Posted to News on 6th Oct 2014, 15:12
Panel feed-through aids installation of PushPull connectors
Harting is extending its established PushPull connector family with a new panel feed-through component in robust plastic for mounting the Han PushPull Power 4.0 connector in round panel cutouts with IP65/67 protection class. The round panel feed-throughs can be screwed into wall openings with M25 threads or mounted in circular wall openings with a diameter of 25mm.
Round panel feed-throughs offer decisive advantages in situations where existing devices require a quick and simple conversion of a (non-pluggable) cable entry into a pluggable energy supply entry, while at the same time avoiding mechanical reworking of the housing wall.
In addition, round panel feed-throughs with PushPull locking offer advantages where an additional interface is required for an existing housing. In many cases the production of a round wall cutout requires less work.
The Han PushPull Power 4.0 connector is suitable for power transfer at ratings of up to 690V and 16A. Wire gauges from 0.25mm ² to 2.5mm ² can be connected either without tools, using Harting's Han-Quick Lock rapid termination technique, or with crimp technology. Five contacts are available in each insulated insert.
These connectors can be coded without loss of poles, in order to avoid faulty mating or confusion between several connectors. Further accessories include IP65/67 protective caps.
Please follow the link to view the PushPull Power 4/0 Panel feed-through M25 datasheet.
