Nemesis mini-circular connectors are compact and lightweight

Demands on interconnectivity speed and integrity have increased significantly, driven by C4I (command, control, communications, computer and intelligence) systems and the requirement to improve operational efficiency and personnel survivability. ITT Interconnect Solutions has responded with its innovative Nemesis range: lightweight, small form-factor interconnects, fully-sealed to IP67 or IP68 for applications in the field such as vision systems, headsets, GPS equipment and radios, where weight and size reduction are critical. Nemesis mini-circular connectors provide excellent performance in harsh environments and are equally suited to non-military applications in medical equipment, marine applications and handheld devices.

ITT ICS has introduced a new no profile Space Saver Nemesis variant with what is claimed to be the lowest profile on the market, and a Ripaway decoupling action for rugged, wearable military communications equipment requiring interconnects for power, data and audio. Nemesis Super Clean connectors have a patented drawback barrel design that allows cleaning and reconnection in seconds under field conditions. Rugged stainless steel construction provides durability, while an enhanced strain relief design eliminates cable overstressing. Further features include ITT ICS's patented breakaway Pogo Pin contact technology that guarantees over 10,000 mating cycles and assures easy connector mating and unmating while retaining full 360-degree EMI shielding. The Nemesis pogo pad receptacle design eliminates the necessity for dust-caps and removes harsh environment fouling, which is often a problem with non-pad receptacles.

Further Nemesis design innovations include blind mating for reliable and fast connection without the need for visual or mechanical keying. An anti-reflective salt spray-resistant plating on the connector shells protects the cable interface and assists soldier concealability in marine environment manoeuvres, while the seamless ribbed overmoulding provides a non-slip grip in damp conditions. Available with RoHS-compliant black zinc nickel or electroless nickel plating, Nemesis connectors are said to be future-proof against anticipated revision of MIL standards.

Further Nemesis specifications are available at www.ittcannon.com.

ITT Interconnect Solutions (ITT ICS)

666 East Dyer Road
Santa Ana
CA 92705
UNITED STATES

+1 714 628 2173

allene.macklin@itt.com

www.ittcannon.com

More from ITT Interconnect Solutions (ITT ICS)

ITT's Interconnect Solutions launches enhanced website

Posted 7 years ago

QPL-approved MIL-DTL-38999 Series III connectors from ITT ICS

Posted 8 years ago

VEAM plastic connector saves weight in mass transit applications

Posted 8 years ago

Composite Mil-DTL-38999 Series III connector to reduce weight

Posted 8 years ago

New European 38999 connector assembly facility

Posted 8 years ago

ITT invests in UK assembly facility for MIL-DTL-38999 connectors

Posted 8 years ago

New "˜green' UCZ series for smart phones and hand-held devices

Posted 8 years ago

New Trinity MKJ3 mini-bayonet connectors

Posted 8 years ago

Sealed, lightweight Mil-DTL 38999 series III style interconnect

Posted 8 years ago

Trident High Voltage connectors are robust and secure

Posted 8 years ago

APD High Voltage connector handles up to 500V DC, 34A

Posted 8 years ago

Brass power contacts cost less than copper contacts

Posted 8 years ago

Marine bronze connectors for use in harsh environments

Posted 8 years ago

High-durability, low-cost Mil-DTL 38999 series II connector

Posted 8 years ago

Covers and connectors meet latest CFast standards

Posted 8 years ago

Filtered interconnect features miniature spring probes

Posted 8 years ago

ITT completes industry-focused spins offs

Posted 8 years ago

ICS PHD38999 connectors pass M38999 specification tests

Posted 8 years ago

Rugged IP67/IP69K interconnects resist vibration

Posted 8 years ago

VEAM PowerLock Box speeds reconnection of power supplies

Posted 8 years ago

Trinity MKJ series mini-circular connector CAD downloads

Posted 9 years ago

Downhole gauge connectors are robust and reliable

Posted 9 years ago

3D CAD models of Nemesis connectors available to download

Posted 9 years ago

Compact IP69K signal connector is rated for high temperatures

Posted 9 years ago

Nemesis mini-circular connectors are up to 50% lighter

Posted 9 years ago

Military and Aerospace Sourcebook of connectors

Posted 9 years ago

SC21 Silver Accreditation for ITT Interconnect Solutions UK

Posted 9 years ago

ITT reduces lead times on Chinese-manufactured products

Posted 9 years ago

Online utility creates 3D CAD models of connectors

Posted 10 years ago

New 90-degree interconnect for power applications

Posted 10 years ago

VEAM CIR-M12 connectors integrate different data types

Posted 10 years ago

BIW connectors selected for casino's geothermal well

Posted 10 years ago

Rail industry connector handles multiple data types

Posted 10 years ago

ITT to exhibit new interconnects at Eurosatory 2012

Posted 10 years ago

ITT introduces Perfect Wireless Interconnect for handheld device

Posted 10 years ago

New CFast welded cover sets and connectors

Posted 10 years ago

Surface-mount CFast host connector meets Compact Flash standards

Posted 10 years ago

Connector groups multiple data types in a single unit

Posted 10 years ago

APD direct PCB connector eliminates board-to-board connectors

Posted 10 years ago

New PowerLock Box with Flange for panel-mounting

Posted 10 years ago

Snap-on and ultrasonic PCMCIA I/O kits with choice of options

Posted 10 years ago

Rugged circular connector for multiple fibre optic terminations

Posted 10 years ago

Plastic connectors for lower-specification military applications

Posted 10 years ago

Cable receptacles for harsh environments and quick connections

Posted 10 years ago

High-strength aluminium connector shells are lighter than brass

Posted 10 years ago

High-reliability connector houses RF and signal contacts

Posted 10 years ago

LPC CP1/CP2 switching coaxial connector

Posted 10 years ago

ITT Interconnect Solutions makes website more user-friendly

Posted 10 years ago

Hermetically-sealed connector meets MIL-STD-810 Method 512.5

Posted 10 years ago

Rugged five-pin connector for portable power distribution

Posted 10 years ago

QLC zero insertion force connector for medical equipment

Posted 10 years ago

IP69K connectors for sensors in harsh environments

Posted 10 years ago

500V DC APD four-way connector for automotive applications

Posted 10 years ago

BIW Feedthru for metal-clad instrument cables

Posted 10 years ago

CGL power input connectors rated for 230-630V

Posted 10 years ago

BIW field-attachable Packer Feedthru System

Posted 10 years ago

High-temperature electric power feedthru

Posted 10 years ago

Finger protective connector for hybrid and electric vehicles

Posted 10 years ago

Electrical connectors are sealed yet cleanable

Posted 10 years ago

Universal Contact for angular alignment applications

Posted 10 years ago

Low-cost 19-way Pogo pin connector and cable assemblies

Posted 10 years ago

TVS surge suppression connectors use CoF filters

Posted 11 years ago

Frame kits conform to Type I and Type II CFast specifications

Posted 11 years ago

PowerLock Box offers sequential mating facility

Posted 11 years ago

Posted 11 years ago

Tempus connector series adds 2mm modular models

Posted 11 years ago

Circular interconnects are smaller and lighter

Posted 11 years ago

Posted 11 years ago

APD connectors are sealed to IP69K or IP68

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

HV MDM connector carries high- and low-voltage signals

Posted 11 years ago

Compact MDM PCB connector handles 100 signals

Posted 11 years ago

IP68 mini-circular connectors withstand high pressures

Posted 11 years ago

PT/M26482 connector protection caps give audible click

Posted 11 years ago

New metal backshells for D-Subminiature connectors

Posted 11 years ago

CA bayonet connectors offered with a choice of end bells

Posted 12 years ago

High-density connectors accommodate 300 contacts

Posted 12 years ago

Compact stacking power interconnect unit saves cost

Posted 12 years ago

Premier Cables to distribute ITT Powerlock connectors

Posted 12 years ago

Application Note aids customisation of PCMCIA Express cards

Posted 12 years ago

Rugged connectors for industrial and other harsh applications

Posted 12 years ago

Universal Contact ensures consistent contact integrity

Posted 12 years ago

High-reliability connectors cope with elevated temperatures

Posted 12 years ago

Corrosion-resistant MIL-spec D-subminiature connectors

Posted 12 years ago

Compact connectors suit industrial instrumentation

Posted 12 years ago

CIR LK quarter-turn connectors are sealed to IP65

Posted 12 years ago

Sequential mating system requires less space

Posted 12 years ago

Specially developed interconnect interfaces fibre optics

Posted 12 years ago

Centre of excellence for military and aerospace interconnects

Posted 12 years ago

Filter connector resists thermal shock and vibration

Posted 12 years ago

Nano-miniature connectors save space and weight

Posted 12 years ago

Servo connectors have greater capacity

Posted 12 years ago

Powerlock connectors ensure safety and reliability

Posted 12 years ago

Circular connectors for reliable power distribution

Posted 12 years ago

Cm2 connectors save space and weight on servo motors

Posted 12 years ago

Micro-miniature circular connectors offer high reliability

Posted 12 years ago

New brochure explains interconnect technologies

Posted 13 years ago

120-page catalogue covers rack and panel connectors

Posted 13 years ago

Chip on Flex filter connector survives 1000 thermal cycles

Posted 13 years ago

Micro-D Pi filter connector suits defence and avionics

Posted 13 years ago

Connector website speeds access to design data

Posted 13 years ago

Multi-pin connectors are more versatile than most

Posted 13 years ago

Universal contacts have pre-load and anti-lift features

Posted 13 years ago

Modular stacking connectors carry power and signals

Posted 13 years ago

Circular connectors help to cut wiring costs

Posted 13 years ago

Chip on Flex filter connectors offer high reliability

Posted 13 years ago

Sequential mating system ensures security of supply

Posted 13 years ago

Micro interconnect assemblies for digital, RF, HV and power

Posted 13 years ago

New Cannon Express Card connectors and cover sets

Posted 13 years ago

Low-profile servo connector replaces conventional round designs

Posted 13 years ago

Servo motor connector is 50 per cent smaller

Posted 13 years ago

19-pin threaded connectors are tough and sealed to IP67

Posted 13 years ago

More products
1 day ago
Zero tolerance towards hose re-ending says BFPA
Nigel Thomason, British Fluid Power Association Distributor Chairman, condemned hose re-ending across industry as the UK’s fluid power trade association launched its ‘Choose Q for Quality’ campaign highlighting BFPA Approved Quality Members
1 day ago
New laser micrometer offers greater flexibility
Micro-Epsilon has extended its optoCONTROL 2520 series of optical laser micrometers with a new version offering double the measuring range of its existing version
1 day ago
Self-adhesive gaskets certified for hygiene applications
EMKA has introduced new self-adhesive gaskets that are approved to hygiene standard VDI 6022
2 days ago
Online igus trade show attracts thousands of engineers
Digital engineering support during a pandemic: thousands have visited the igus online trade exhibition
2 days ago
Robotics Innovation Award Nominees 2020
The finalists in the 16th Award for Innovation and Entrepreneurship in Robotics & Automation (IERA) showcases the latest skills robots have acquired to assist humans at work
2 days ago
Guide to choosing the right cable clamp
The integration of electrical and electronic systems into machines and panels always involves addressing wiring, and considering things like strain relief, accessibility, routing, and security. Essentra Components has published a new guide which might prove helpful in these cases
3 days ago
Discover maxon’s new online trade fair
MachineBuilding.net readers can visit the virtual maxon booth to discover the company’s latest products. In addition to the newly announced MiniMACS6 master controller, visitors will find high torque BLDC motors as well as flat motors for robotics and an update on the Mars rover
3 days ago
New prism optic reflector offers 8m range
With the introduction of its Sceptre high-performance prism optic reflector, SICK has extended the range of its deTem 4 A/P multiple light beam system to eight metres
4 days ago
New Always-On vibration and temperature condition monitoring kit
The new FLIR SV87-KIT is said to offer machine builders a low cost, easy-to-configure 24/7 remote vibration and temperature sensing solution
4 days ago
New brochure on standard components for packaging machines
Elesa has published a new brochure dedicated to the packaging industry. It features the company’s full range of standard components for machine designers involved in the wider packaging industry, including bottling and labelling in the food and pharmaceutical sectors