Unit is said to provide an operator-friendly solution which allows users to manage equipment safely, accurately and quickly
The new MPI-R10 magnetic measuring system from Elesa is available in an IP54 or IP67 housing and provides a seven-digit remote readout of linear or angular measurements. The new unit is said to provide an operator-friendly solution which allows them to manage equipment safely, accurately and quickly without the need to personally access the materials or the measuring head. The MPI-R10 has an accuracy of +/- 0.1mm and a resolution of 0.01mm, making it suitable for use in many sectors and industries, says Elesa. The new magnetic measuring system has already proven useful across machining, cutting, assembly and positioning for woodwork and structural component assembly such as building fabrication. The new unit is said to be especially useful for situations in which contact isn’t advisable or where dirt, dust or swarf may interfere with other measuring equipment.
The MPI-R10 magnetic measuring system is used with an FC-MPI sensor in combination with an M-BAND-10 magnetic strip to form a complete system for the measurement of linear and angular displacement (with a minimum radius of 65 mm). The system is characterised by easy assembly and offers precise alignment and positioning, reducing time and keeping machining cycle times to the minimum. Maximum ease of assembly and disassembly is complemented by 4 multifunction keys for easy programming to display values in millimetres, inches or angular degrees as either absolute or incremental readings. The MPI-R10 provides up to10 programmable offset values with storage and display of 32 target positions. The display is housed with a polycarbonate front plate which is resistant to greases, oils, alcohol and mineral acids.
The FC-MPI magnetic sensor with cable features a die-cast zinc alloy nickel-plated body and snap assembly cable connector, which facilitates insertion and guarantees a correct connection even in the presence of vibration or accidental movement. Measurement is facilitated by a self-adhesive M-BAND-10 strip for attachment to the machine base.