The MicroE Systems OPS range of encoders, available in the UK through Inmoco, has been extended with the addition of a side mount sensor and new Performance and Value linear glass scales, which enables OPS to be used in applications requiring higher accuracies.
Easily installed, the side mount sensor can be used with a FlexFit Adaptor to mount directly into several industry-standard mounting hole patterns. This extends the range of possible applications in which the OPS can be used. The Performance and Value OPS encoder system is designed for applications where total cost of ownership is a design priority, yet advanced encoder system performance is required. Optical limits can be configured to reduce wiring, footprint, and system complexity.
OPS works with MicroE’s PurePrecision linear tape scales and a wide range of linear and rotary glass scales to achieve the right-price performance needed in your application. To ensure the easiest possible installation both the tape scales and the PVGL scales are mounted using adhesive backing, which is supplied as the standard option.
In short, says Inmoco, OPS features advanced encoder technology in multiple mounting configurations. The OPS-20 has a 1um resolution and can operate at linear speeds up to 4.5m/s. The OPS-40 has double the resolution, the OPS-200 offers 10 times the resolution at up to 3m/s, while the OPS-400 resolves to 50nm at 1.5m/s.
Linearity for an OPS tape scale is better than 5um per metre, and for a glass scale it is better than 3um. Resolution for rotary encoders in the OPS range varies from 163,000 counts per rev to 3,270,000cpr, while accuracy is 3.9 arc-sec with a 64mm scale.
The performance of the OPS units is enhanced with built-in interpolation, low cyclic errors, and jitter and low power consumption. Aware that installation is a key issue for many potential users, Inmoco highlights the OPS’s wide alignment tolerance, the 100 per cent optical index and limits that reduce cabling and footprint requirements, the flexibility in mounting configurations and the fact that the same senor is used whether the scale is tape or glass. OPS even has a simple but useful LED in the sensor, which indicates both correct alignment and system health.
To learn more about the MicroE Systems OPS range of encoders, please go to www.inmoco.co.uk.