New spring-applied brake is tough

Standard enclosure rating for the BFK470 is IP65 achieved through seals between the casing and the mounting surface. A manual release lever is available, also a proximity switch to monitor brake status and both these options do not degrade the IP65 rating. These brakes suit both static holding duties and dynamic braking. The duty cycle rating is 100 per cent. To help with selection for different types of duties and loads there are five different brake disc options, all fitting within the standards dimensions. This is the first time such options have been made standard.

Where quiet running is required a noise reduced brake disc can be selected. This has a special coating to the axial splines that prevents rattle. Extra-long service life can be achieved with a low wear option that delivers the same torques as the standard brake disc but with a limit on the maximum energy. A high-torque option gives +60 per cent or more torque, suitable for holding brakes or where extra torque is needed with compact dimensions. Where the machine is such that the brake cannot be bedded-in, a "no running-in' option can be chosen.

The INTORQ BFK470 is proven under the temperature extremes required for wind turbines. A cold climate version is rated from -40 to +50degC and high-temperature brake discs can be specified where the friction energy is high. INTORQ brakes are available in the UK through the Techdrives division of Lenze Ltd, www.techdrives.co.uk.