Mouser Electronics is now stocking MAX5995B power management IC (PMIC) from Maxim Integrated. The small PMIC provides a complete interface for powered device (PD) to comply with the IEEE 802.3af/at/bt standard in a Power-over-Ethernet (PoE) system.
Maxim's MAX5995B PMIC provides the PD with a detection signature, classification signature, and an integrated isolation power switch with startup inrush current control. The IC supports a multi-event classification method as specified in the IEEE 802.3bt standard, and provides a signal to indicate from Type 1 to Type 4 Power Sourcing Equipment (PSE). The MAX5995B PMIC also provides a Power-Good (PG) signal, two-step current limit and foldback control, and over temperature protection.
The device features an Intelligent Maintain Power Signature (MPS) function, ultra-low-power sleep mode, an input undervoltage lockout with wide hysteresis, and long de-glitch time to compensate for twisted pair cable resistive drop and to assure glitch-free transition during power-on/-off conditions.
The MAX5995B PMIC is available in a 16-pin, 5mm × 5mm TQFN power package with an operating temperature range of minus 40 to 85degC. The PMIC is suitable for VoIP phones, IP security cameras, wireless access points, small cell and picocell base stations, lighting, and building automation.
Follow the link to learn more about the MAX5995B power management IC at Mouser.
Artisan Building, Suite C, First Floor
Hillbottom Road
HP12 4HJ
UNITED KINGDOM
+ 44 (0)1494 467490