NSK in-wheel motor charges wirelessly while in motion

NSK has developed the third generation of its in-wheel motor, the world's first design of its type to feature a complete package comprising motor, inverter and wireless charging unit. The innovative wireless in-wheel motor (W-IWM) for the electric vehicle (EV) market is capable of charging from coils embedded in the road, while in motion. Development of the latest unit was conducted jointly by a research group comprising NSK, the Fujimoto Laboratory at the University of Tokyo's Graduate School of Frontier Sciences, Bridgestone Corporation, ROHM Co Ltd and Toyo Electric Mfg Co Ltd.

Reducing CO2 emissions in order to achieve a low-carbon society is a global challenge that calls strongly for reductions in automobile emissions, hence the growing development and take-up of EVs. However, some concerns have been raised regarding the convenience of stationary EV charging and the amount of resources required to produce large amounts of battery cells. Efficient running with a minimal amount of battery cells is therefore required for the sustainable spread of EVs. As a result, wireless charging while in motion has been capturing the attention of OEMs keen on realising EVs with small batteries.

The third-generation W-IWM developed by the joint research group has vastly improved in-motion charging capability, motor performance and ease of mounting, bringing together the features required for practical application.

Importantly, the W-IWM has been developed so that the in-motion wireless power receiver circuit, as well as the EV's driving mechanism (motor and inverter), fit entirely inside the wheel.

In terms of motor performance, compared with the second-generation W-IWM for light vehicles announced in 2017 (12kW per wheel), the third-generation W-IWM has been created for use in larger passenger cars (25kW per wheel). Furthermore, while the second-generation W-IWM offered an in-motion charging capacity of 10kW per wheel, the third-generation unit sees this performance climb to 20kW.

The relevance of these improvements are linked to the future emergence of smart cities, where the installation of in-motion wireless charging systems in the road surface (even if only at traffic signals), will see EV drivers travel without having to worry about charging, considerably increasing convenience. Based on this thinking, NSK is currently looking into the potential for in-motion charging infrastructure by analysing public road traffic data and conducting simulations.

In order to take advantage of open innovation and accelerate the practical implementation of the in-motion wireless charging system, the joint research group has agreed to leave open the basic patents associated with this project.

While the research group is currently in the process of testing and evaluating the third-generation W-IWM, it will eagerly push towards prototyping the subsequent generation unit, which will incorporate yet more new ideas. The group will integrate not only the expertise of current project members, but a wide range of knowledge from various fields held by other organisations and companies. The aim is to enter the verification phase for the real-world testing of an in-motion wireless charging system by 2025.

Through this joint research project, NSK ultimately hopes to contribute to the realisation of a more sustainable society, and make advancements that help create new momentum within the automotive industry.

Learn more about the wireless in-wheel motor at www.nskeurope.com.

NSK UK Ltd

European Bearings Business Unit
Northern Road
Newark
NG24 2JF
UNITED KINGDOM

+44 (0)1636 605123

info-uk@nsk.com

www.nskeurope.com

More from NSK UK Ltd

Counterfeit bearings – NSK continues the fight against the fakes

Posted 2 days ago

New-generation bullet train runs on NSK bearings

Posted 1 week ago

Extended linear guide service life highlighted by NSK

Posted 2 weeks ago

NSK publishes new bearings catalogue for electric motors

Posted 2 weeks ago

How to identify and avoid purchasing fake NSK bearings

Posted 2 weeks ago

Cash-flow support programme for NSK linear motion products

Posted 3 weeks ago

NSK develops ultra-high-speed ball bearings for EV motors

Posted 1 month ago

New Precision Machine Components catalogue from NSK

Posted 1 month ago

New NSK heat treatment plant protects supply chains

Posted 1 month ago

Recycling plant saves €50,000+ p.a. with NSK mounted bearings

Posted 2 months ago

NSK verification app upgraded to include industrial bearings

Posted 2 months ago

NSK TL bearings double service life in papermaking machinery

Posted 3 months ago

Counterfeit bearings - know the risks

Posted 3 months ago

NSK bearings save nearly €3 million at steel mill

Posted 4 months ago

New online training for food and beverage bearing applications

Posted 5 months ago

Switching to NSK bearings helps manufacturer save EUR100,000 p/a

Posted 5 months ago

NSK bearings save soft drinks producer over EUR10,000 per year

Posted 6 months ago

Direct-drive wheel unit designed for low-noise mobile robots

Posted 6 months ago

NSK endorses recommendations in TCFD report on climate change

Posted 7 months ago

NSK bearings and training save machine builder over EUR13,000

Posted 7 months ago

New online training module for vibrating screens

Posted 7 months ago

NSK ball screws for electric-hydraulic braking systems

Posted 7 months ago

NSK lubrication units save roof tile plant EUR4950 per year

Posted 8 months ago

Bearings withstand shock and vibration at woodworking plant

Posted 8 months ago

NSK wins Monozukuri Award or its DIN-standard ball screw

Posted 9 months ago

Switching to NSK bearings on milling machine saves EUR35,600 pa

Posted 9 months ago

NSK bearings save steelworks EUR372,555 per annum

Posted 10 months ago

NSK appoints MCA as authorised distributor

Posted 10 months ago

Lubrication unit improves performance of linear guides

Posted 10 months ago

Lubrication units improve reliability for cereal manufacturer

Posted 10 months ago

NSK ball screws incorporated in electric press brakes

Posted 11 months ago

NSK appoints Rubix Haarlem as Certified AIP Service Branch

Posted 11 months ago

NSK launches new app to combat counterfeiting

Posted 11 months ago

DELBA Electrical named first NSK Certified Workshop

Posted 11 months ago

NSK European Distributor Convention takes place in Dubrovnik

Posted 11 months ago

NSK Europe Ltd appoints Dr Ulrich Nass as new CEO

Posted 1 year ago

New housed bearings and custom rolling bearings at Agritechnica

Posted 1 year ago

NSK linear roller guides benefit from enhanced seals

Posted 1 year ago

Longer-life four-row tapered roller bearings for rolling mills

Posted 1 year ago

Spindle bearings for high-speed, high-precision machine tools

Posted 1 year ago

Precision ball screws with three times longer life

Posted 1 year ago

New ball screws with interchangeable nut-shaft combinations

Posted 1 year ago

New deep-groove ball bearings boost electric motor efficiency

Posted 1 year ago

NSK Click!Speedy simplifies specification of linear guides

Posted 1 year ago

NSK appoints Coroll as Certified AIP Partner in Czech Republic

Posted 1 year ago

NSK unveil ball screws, bearings and linear guides at EMO 2019

Posted 1 year ago

NSK catalogue details high-speed DIN-standard ball screws

Posted 1 year ago

Ball screws for servo-electric actuators in powder presses

Posted 1 year ago

Molded-Oil bearings extend conveyor service life in food plant

Posted 1 year ago

Bespoke ball screws used for moving large injection mould tools

Posted 1 year ago

Online Calculation Tools predict savings from using NSK bearings

Posted 1 year ago

NSK Europe appoints Dr Ulrich Nass as Chief Operating Officer

Posted 1 year ago

Pizza manufacturer makes significant savings with NSK bearings

Posted 1 year ago

NSK online training module focuses on jaw crusher bearings

Posted 1 year ago

Switching to NSK bearings saves EUR400,000 for ore plant

Posted 1 year ago

NSK solves conveyor failure issues at drinks plant

Posted 1 year ago

Root cause analysis aids development of new bearing materials

Posted 1 year ago

Switching to NSK linear guides gives nine-times longer life

Posted 1 year ago

Cylindrical roller bearings for continuous casting machines

Posted 1 year ago

Switching to NSK high-performance bearings saves EUR140,000

Posted 1 year ago

NSK high-capacity angular contact ball bearings for longer life

Posted 1 year ago

NSK opens training centres and announces new course programme

Posted 1 year ago

Bearing designs to enhance performance of offshore wind turbines

Posted 1 year ago

Optimise bearings to avoid production downtime

Posted 2 years ago

Condition monitoring for bearings improves grinding process

Posted 2 years ago

Correct installation prevents premature bearing failure

Posted 2 years ago

NSK appoints APRB Center in Moscow as new Certified AIP Partner

Posted 2 years ago

Condition Monitoring Service saves pump manufacturer EUR34,500

Posted 2 years ago

NSK Needle Bearing Poland presented with Toyota Supplier Award

Posted 2 years ago

Switching to NSK bearings saves energy plant EUR134,000 per year

Posted 2 years ago

NSK Molded-Oil bearings offer long life at food plants

Posted 2 years ago

NSK solves repeat failures of machine tool spindle bearings

Posted 2 years ago

Learn about mechanical tools for bearings at NSK academy

Posted 2 years ago

Induction heater tutorial added to NSK academy

Posted 2 years ago

New pump bearings save EUR28,970 per annum at energy plant

Posted 2 years ago

NSK academy hosts LAS-Set tutorial module

Posted 2 years ago

How materials and surface treatments improve bearing reliability

Posted 2 years ago

NSK launches world's fastest high-load ball screws

Posted 2 years ago

Moulding machine OEM opts for NSK's NH linear guides

Posted 2 years ago

NSK's new S-HTF ball screws made of 'Tough Steel'

Posted 3 years ago

NSK Linear Guides solve pick-and-place machine problems

Posted 3 years ago

A new type of roller bearing for continuous casting machines

Posted 3 years ago

NSK's NH/NS Linear Guides win Cho Monozukuri Award

Posted 3 years ago

NSK ball screws replace hydraulics in powder presses

Posted 3 years ago

NSK expands production at Kielce plant

Posted 3 years ago

Stress-free troubleshooting with NSK 's Bearing Doctor App

Posted 3 years ago

Optimising bearing seals for agricultural applications

Posted 3 years ago

NSK bearings for ball screw drives offer high load factors

Posted 3 years ago

NSK Agri Disc Hub units fitted to disc harrows

Posted 3 years ago

NSK Europe is launching the NSK academy online training platform

Posted 3 years ago

NSK launches new bearing care products as part of AIP+

Posted 3 years ago

NSKHPS range includes large cylindrical roller bearings

Posted 3 years ago

Laser alignment tools offered as part of NSK's AIP

Posted 4 years ago

Toughcarrier extends NSK's high load actuator portfolio

Posted 4 years ago

Machine shop saves EUR24,000 PA thanks to NSK spindle bearings

Posted 4 years ago

NSKHPS bearings offer high performance and long life

Posted 4 years ago

NSK expands size of high-load ball screw support bearings

Posted 4 years ago

NSK unveils AIP+ Added Value Programme

Posted 4 years ago

APTSURF high-precision cylindrical roller bearings from NSK

Posted 4 years ago

NSK celebrates 100 years of motion technologies

Posted 4 years ago

NSK offers bespoke products for papermaking sector

Posted 4 years ago

NSK Solutions App update adds even more value

Posted 4 years ago

NSK updates rolling bearings catalogue

Posted 5 years ago

NSK's high-speed, low-noise Ball Screw Generation II

Posted 5 years ago

NSK at EMO MILANO 2015

Posted 5 years ago

NSK bearings deliver large saving for fish processor

Posted 5 years ago

Expanded range of NSKHPS high-performance standard bearings

Posted 5 years ago

Bearings contamination identified through NSK's AIP analysis

Posted 5 years ago

NH and NS series linear guides offer higher dynamic load rating

Posted 5 years ago

Interview with Michael Preinerstorfer, NSK Europe

Posted 5 years ago

NSK bearings deliver EUR46k savings for steel plate rolling mill

Posted 5 years ago

NSK low-torque bearings improve energy efficiency in MRO sector

Posted 5 years ago

Bakery saves EUR27,000 per year thanks to NSK bearings

Posted 5 years ago

Powder presses: clear advantages thanks to new drive concept

Posted 5 years ago

NSK service: an introduction to bearings for non-experts

Posted 5 years ago

NSK wins award at Russian paper industry expo

Posted 5 years ago

New brochure for farm machinery bearings

Posted 5 years ago

Bearing design for electric motors

Posted 5 years ago

Apps for bearings to benefit end users

Posted 6 years ago

NSK at Innotrans - Successful premiere in Berlin

Posted 6 years ago

The AIP programme in machining

Posted 6 years ago

Watch Super Precision bearing manufacture at Newark UK factory

Posted 6 years ago

Bearings in agricultural machinery

Posted 6 years ago

YouTube channel demos new NSK products and plant tours

Posted 6 years ago

Michael Preinerstorfer MD for industrial business for NSK Europe

Posted 6 years ago

NSK guide: improving pump performance in mining and quarrying

Posted 6 years ago

Time for OEMs to check their sleeves

Posted 6 years ago

NSK extends the service life of its wheelset bearings

Posted 6 years ago

NSK NH and NS linear guides last twice as long as alternatives

Posted 6 years ago

NSK AIP Programme is set reduce operational costs

Posted 6 years ago

NSK launches Added Value Programme AIP for 2014

Posted 6 years ago

NSK cost-saving calculator app for tablets, smart phones and PCs

Posted 6 years ago

NSK's Molded-Oil bearings deliver savings for paper manufacturer

Posted 6 years ago

Unique 2D laser code provides traceability for NSK bearings

Posted 6 years ago

Selecting bearings for industrial gearboxes

Posted 6 years ago

New range of spherical roller bearings included in NSK guide

Posted 6 years ago

Traceability in bearing manufacture

Posted 6 years ago

Ultra-high-speed bearings are key to machine tool performance

Posted 7 years ago

How to achieve optimum bearing performance in gearboxes

Posted 7 years ago

Bearings in compressor and pump development: a guide

Posted 7 years ago

Energy efficient and longer life bearings for electric motors

Posted 7 years ago

Compact booklet helps with choosing bearings and ordering parts

Posted 7 years ago

Dr Jürgen Ackermann named new CEO of NSK Europe Ltd

Posted 7 years ago

NSK design & development programme improves bearing performance

Posted 7 years ago

Improving bearing life is key to reducing costs for cement plant

Posted 7 years ago

Performance improvements for NSK deep groove ball bearings

Posted 7 years ago

Bosch names NSK "˜Preferred Supplier'

Posted 7 years ago

Robustshot angular contact bearings deliver speeds over 3m dmn

Posted 7 years ago

New bearing designs keep the steel industry rolling

Posted 7 years ago

NSK boosts its business in emerging markets

Posted 7 years ago

NSK named supplier of the year by Franz Kessler GmbH

Posted 7 years ago

Free pocket guide for NSK SNN Series plummer blocks

Posted 7 years ago

Cost savings made through reduced annealing oven bearing usage

Posted 7 years ago

Bespoke bearings for energy-saving electric drives

Posted 7 years ago

Linear technology: bespoke products and green engineering

Posted 7 years ago

Current trends and development projects for wind turbine bearing

Posted 7 years ago

Heat-resistant deep-groove ball bearings slash costs

Posted 7 years ago

Low-torque bearings bring energy, efficiency & size savings

Posted 7 years ago

NSK to exhibit at JIMTOF 2012

Posted 8 years ago

High-performance angular-contact bearings with optimised design

Posted 8 years ago

Free technical publication for precision linear guides

Posted 8 years ago

Bearing cage technology improves screw compressor reliability

Posted 8 years ago

Asset improvement programme solves bearing contamination issue

Posted 8 years ago

Free brochure for bearings users in the cement industry

Posted 8 years ago

Asset improvement programme delivers savings for sludge press

Posted 8 years ago

Molded oil bearings deliver cost savings on machinery operation

Posted 8 years ago

NSK and Brammer offer interactive solutions to bearing problems

Posted 8 years ago

NSK publishes technical handbook 'Ball Bearing Units'

Posted 8 years ago

NSK launches Advanced Steel Industry Kit, a free production aid

Posted 8 years ago

NSK'S EP Steel saves money for steel industry Sendzimir Mill

Posted 8 years ago

Bearing technology critical for small wind turbine performance

Posted 8 years ago

Super-TF steel makes savings for cold rolling mill

Posted 8 years ago

NSK to show spherical roller bearings at Hillhead 2012

Posted 8 years ago

Making practical use of molded-oil bearings

Posted 8 years ago

Long-life lipped thrust race for severe lubrication conditions

Posted 8 years ago

High-reliability wheel bearings used in diesel hybrid vehicles

Posted 8 years ago

Robotic guide dog uses recognition and guidance technologies

Posted 8 years ago

Energy-saving bearings for high-efficiency motors

Posted 8 years ago

High-quality ball screws replace planetary roller screws

Posted 8 years ago

NSK adds MECHATROLINK driver unit to Megatorque motor range

Posted 8 years ago

Ultra high-speed ball bearings for motors and power generators

Posted 8 years ago

NSK expands range of bearings manufactured in UK

Posted 9 years ago

PH series linear guides are high-precision yet interchangeable

Posted 9 years ago

HMS series ball screws offer high performance and low noise

Posted 9 years ago

Spacea SJ series bearings for high temperatures and vacuums

Posted 9 years ago

EMM-VS Series cylindrical roller bearings for vibrating machines

Posted 9 years ago

New shielded, double-row angular contact ball bearings

Posted 9 years ago

Higher-specification bearings save EUR9000 per year

Posted 9 years ago

VS Series spherical roller bearings last twice as long

Posted 9 years ago

Hi-TF bearings help to prevent premature cement plant failures

Posted 9 years ago

Bearings and energy efficiency in machinery

Posted 9 years ago

Bearing optimisation in challenging environments

Posted 9 years ago

Molded Oil bearings save quarry EUR14,389 per year

Posted 9 years ago

Molded Oil bearings boost reliability of vegetable washer

Posted 9 years ago

HPS spherical roller bearings offered in larger sizes

Posted 10 years ago

Hybrid bearings for wind turbines at HUSUM WindEnergy

Posted 10 years ago

Upgraded bearings save manufacturer EUR38,400 per year

Posted 10 years ago

Uprated bearings reduce downtime in steelworks

Posted 10 years ago

All-in-one bearing units save cost on vibratory screens

Posted 10 years ago

NSK receives quality award from PSA

Posted 10 years ago

Shenyang NSK Precision Co Ltd established in China

Posted 10 years ago

Self-lube mounted bearing units benefit from improved seals

Posted 10 years ago

Free guide: Maintenance of Bearings

Posted 10 years ago

Free guide to selecting gearbox bearings

Posted 10 years ago

Bearing change eliminates premature seal failures

Posted 10 years ago

Bearings and grease together save EUR337,600

Posted 10 years ago

NSK units Bearings and Linear Products departments

Posted 10 years ago

Bearing recommendation saves EUR11,000 per year

Posted 10 years ago

Long-life, high-reliability bearings for centrifugal pumps

Posted 11 years ago

Novel ultra-high-speed hybrid angular-contact bearings

Posted 11 years ago

Triple-lip-sealed bearings achieve rapid pay-back

Posted 11 years ago

Low-torque, low-friction ball bearings for hybrid vehicles

Posted 11 years ago

Cost-savings for food processors and manufacturers

Posted 11 years ago

Tough, high-performance bearings for mining machinery

Posted 11 years ago

Spherical roller bearings offer better performance and life

Posted 11 years ago

Bearings combine benefits of stainless steel and moulded oil

Posted 11 years ago

NSK launches sealed-clean spherical roller bearings

Posted 11 years ago

NSK Europe launches new website

Posted 11 years ago

Life-Lube bearings are water- and chemical-resistant

Posted 11 years ago

Rolling bearings suit the needs of beverage production

Posted 11 years ago

Free Bearing Doctor helps to avoid production downtime

Posted 12 years ago

How to use housed bearing units to save costs

Posted 12 years ago

NSK Friendly Service - new opportunities for the disabled

Posted 12 years ago

Free guide to handling and mounting bearings

Posted 12 years ago

Micro-manipulation system boasts accuracy and efficiency

Posted 12 years ago

NSK offers free bearing replacement guide

Posted 12 years ago

How choosing the right lubricant can deliver huge savings

Posted 13 years ago

High-tech polymer cages improve machine tool bearings

Posted 13 years ago

Environmental considerations in relation to bearings

Posted 13 years ago

NSK invests to boost output by one-third

Posted 13 years ago

Pin-type bearing cages are six-times stronger

Posted 13 years ago

Water Tough (WTF) bearings last longer in the wet

Posted 13 years ago

Bearings deliver improved productivity in papermaking

Posted 13 years ago

Free guide to bearings for petrochemical applications

Posted 13 years ago

Molded Oil bearings cut cost of ownership on packaging machine

Posted 14 years ago

More products
2 hours ago
New vibration damper means no great shakes
Elesa has introduced a new range of AISI 316 stainless steel wire rope vibration dampers  
2 hours ago
Visit the Schaffner SPS Drives 2020 virtual exhibition stand
A digital exhibition of EMC/EMI filters for regenerative drive applications and more
1 day ago
High-quality UK made ABS power supply cases
13A Plug-in and In-line styles from BCL Enclosures includes flame-retardant ABS models
2 days ago
Variohm Group buys Phoenix America
Based in Fort Wayne, Indiana ,Phoenix offers a range of absolute and incremental encoders, together with speed and proximity sensors, custom moulded magnets and more
2 days ago
New chain configurator aids machine builders
Tsubaki's recently unveiled configurator can make specifying chain a whole lot quicker and easier
2 days ago
Parker launches new hydraulic fluid particle contamination monitor
The company’s icount LaserCM30 Particle Contamination Monitor is now available and can provide test results in 90 seconds
2 days ago
Last few places on Machinery Safety Course
Just a handful of places remain available on the last Pilz City & Guilds accredited Machinery Safety Course in 2020. Diary date is December 14th to 17th
3 days ago
Camozzi Automation launches new quick exhaust safety valves
Designed to provide a plug and play solution for OEMs that need to be compliant with Machinery Directive 2006/42/EC, Camozzi Automation says that its new quick exhaust 2-way safety valve range also complies with ISO 13849-1 covering the safe design of control systems which perform safety functions
3 days ago
SICK’s Open Service for IO-Link function blocks
A new open software service for control systems has been introduced by SICK
6 days ago
Automatic bearing lubrication brings ore inspiring results in mining
By installing automatic lubricators for bearings on its conveyor drive motors and belt pulleys, an opencast mine in Hungary has seen a range of benefits, including the prevention of unplanned downtime, longer bearing life and reduced repair work