planned ahead and reducing any downtime even further. In addition to the improved reliability, the time saved in automating the sampling and testing process reduces the payback period; for a typical 40 pressure pipe system, this can be equated to a saving of 108 hours per year, that can be better spent elsewhere in the plant.

The brewery has decided that, with increasing levels of impurities in the borehole water, the flexible, automated monitoring system from Bürkert will deliver a range of benefits including increased productivity and process reliability. Designed for easy integration to existing control frameworks, the on-board PLC and software with a choice of communication protocols, the Bürkert permeate monitoring system can be easily connected to onsite SCADA and process control devices. Irrespective of the application, RO systems need to be regularly monitored to ensure water quality standards are maintained and to identify potential issues at the earliest opportunity. In this way, running costs can be kept to a minimum and product quality can be assured.

Learn more at www.burkert.co.uk.

Burkert Fluid Control Systems

Fluid Control Centre
1 Bridge End
Cirencester
GL7 1QY
UNITED KINGDOM

+44 (0)1285 648720

sales.uk@burkert.com

www.burkert.co.uk

More from Burkert Fluid Control Systems

Unifying the process control network

Posted 1 week ago

Bürkert valves ensure latest standards prevail

Posted 4 weeks ago

Sweet success for process control reliability

Posted 1 month ago

Full steam ahead for training

Posted 1 month ago

Process valve island increases dosing accuracy

Posted 2 months ago

Carbon capture technology on the rise

Posted 3 months ago

Water treatment improvements for power station hit full flow

Posted 3 months ago

Network integration – search for value and simplicity

Posted 4 months ago

ATEX certification for new pneumatic valve island

Posted 4 months ago

Ironing out the doubt: iron measurement in water quality analysis

Posted 5 months ago

Flowmeter range expands

Posted 6 months ago

Pure water: quality monitoring is a vital asset

Posted 6 months ago

New flow controller for low volumes

Posted 7 months ago

Delivering high precision for time-pressure microlitre dosing

Posted 8 months ago

Online water analysis module continuously measures iron content

Posted 1 year ago

Movie of the month

Posted 1 year ago

Time-pressure controller for high-precision microlitre dosing

Posted 1 year ago

How to simplify industrial process automation using IO-Link

Posted 1 year ago

Multi-parameter flow meter cuts waste by identifying fluids

Posted 1 year ago

Burkert invests in fully automated multi-medium testing facility

Posted 1 year ago

Burkert UK now supplying customisable micro precision pumps

Posted 1 year ago

Bürkert appoints new Account Manager for the South West

Posted 1 year ago

Smart valve positioner features IO-Link connectivity

Posted 1 year ago

Bürkert delivers savings for new life science facility

Posted 1 year ago

How to choose the right process control valves

Posted 1 year ago

Controller achieves micro-precision for time-pressure dosing

Posted 1 year ago

Intelligent valve islands for process automation applications

Posted 1 year ago

Retrofitted control heads extend life of 200 process valves

Posted 1 year ago

Enhanced radar level measurement for hygienic applications

Posted 1 year ago

Bürkert microfluidics expertise improves antibody discovery

Posted 1 year ago

Bürkert launches compact Type 6164 cartridge valve

Posted 1 year ago

Continuous monitoring and analysis of water quality

Posted 1 year ago

What is needed to improve fuel cell technology?

Posted 1 year ago

Flow measurement in the food and beverage sector

Posted 1 year ago

Bürkert virtual exhibition stand offers web and VR experience

Posted 1 year ago

Integrated water quality monitoring for water treatment service

Posted 2 years ago

Movie of the month

Posted 2 years ago

Flexible water analysis system saves time and money

Posted 2 years ago

Bürkert UK expands stock of standard process valves

Posted 2 years ago

Hygienic flowmeter specified for pharmaceutical cleaning system

Posted 2 years ago

Process control expertise at the ISPE Europe Annual Conference

Posted 2 years ago

Flowmeter gains the ability to detect different fluids

Posted 2 years ago

Finding the right partner for hygienic process control projects

Posted 2 years ago

Burkert UK expands product range and increases stockholding

Posted 2 years ago

Brewery upgrade improves reliability

Posted 2 years ago

multiCELL controller supports Champagne production

Posted 2 years ago

Support for system integrators

Posted 2 years ago

Burkert contributes to more efficient fluid control system

Posted 2 years ago

Burkert to exhibit hygienic products at EHEDG Conference 2018

Posted 2 years ago

Patties still a firm favourite thanks to 10-year-lasting valves

Posted 2 years ago

Multifunction controller features Ethernet connectivity

Posted 2 years ago

Solenoid control in potentially explosive atmospheres

Posted 2 years ago

New monitoring system simplifies micro-filtration of water

Posted 2 years ago

Micro-dosing technology and process integration

Posted 2 years ago

Using automation to improve process water quality

Posted 2 years ago

Movie of the month

Posted 3 years ago

Optimising repeatability and efficiency through automation

Posted 3 years ago

New flowmeters to look out for in 2018

Posted 3 years ago

Simplified process control for reverse osmosis plant

Posted 3 years ago

Comparing flowmeters: Coriolis vs. Surface Acoustic Wave

Posted 3 years ago

Precision control for CIP processes

Posted 3 years ago

Pneumatic valve island improves flexibility and diagnostics

Posted 3 years ago

Bürkert's new valve control heads provide networking options

Posted 3 years ago

Using Industry 4.0 to optimise process control

Posted 3 years ago

Re-engineering diaphragm valves

Posted 3 years ago

Taking pneumatic process control to a new level

Posted 3 years ago

Precise flow control for efficient, accurate pneumatic conveying

Posted 3 years ago

High-temperature control for exhaust analysis

Posted 3 years ago

Burkert: managing a culture of innovation

Posted 3 years ago

More function modules for Burkert compact water analysis system

Posted 3 years ago

Bürkert Pneumatic Control Valve Island interfaces with ET 200SP

Posted 3 years ago

Wave of success for new flowmeters"¦

Posted 3 years ago

Bürkert UK extends customisation and assembly service

Posted 3 years ago

Optimum level and flow control for food industry processes

Posted 3 years ago

Minimising waste in hygienic control valve applications

Posted 3 years ago

Seal of approval for Bürkert solenoid valves

Posted 4 years ago

How to choose a surface coating technology

Posted 4 years ago

Bürkert increases stock levels to support maintenance market

Posted 4 years ago

Do Food & Beverage SMEs need more process automation?

Posted 4 years ago

New light-weight precision flow meter suits process skids

Posted 4 years ago

Developing an alternative to Coriolis

Posted 4 years ago

Improving flow control in pneumatic conveying systems

Posted 4 years ago

Delivering on the requirement for ATEX control panels

Posted 4 years ago

Bürkert maintains price freeze for 2017

Posted 4 years ago

Bürkert offers fast delivery on full-bore mag flowmeters

Posted 4 years ago

Bürkert appoints new account manager for Ireland

Posted 4 years ago

Steam control valves: getting the most from this vital component

Posted 4 years ago

New networkable hygienic valve actuators from Bürkert

Posted 4 years ago

Pneumatic valves for SIL1 or SIL2 safety control systems

Posted 4 years ago

Bespoke process control systems for the food & beverage industry

Posted 4 years ago

Electromotive process valves deliver precision alternative

Posted 4 years ago

Clinical diagnosis benefits from design collaboration

Posted 4 years ago

Keeping control valves clean, inside and out

Posted 4 years ago

Hygienic 2-way bellows control valve for small flow rates

Posted 4 years ago

Upgrading process safety with compact control valves

Posted 4 years ago

Top 10 level-sensing technologies

Posted 4 years ago

Fast, reliable switching without pneumatics

Posted 4 years ago

Retrofit safety using innovative control valves

Posted 4 years ago

Bürkert launches Virtual Water Treatment Works

Posted 4 years ago

Building selective catalytic reduction systems

Posted 5 years ago

Emerging food preservation technology requires precision control

Posted 5 years ago

Precision gas control for experimental combustion rig

Posted 5 years ago

Electromotive process valves make compressed air obsolete

Posted 5 years ago

Meeting the demand for more complex process control systems

Posted 5 years ago

Bürkert cartridge valve is suitable for custom manifold designs

Posted 5 years ago

Developing new fluid management systems for in-vitro diagnostics

Posted 5 years ago

Bürkert launches hydroformed hygienic diaphragm valve

Posted 5 years ago

Bürkert improves functionality of ELEMENT controllers

Posted 5 years ago

Gas control for metal surface treatments

Posted 5 years ago

Measuring pH in a food-safe environment

Posted 5 years ago

Process control design - don't let ATEX restrict your plans

Posted 5 years ago

Bürkert application segmentation delivers across industries

Posted 5 years ago

Desktop autoclaves achieve reliability with Bürkert steam valves

Posted 5 years ago

Designs for controlling hot processes - it's all material

Posted 5 years ago

Controlling CIP / SIP in food processing applications

Posted 5 years ago

Energy saving with process valves

Posted 5 years ago

Solenoid valves - one for every occasion

Posted 5 years ago

Bürkert valve expertise delivers a premium shower experience

Posted 5 years ago

Control of water treatment with Bürkert multiCELL

Posted 5 years ago

Solenoid valves - some are more equal than others

Posted 5 years ago

Design & maintenance crucial to avoiding water hammer

Posted 5 years ago

Bürkert hazardous area-rated pneumatics in whisky bottling plant

Posted 6 years ago

Under Pressure - sensors in the spotlight

Posted 6 years ago

All new Bürkert website: cool tools, easy navigation and eShop

Posted 6 years ago

Bürkert helps to improve efficiency at UK car engine plant

Posted 6 years ago

Autoclave uses compact Bürkert process valves to meet targets

Posted 6 years ago

Free solenoid valve selection chart offered by Bürkert

Posted 6 years ago

Solenoid valves - an enduring design refined over time

Posted 6 years ago

Intelligent control for food processors

Posted 6 years ago

Bürkert's fluid control expertise now available direct to OEMs

Posted 6 years ago

Bürkert's multiCELL provides localised sensor signal management

Posted 6 years ago

Water control and analysis system with plug-in Sensor Cubes

Posted 6 years ago

Making the grade - achieving compliance with food standards

Posted 6 years ago

Bürkert releases new flowmeters for high-volume gases

Posted 6 years ago

Sensors 101: understanding sensors within a fluid control system

Posted 6 years ago

Modular valve body reduces energy needs and improves system flow

Posted 6 years ago

Sizing of pipework for steam applications for reliable operation

Posted 6 years ago

New valve body concept simplifies complex pipe interfaces

Posted 7 years ago

Design and components for pneumatic control automation systems

Posted 7 years ago

Improved functionality for batch controller and flow transmitter

Posted 7 years ago

Efficient bespoke effluent monitoring and batch control systems

Posted 7 years ago

Intelligent valve reduces pipework by switching multiple flows

Posted 7 years ago

Control signals - which option is best?

Posted 7 years ago

Steam expertise reduces costs in pet food production

Posted 7 years ago

Bürkert Technical Training to provide local options for 2014

Posted 7 years ago

Local development process delivers micro-fluidic valve systems

Posted 7 years ago

Electrically actuated quarter-turn valves for a range of options

Posted 7 years ago

Steam: how to manage it safely & efficiently

Posted 7 years ago

Free guide matches valves with chemical resistance properties

Posted 7 years ago

Fruit syrup production benefits from smart valve control

Posted 7 years ago

Tried and tested valve design nears 50 years of reliable service

Posted 7 years ago

Does your valve have the correct chemical resistance properties?

Posted 7 years ago

Microfluidics - micro dosing pump is precise and reliable

Posted 7 years ago

Integrated modular systems are key to precise gas handling

Posted 7 years ago

Bürkert improves control of water oxygenation

Posted 7 years ago

What's next in process control for the water treatment industry?

Posted 7 years ago

Retrofit control head enables automation of most process valves

Posted 7 years ago

Bürkert unveils new intelligent valve positioner

Posted 7 years ago

Bürkert reports excellent results from Total expo

Posted 7 years ago

Valves - when to repair or replace?

Posted 7 years ago

Bürkert launches new range of intelligent valve control heads

Posted 8 years ago

Seminar on valve innovation in the pharmaceutical sector

Posted 8 years ago

Free ATEX selection poster demystifies explosion criteria

Posted 8 years ago

Bürkert at Total Process & Packaging Exhibition 2013

Posted 8 years ago

New training brochure now available from Bürkert

Posted 8 years ago

Bürkert valves help TV science show with 360 degree swing

Posted 8 years ago

Direct-acting solenoid valves for fluids, gases, vacuum & steam

Posted 8 years ago

Free booklet for products and systems for producing clean steam

Posted 8 years ago

AS-I communication bus-equipped Element diaphragm valves

Posted 8 years ago

Bürkert UK officially opens the doors to its new UK headquarters

Posted 8 years ago

Fuel-cell race car relies on Bürkert valve technology

Posted 8 years ago

Bürkert Technical Training Schedule released for 2013

Posted 8 years ago

Burkert launches new butterfly valves

Posted 8 years ago

Burkert UK moves to new UK headquarters in Cirencester

Posted 8 years ago

Process valves that can "˜think' for themselves

Posted 8 years ago

AirLINE Quick valve island pneumatic system for process controls

Posted 8 years ago

Modern alternative to conventional variable area flow meters

Posted 8 years ago

Free Steam Site Guide aims to make steam systems safer

Posted 8 years ago

Design & Manufacture service for packaged batch controls

Posted 8 years ago

New multiCELL universal transmitter and sensor controller

Posted 8 years ago

Miniature valves for medical equipment reduce energy consumption

Posted 8 years ago

Three-tier approach for automation of hygienic processes

Posted 8 years ago

Free Select Catalogue provides faster fluid control deliveries

Posted 8 years ago

Multi-port valve interfaces meet life science plant requirements

Posted 8 years ago

Universal control head for hygienic processing industries

Posted 9 years ago

Flow transmitter and pulse divider combined in a single device

Posted 9 years ago

Express delivery for Namur interface valves from Burkert

Posted 9 years ago

Problem of contaminant ingress into diaphragm valves solved

Posted 9 years ago

Process automation quadruples brewery production

Posted 9 years ago

AirLINE Quick simplifies assembly of pneumatic control panels

Posted 9 years ago

Free training courses in Hygienic Processing

Posted 9 years ago

See Element process control products at Sensors + Systems

Posted 9 years ago

Digital flow transmitters are designed to be future-proof

Posted 9 years ago

Fountain control saves space, energy and money

Posted 9 years ago

Burkert extends Element range of process control components

Posted 9 years ago

Automated CIP saves pharmaceutical manufacturer £120,000 pa

Posted 9 years ago

PFA-lined stainless steel diaphragm valves resist corrosion

Posted 9 years ago

Type 2080 2/2-way valve with PTFE bellows for hygienic processes

Posted 9 years ago

Drinks manufacturer installs intelligent process valves

Posted 9 years ago

Multi-functional valve block for steam sterilisation systems

Posted 9 years ago

8175 ultrasonic level transmitter in IP65 or IP67 housings

Posted 10 years ago

Free courses: steam engineering and condensate management

Posted 10 years ago

Single controller for both process and proportional valves

Posted 10 years ago

Miniature solenoid valves specified for dosing machine

Posted 10 years ago

Element Neutrino analytical transmitters are more versatile

Posted 10 years ago

SideControl units achieve intelligent valve positioning

Posted 10 years ago

Customised ball valves used in fuel tank protection system

Posted 10 years ago

Burkert registers on Achilles Utilities Vendor Database

Posted 10 years ago

Ex-proof AirLINE Ex 8650 system chosen for North Sea project

Posted 10 years ago

Enamel-coated pH sensors offer advantages over glass types

Posted 10 years ago

Online monitoring of the reverse-osmosis systems

Posted 10 years ago

Control system replaces manual manufacturing process

Posted 10 years ago

Burkert appoints Fluid Controls as SE England distributor

Posted 10 years ago

How to save energy in hazardous area control systems

Posted 10 years ago

Miniature 3/2 isolation valve 'sets new benchmark'

Posted 11 years ago

Integrated liquid flow controller incorporates valve and sensor

Posted 11 years ago

Positioners/process controllers can mount on valve actuators

Posted 11 years ago

Spot welder 'tip off' detection using intelligent cooling system

Posted 11 years ago

Clever design halves the number of valves required

Posted 11 years ago

Compact flipper isolation valve delivers improved performance

Posted 11 years ago

Featured photo

Posted 11 years ago

Engine test rig benefits from globe valves and positioners

Posted 11 years ago

Valve and positioner provide test rig coolant control

Posted 11 years ago

Robolux valves eliminate deadlegs and save costs

Posted 11 years ago

Microfluidics offer benefits for automation and miniaturisation

Posted 11 years ago

Burkert and BBS-Systems partner for hygienic processing

Posted 11 years ago

New version of mxControl multi-parameter controller

Posted 11 years ago

New fluid control systems catalogue from Burkert

Posted 11 years ago

Bio-diesel processor developed with help from Burkert

Posted 11 years ago

Electrical and pneumatic systems in hazardous areas

Posted 11 years ago

Ultrasonic flow transmitter delivers long-term stability

Posted 11 years ago

Posted 12 years ago

Free Brewery Process Control brochure from Burkert

Posted 12 years ago

Burkert launches Element modular process control products

Posted 12 years ago

MicroFluidics catalogue of standard and bespoke systems

Posted 12 years ago

Pick-and-mix modular general-purpose solenoid valves

Posted 13 years ago

446-page catalogue covers all fluid control needs

Posted 13 years ago

More applications