Belden contributes to standards for time-sensitive networks

22 July 2015

Beldenvisit website


Belden Inc. is involved in Smart FactoryKL and other initiatives aimed at realising the vision of Industry 4.0. Since 2009, the company has made important contributions in the IEEE 802.1 working group task force for time-sensitive networks (TSN), toward the standardisation of networking for applications with high real-time requirements.

Combining TSN with the open OPC Unified Architecture (OPC UA) specifications, which is the aim of a new working group of the OPC Foundation, will allow the Industry 4.0 vision of a high-performance real-time capable network to be realised without any vendor-specific technology. This will also significantly reduce the cost of ownership of networking sophisticated Industry 4.0 installations. Belden is one of the companies that have signed up to join this new OPC working group, among them Bosch Rexroth, General Electric, Kuka, Schneider Electric and National Instruments. With its knowledge and expertise from the standardisation process, Belden will be able to facilitate the necessary TSN knowledge transfer to the OPC group.

Dr Oliver Kleineberg, advance development manager for Belden’s Hirschmann brand, says: “All of our network devices use standardised technologies, since they offer users maximum flexibility, cost effectiveness and are future-proof. This is why Belden has been supporting the development of TSN standards from the very beginning. Unlike proprietary solutions, this open real-time technology does not require any cost-intensive technology-specific chips” Dr Kleineberg expects this to generate a growing market acceptance and extend the spread of standards-based real-time Ethernet, which he considers a prerequisite for implementing the sophisticated Industry 4.0 applications.

However, the TSN specification – which is expected to be published between 2016 and 2018 in the form of various IEEE 802.1 specifications – standardises only the communication on Layer 2 and, together with Ethernet transceivers, the underlying physical layer. Since OPC UA is already available as an international specification for higher protocol layers that are primarily used for machine to machine communication, the OPC working group now intends to combine this with TSN. Dr Kleineberg says: “This will result in an open architecture that can be used to fully network even the most demanding production processes.”

Such processes include modular Industry 4.0 production lines, which have to meet high real-time requirements, either for reasons of safety or to maintain very fast control cycles, and which also have varying layouts depending on the order situation. Dr Kleineberg explains: “OPC UA plus TSN can not only be used to enable the configuration of the participating machinery, but also to guarantee the necessary low end-to-end delay in direct machine to machine communication in the Industrial Internet of Things (IIoT).”

This standardised communication approach is an important step on the path to converting production processes from a rigid, centralised approach into one that is dynamic and decentralised.

To learn more about Smart Factory and the development of standards for time-sensitive networks, please visit

© Copyright 2006-14 The Engineering Network Ltd.