Mouser stocking MonoDAQ data acquisition devices

The MonoDAQ-U-X data acquisition tool is designed to help engineers with daily measurement tasks, serving as any of several discrete tools, such as a strain gauge amplifier, thermocouple interface, and voltage input, with a click of a button. The tool provides eight voltage inputs, four thermocouple inputs, full bridge strain gauge amplifier, power measurement and eight digital input/output (IO) pins.

The MonoDAQ-E-ACC is a single-channel signal conditioner with a high-precision isolated front end and an EtherCAT bus on the back side. Designed for use with integrated electronics piezoelectric (IEPE) sensors, the device incorporates a 24-bit analogue-to-digital-converter (ADC) with a maximum sample rate of 40 kilosamples per second and features a noise floor of minus 100dB with 100dB spurious-free dynamic range. MonoDAQ-E-ACC is specifically designed to serve the machine condition monitoring market.

The MonoDAQ-E-STG is a single-channel strain gauge amplifier with internal quarter-, half- and full-bridge configurations. The programmable, low-noise device allows engineers to set the input voltage from 50V to 100mV and current source excitation up to 22 mA. The MonoDAQ-E-gMeter is an all-in-one sensor and data acquisition device with an embedded triaxial MEMS accelerometer, ADC, and EtherCAT interface based on the MonoDAQ EtherCAT Platform. It is specifically designed to serve the structural health monitoring market. All MonoDAQ-E devices transmit power and signal over the same cable, allowing them to be distributed all over a structure or factory that requires monitoring.

To learn more about MonoDAQ data acquisition products available from Mouser, visit www.mouser.com/monodaq.