See demonstrations of printing, cutting and slitting

08 January 2009

Spartanicsvisit website


See demonstrations of printing, cutting and slittingSpartanics-Systec will host an Open House demonstration of new screen printing, laser cutting and automated slitting technology on 17/18 February 2009 in its demonstration centre in Bielefeld, Germany. Highlights will include:

Spartanics-Systec Fineprint Cylinder Screen Printing Line

This system (pictured) features electronic controls that eliminate manual adjustments, handle materials as thin as 12 microns, automate adjustments for shrink or stretch, and dynamically position web material within 0.1mm. The system also includes a vertical dryer that uses state-of-the-art heat-plate technology to dry both solvent- and water-based inks in a fraction of the time required by conventional ovens.

Spartanics-Systec Upgraded Screen Printing Heads

This is an existing screen printing line that has been modified to include electronic controls that eliminate manual adjustments.

Spartanics Finecut High-Speed Laser Cutting Machine

Tool-free cutting at up to 90 metres/minute! Cut-to-print registration laser-cutting equipment for label, solar thin film and gasket applications.

Spartanics-Systec Slitter

A standalone slitter for handling material up to 2m wide at 100m/minute.

Mike Bacon, Spartanics VP of sales and marketing, comments: "This showcase will be the first chance for many European screen printers to see the many Spartanics-Systec breakthroughs in electronic and servo-drive control technologies. We also are eager for European and worldwide label converters, manufacturers of RFID and solar products and others who can be well-served by Spartanics Finecut Laser Cutting Machines to take a detailed look at these systems. We find that many who looked previously at competitors' laser cutting systems are quite impressed by the dramatic improvements in cut quality, web speed, and overall performance of the Finecut systems.

The Open House will be held at Milser Strasse 37, Bielefeld, Germany D-33729. Attendees can pre-register by contacting Karl-Heinz Jordan on +49 521 32 95 035 or , or Mike Bacon on +1 847 394 5700 x 1960 or .

© Copyright 2006-14 The Engineering Network Ltd.