NORD DRIVESYSTEMS at inter airport Europe 2021

Drive specialist to present latest products, drive concepts and modern solutions for airport of future

From 9 to 12 November 2021, the international airport industry meets at the 23rd inter airport Europe in Munich. NORD DRIVESYSTEMS, the drive specialist from Northern Germany, will be there on Stand 1538, presenting its latest products, drive concepts and modern solutions for the airport of the future.

Baggage handling systems’ operators must reconcile various requirements. In addition to smooth operation, these are primarily energy efficiency, cost pressure, maintainability and flexibility. NORD DRIVESYSTEMS, as one of the world’s leading full-service providers of mechanical and electronic drive technology, offers “reliable and efficient solutions for each application in baggage handling systems – from check-in to sorting and from high-speed transport to baggage reclaim”.

Energy efficiency at new level

Concerning energy efficiency, the IE5+ synchronous motor and the new DuoDrive geared motor are of particular interest. With its IE5+ synchronous motor, NORD has already been able to significantly reduce losses, compared to the current IE4 series, it reports.

“The patent-pending DuoDrive goes one step further and sets new standards with regard to performance, installation space and version reduction. At up to 92%, it offers one of the highest geared motor efficiencies on the market for this power class, and also achieves very high systems efficiency in the partial load range. It is thus future-proof and a real cost reducer. This was achieved by completely integrating the IE5+ synchronous motor into a single-stage helical gear unit – a completely new approach in geared motor design.”

Frequency inverters with high functionality and economic efficiency

In the frequency inverter field, the NORDAC ON is another new NORD product. The smart inverter for decentralised use was specifically developed for interaction with the new IE5+ synchronous motor, and is characterised by an integrated Ethernet interface, full pluggability and a very compact design. “Whether for ProfiNet, EtherNet/IP or EtherCAT, the required protocol can be easily set via parameters. Thanks to standardisation, the NORDAC ON also ensures high economic efficiency.”

NORD will also present its NORDAC LINK field distribution system at inter airport Europe 2021. The drive control for flexible close-to-the-motor installation is available as a frequency inverter (up to 7.5 kW) or as a motor starter (up to 3 kW), flexible in configuration and function, freely configurable according to requirements and application, and compatible with all common bus systems. All NORD frequency inverters have a high-performance PLC for functions close to the drive.

Service via app for mobile use

NORD’s NORDCON APP and the NORDAC ACCESS BT Bluetooth stick provide a modern and mobile solution for monitoring, analysis and parameterisation of its drive systems. The dashboard-based visualisation can be used for drive monitoring and fault diagnosis.

“With a help function and rapid access to parameters, parameterisation of drive units is simple and easy,” states NORD. In stand-alone operation, the NORDAC ACCESS BT can also be used for backup and recovery of drive parameters.

The new NORDAC ON from NORD DRIVESYSTEMS is a compact and smart frequency inverter for decentralised use. (Image: NORD DRIVESYSTEMS)
The new NORDAC ON from NORD DRIVESYSTEMS is a compact and smart frequency inverter for decentralised use. (Image: NORD DRIVESYSTEMS)
The DuoDrive geared motor from NORD completely integrates the IE5+ synchronous motor into a single-stage helical gear unit housing. (Image: NORD DRIVESYSTEMS)
The DuoDrive geared motor from NORD completely integrates the IE5+ synchronous motor into a single-stage helical gear unit housing. (Image: NORD DRIVESYSTEMS)
The new NORD DRIVESYSTEMS’ IE5+ motor generation is said to have considerably lower losses, compared to the current IE4 series. (Image: NORD DRIVESYSTEMS)
The new NORD DRIVESYSTEMS’ IE5+ motor generation is said to have considerably lower losses, compared to the current IE4 series. (Image: NORD DRIVESYSTEMS)

Nord Gear Ltd

11 Barton Lane
Abingdon Science Park
Abingdon
OX14 3NB
UNITED KINGDOM

+44 (0)1235 534404

GB-sales@nord.com

www.nord.com

More from Nord Gear Ltd

Energy efficiency: optimal drive concepts make key contribution

Posted 3 weeks ago

Frequency inverter promises high-flying outcomes

Posted 1 month ago

Drive technology for decentralised stand-alone applications

Posted 2 months ago

MAXXDRIVE industrial gear units – NORD’s ‘toughest’

Posted 4 months ago

Technical innovation enhances mixing and agitation processes

Posted 5 months ago

Driving towards its goals at NORD DRIVESYSTEMS

Posted 5 months ago

Synchronous motors aim to set new standards

Posted 5 months ago

Getting the right mix

Posted 6 months ago

Virtually there, at trade fair

Posted 7 months ago

Motor tuned in to setting new standards

Posted 7 months ago

The drive towards optimal protection

Posted 9 months ago

NORD Drivesystems website relaunched

Posted 10 months ago

Just the gear to drive powerful conveyor belts

Posted 1 year ago

White paper: Corrosion protection for high loads

Posted 1 year ago

New control cabinet inverters from Nord Drive Systems

Posted 1 year ago

Drive solutions for the bakery industry

Posted 1 year ago

Industrial gear units for heavy-duty applications

Posted 1 year ago

Motor efficiency at a new level - news from Nord Drive Systems

Posted 1 year ago

Technical innovation in mixing and agitation processes

Posted 1 year ago

Nord invests in new product development and facilities

Posted 1 year ago

Nord guarantees product availability during COVID-19 crisis

Posted 1 year ago

Energy efficiency, reduced number of variants for intralogistics

Posted 1 year ago

Nord inverter drive includes multi-protocol Ethernet port

Posted 1 year ago

Comprehensive range of frequency inverters rated 0.25-160kW

Posted 1 year ago

Nord Universal Motor with power ratings from 0.12kW to 45kW

Posted 1 year ago

Nord now shipping IE5+ synchronous motors

Posted 1 year ago

Heavy-duty drives that meet the needs of plastic extrusion

Posted 1 year ago

See Nord's intelligent drive systems and much more at Hanover

Posted 1 year ago

LogiDrive combines energy efficiency and reduction of variants

Posted 1 year ago

See Nord Drivesystems' latest products at LogiMAT 2020

Posted 1 year ago

Nord optimises design of IE3 asynchronous motors

Posted 1 year ago

Condition monitoring for predictive maintenance concepts

Posted 1 year ago

Nord launches high-efficiency IE5+ synchronous motor

Posted 1 year ago

See Nord Drivesystems' latest products at BrauBeviale 2019

Posted 1 year ago

Frequency inverter incorporates condition monitoring

Posted 1 year ago

Nord to unveil new products at SPS smart production solutions

Posted 2 years ago

Nord Drivesystems to unveil new products at FMB 2019

Posted 2 years ago

Nord Drivesystems at BrauBeviale 2019

Posted 2 years ago

Nord launches Universal Motors with powers from 0.12 to 45kW

Posted 2 years ago

Innovative drive systems for Industry 4.0 smart factories

Posted 2 years ago

myNORD customer portal speeds drive selection

Posted 2 years ago

Drive units designed for continuous conveyors

Posted 2 years ago

Easier drive commissioning, adjustment, monitoring and servicing

Posted 2 years ago

See Nord at ProPak Asia in Bangkok, Thailand

Posted 2 years ago

Decentralised drives for Industry 4.0 factories

Posted 2 years ago

Drives for continuous conveyors

Posted 2 years ago

Maxxdrive XT industrial gear units rated from 15 to 75kNm

Posted 2 years ago

New frequency inverter from NORD: versatile, networked, powerful

Posted 2 years ago

Nord demonstrates intelligent drives at SMART Automation

Posted 2 years ago

Hygienic aluminium drives: economical and corrosion resistant

Posted 2 years ago

New single-stage Nordbloc.1 helical gear units from Nord

Posted 2 years ago

Nord drive units for efficient bulk material handling at Bauma

Posted 2 years ago

See new Nord gear units, inverters and maintenance technologies

Posted 2 years ago

See Nord products and systems at Passenger Terminal Expo 2019

Posted 2 years ago

Nord Drivesystems at the Tire Technology 2019

Posted 2 years ago

Nord at LogiMAT 2019: more flexibility for intralogistics

Posted 2 years ago

Nord Drivesystems launches size 71 smooth body motors

Posted 2 years ago

Gear units with nsd tupH anti-corrosion treatment

Posted 2 years ago

See decentralised drive technology for the digital factory

Posted 2 years ago

Nord launches robust, ATEX-compliant frequency inverter

Posted 3 years ago

New Nordbloc.1 bevel gear units for torques up to 50Nm

Posted 3 years ago

Nord Maxxdrive industrial gear units for heavy-duty applications

Posted 3 years ago

ATEX-compliant drive products from Nord

Posted 3 years ago

See food-grade drive units for the bakery industry at iba 2018

Posted 3 years ago

Decentralised frequency inverters for synchronised movement

Posted 3 years ago

How industrial gear units benefit from predictive maintenance

Posted 3 years ago

Optimise drive system costs and increase efficiency

Posted 3 years ago

Helical worm gear unit made from high-strength aluminium alloy

Posted 3 years ago

Drive systems with reinforced bearings for agitators and pumps

Posted 3 years ago

Nordac Link: intelligent drives for distributed control

Posted 3 years ago

Nord increases capacity for production of Nordac Link

Posted 3 years ago

PROFIsafe module for drive-based safe motion control

Posted 3 years ago

Configurable and flexible drive technology from Nord

Posted 3 years ago

Nord DriveSystems at the Hannover Fair 2018

Posted 3 years ago

Geared motors are corrosion-resistant for shellfish processing

Posted 3 years ago

Introducing Nord Drivesystems' myNORD customer portal

Posted 3 years ago

NORD DRIVESYSTEMS at LogiMAT 2018

Posted 3 years ago

Exhibition premier: NORD at Tire Technology 2018

Posted 3 years ago

Virtual sensors enable drives to monitor machine condition

Posted 3 years ago

Integrated drive speeds up assembly of rebar bending machines

Posted 3 years ago

Nord Drivesystems at CBST 2017 in China

Posted 3 years ago

Preferred configurations reduce TCO for logistics drives by 70%

Posted 4 years ago

NORD wins Vanderlande Supplier Award

Posted 4 years ago

Highly efficient and hygienic: IE4 smooth-surface motors

Posted 4 years ago

Seaworthy drives make marine engineering easier

Posted 4 years ago

Long-life, wash-down drive technology for the beverage industry

Posted 4 years ago

Highly efficient and hygienic: IE4 smooth-surface motors

Posted 4 years ago

Fully integrated drive packages to power parcel distribution

Posted 4 years ago

Robust drive systems improve beverage sector production

Posted 4 years ago

NORD Drivesystems at LogiMAT China 2017

Posted 4 years ago

NORD Gear Ltd launches online product and CAD file configurator

Posted 4 years ago

Hoist drives rise to the challenge

Posted 4 years ago

LogiDrive: efficient drives with a small line-up of variants

Posted 4 years ago

Industrial gear units with extruder flanges

Posted 4 years ago

Drive data in the cloud

Posted 4 years ago

More powerful conveyor drives forthcoming from NORD

Posted 4 years ago

Modular industrial gear units in additional sizes

Posted 4 years ago

NORD motors are IE3 or better, exceeding new legal requirements

Posted 4 years ago

PROFIsafe module for drive electronics

Posted 4 years ago

Flexible and safe configuration: Nord's explosion-proof motors

Posted 4 years ago

Application flyer: 'Drive Solutions for Rotary Feeders'

Posted 5 years ago

Smart drive resolves blockages on its own

Posted 5 years ago

Nord drives: condition monitoring and predictive maintenance

Posted 5 years ago

Robust single-stage helical inline gears for pumps, fans, mixers

Posted 5 years ago

AC vector drives ULC certified for the Canadian market

Posted 5 years ago

Industrial gear units with output torques from 25kNm to 250kNm

Posted 5 years ago

New two-stage helical bevel gearboxes from Nord

Posted 5 years ago

Nord Drivesystems at Drives & Controls Show 2016

Posted 5 years ago

Demo for materials handling industries at Drives & Controls

Posted 5 years ago

Servo performance from frequency inverters and geared motors

Posted 5 years ago

New heart beating in all Nord inverters

Posted 5 years ago

Two-stage helical bevel gearboxes with output torques up to 50Nm

Posted 5 years ago

NORD 4.0 READY: drive technology in the age of IIoT

Posted 5 years ago

Think small, but think green: IE3 motors from 0.12kW

Posted 5 years ago

Intelligent inverters with built-in PLC for motors or cabinets

Posted 6 years ago

NORD drive systems for the steel industry

Posted 6 years ago

nsd tupH surface protection for cost-effective drive protection

Posted 6 years ago

NORD drives pass series of tests according to EN 50598-2

Posted 6 years ago

Drives for process technology applications

Posted 6 years ago

Heavy-duty drives for the metals industry: Nord at METEC 2015

Posted 6 years ago

Nord Drivesystems celebrates anniversary at Hannover Messe 2015

Posted 6 years ago

NORD geared motors have surface treatment for salty environment

Posted 6 years ago

Customised option for crane drive synchronisation

Posted 6 years ago

Effective corrosion protection for aluminium drives: nsd tupH

Posted 6 years ago

Easing the transition from IE2 to IE3 energy-efficient motors

Posted 7 years ago

Intelligent IP69K drives from NORD for pumps and conveyors

Posted 7 years ago

Conveyor drives and gear units in single-piece housings

Posted 7 years ago

Microsite food.nord.com is optimised for mobile devices

Posted 7 years ago

Robust geared motors for steel mills

Posted 7 years ago

Energy-efficient distributed pump drives from Nord Drivesystems

Posted 7 years ago

Wear-free decentralised soft starter and reversing starter

Posted 7 years ago

New motor-mounted inverter for simple drive applications

Posted 7 years ago

More frequency inverter communications options from Nord

Posted 8 years ago

Nord solutions for the extended energy-efficiency directive

Posted 8 years ago

Hygienic smooth-surface motors from Nord

Posted 8 years ago

High-efficiency helical bevel gear units for high hygiene

Posted 8 years ago

Compact and durable SMI series worm gear units from Nord

Posted 8 years ago

Nord Drivesystems UK gains ISO14001: 2004 accreditation

Posted 8 years ago

Geared motors with a smart head for positioning tasks

Posted 8 years ago

New drive surface protection catalogue from Nord

Posted 8 years ago

Industrial gear unit range now covers 25 kNm to 242 kNm

Posted 8 years ago

NORD expands geared motor same-day assembly service

Posted 8 years ago

SK 200E inverter series provides certified safety up to SIL3

Posted 9 years ago

Industrial Ethernet interfaces for SK 200E series

Posted 9 years ago

SK200E distributed inverter series covers wide application range

Posted 9 years ago

Distributed frequency inverters equipped with a system bus

Posted 9 years ago

New washdown versions of Nord's helical bevel gear units

Posted 9 years ago

SK 200E inverter series for distributed applications

Posted 9 years ago

NSD tupH sealed surface protection system gives a robust finish

Posted 9 years ago

Nord's SK 200E decentralised inverters now up to 22kW

Posted 9 years ago

Separation technology: reliable drives for the food industry

Posted 9 years ago

Helical shaft gear units are more reliable in extreme conditions

Posted 9 years ago

SK 540E intelligent inverter controls synchronous motors

Posted 9 years ago

Combined motor/drive technologies cut energy consumption

Posted 9 years ago

Low-cost motor-mounted inverters with 24V control input

Posted 10 years ago

New brochure presents options for SK 500E frequency inverters

Posted 10 years ago

Decision tree aids selection of energy-efficient motors

Posted 10 years ago

New catalogue of asynchronous low-voltage motors

Posted 10 years ago

Technology boxes connect frequency inverters to Profinet

Posted 10 years ago

Preview: easy-clean, two-stage helical bevel gear units

Posted 10 years ago

Inverters add PLC capability to PID, servo and position control

Posted 10 years ago

New size of SK 500E series cabinet-mounted frequency inverters

Posted 10 years ago

Distributed drives simplify conveyor control

Posted 10 years ago

High-torque industrial gears in unicase housings

Posted 10 years ago

IE2 motors with outputs from 0.55kW and above

Posted 10 years ago

Motors and drives for metal processing machinery

Posted 10 years ago

Nord EtherCAT box connects multiple inverters to one cable

Posted 10 years ago

Same-day assembly and despatch for Nordbloc.1 gearmotors

Posted 11 years ago

Compact inverters with interfacing options and expansion modules

Posted 11 years ago

New anti-fretting surface treatment for hollow drive shafts

Posted 12 years ago

Sensorless vector drives with control and communications

Posted 12 years ago

NORDBLOC.1 helical gear motors built in four hours

Posted 12 years ago

Decentralised automation benefits from field distributor modules

Posted 12 years ago

High-power gearboxes handle torques up to 200,000Nm

Posted 13 years ago

High-reliability worm gears fit standard IEC motors

Posted 13 years ago

Posicon inverter drives include position control functions

Posted 13 years ago

Two-stage helical-bevel gearboxes save weight and cost

Posted 13 years ago

Compact frequency inverters handle 200 per cent overload

Posted 13 years ago

More news

Login / Sign up