New fasteners for Kanya aluminium framework system
Posted to News on 18th Jun 2010, 10:15

New fasteners for Kanya aluminium framework system

Thinking Space Systems is now supplying the two new fixings for the Kanya aluminium framework system, namely stainless steel threaded plates and hammer nuts. Both are designed for use with base 20, 30, 40 and 50 aluminium profiles.

New fasteners for Kanya aluminium framework system

Image
The stainless steel threaded plates measure 21x18mm or 12x12mm and can be ordered with M3, M4, M5, M6 or M8 threads (depending on the base size). The threaded plates are inserted into the profile groove before assembly, providing a robust connection point for other extrusions or components at any point along the T-slot. A retaining spring holds the threaded plates in position during assembly.

Image
Zinc-plated steel hammer nuts are also available in two sizes to suit the different base extrusions, only these can be inserted into the slot after assembly and are held in position by a spring. As they are only 8mm wide, the hammer nuts enable components to be assembled very close to each other. Thread sizes are M3 to M6.


Kanya UK (Thinking Space Systems Ltd)

Unit 10b, The Quadrangle
Abbey Park Industrial Estate
SO51 9DL
UNITED KINGDOM

+44 (0)1794 516633

Bosch Rexroth Mechan Controls Ltd Lenze Selection (a Division of Lenze Ltd) SICK (UK) LTD Matara UK Ltd ABSSAC Ltd Aerotech Ltd Top Hex Ltd Dold Industries Ltd Moore International Ltd Kawasaki Robotics (UK) Ltd Phoenix Contact Ltd Machinesafe Compliance Ltd Heidenhain (GB) Ltd Smartscan Ltd AutomateUK AutomateUK Leuze electronic Ltd HARTING Ltd Spelsberg Els UK Ltd PI (Physik Instrumente) Ltd Pilz Automation Ltd maxon Group FATH Components Ltd Rittal Ltd Murrelektronik Ltd Servo Components & Systems Ltd STOBER Drives Ltd Euchner (UK) Lenze Selection (a Division of Lenze Ltd) Procter Machine Safety