Parker Hannifin to show energy-efficient systems at HMI 2013

Parker Hannifin will present new systems, components and services for sustainable and competitive industrial production at Hannover Messe 2013. On Parker's exhibition stands visitors will find efficient and environmentally friendly innovations for all applications in hydraulics, pneumatics, electromechanical, filtration, fluid and gas handling, process control, sealing technology and EMI shielding.

For more productivity in diverse industrial applications, machines and processes Parker presents valves, pumps, filters, gaskets, hoses, controllers, motors, drives and controls, and other components and accessories. Parker's optimised, durable and resource-saving technologies, products and applications, industrial processes and maintenance offers customers tailor-made systems from a single source.

At the large outdoor area Parker will show its HOSE DOCTOR mobile emergency and repair service, the ParkerStore container and further services from the ParkerStore concept.

On show will be Parker's patented, electrically driven linear actuator series, the Origa ORD-E. This is a new series of linear actuators that stand out due to high forces, compact design, non-rotating technology and wide temperature range features which, together with an IP65 rating, make them suitable for applications with tough ambient conditions and where regular intensive cleaning and rinsing is required. From initial introduction to the market, the new ORD-E will be available in a 50mm size, with further sizes of 80mm, 100mm and 160mm following soon after. The ORD-E series has been designed to perform high-load linear movements with up to a 500mm maximum stroke length and with forces up to 2000N.

Parker offers a speed-controlled, hydraulic full-system solution that improves energy and cost efficiency with its drive controlled pump. Parker connects the electromechanical drive with hydraulics to give a speed-controlled, electrohydraulic full-system solution. For the composition and layout Parker uses an extensive construction kit of high-grade components that will be constantly expanded and thus always stay up to date. All components are precisely matched with one another and individually tailored to the cycle of the respective application using a newly developed piece of software. At the same time, the size of the components used can also be reduced. In doing so, Parker fulfils both current and future demands in terms of energy consumption and CO2 and noise emissions, as well as the wishes of machine manufacturers and users for more efficient systems.

Parker Racor has recently introduced the Parker Racor Super Impactor crankcase ventilation separator. As engine manufacturers are faced with demanding global legislation for the control of emissions, they are seeking approaches that will help them reduce Nitrous Oxide, hydrocarbon and particulate emissions. The Super Impactor has been specifically designed to meet these challenges and sets the standard for high performance fit-for-life closed crankcase ventilation systems.

Parker Hannifin's Filter Division has introduced a new fully self-contained bottle sampling system that provides fast, accurate and repeatable detection of contamination in hydraulic oils and hydrocarbon fuels. The icountBSplus Bottle Sampler uses sophisticated laser particle counting technology and features an intuitive, easy-to-use Windows-based user interface along with a range of other on-board functionality.

With the introduction of the new Antares compressed air dryer range, Parker's Hiross Zander Division is not simply introducing another new line of dryers for compressed air. Antares heralds the launch of a new compressed air purification technology, offering significant advantages with respect to efficiency, flexibility and lifetime cost.

The basis of Antares Tandem Technology, developed by Parker Hiross, is the combination of two well-proven technologies - refrigeration and adsorption drying - which have now been integrated in a new and intelligent manner.

For further information please go to www.parker.com/, or visit Parker at Hannover Messe 2013, 8-12 April, Hanover, Hall 23, Stand A50 (Motion, Drive & Automation); Hall 26, Stand B74 (ComVac); Open-air site, A14.

Parker Hannifin

Tachbrook Park Drive
Tachbrook Park
Warwick
CV34 6TU
UNITED KINGDOM

+44 (0)1926 317878

parker.uk@parker.com

www.parker.com/uk

More news
6 hours ago
What changes does the new machinery regulation bring?
As the machinery regulation replaces machinery directive 2006/42/EC, Dirk Meyer, specialist engineer solution architect at Eaton, looks at what is changing.
10 hours ago
Klüber Lubrication receives Schaeffler Supplier Award 2022
Schaeffler has awarded Klüber Lubrication with the Supplier Award 2022 in the field of quality. The jury emphasised in particular the global supplier's strong commitment to the compliance with quality standards.
13 hours ago
Essentra Components cuts energy usage by 15% globally
An innovative energy reduction initiative based on the concept of insulated jackets is helping industrial components manufacturer Essentra Components cut its energy usage when heating machine barrels by 15% and save CO2 emissions in the process.
1 day ago
Fluke addresses requirements to improve operational efficiencies
Rising energy costs and more stringent legislation guiding sustainable practices is spurring companies to re-evaluate processes and seek new tools and technologies to reduce waste and overcome challenges in today’s industrial environments.
4 days ago
7th axis robot in a welding application
An Igus 7th axis on a collaborative robot working alongside staff at German screening machine manufacturer Rhewum is helping to increase the workspace from 1300 to 5500mm.
4 days ago
Robust inductives position automotive workplace carriers on conveyor
An automotive manufacturer is relying extensively on the reliability of Contrinex’s robust and high-performance inductive sensors in the automated assembly of engines, where cylinder heads are transferred for mounting on the engine.
4 days ago
New Leuze plant in Malaysia begins operation
After a construction time of just 16 months, Leuze has opened its new production site in Malaysia. With immediate effect, Leuze sensors will be produced there for the international market.
4 days ago
Nord brings industry solutions to Drinktec trade fair
From 12 to 16 September 2022, the beverage and liquid food industry meets at the world leading drinktec trade fair in Munich. Nord Drivesystems will be presenting its solutions for the industry, which focus on energy efficiency and hygiene.
5 days ago
Stephenson Gobin celebrates 50 years
UK manufacturer Stephenson Gobin is celebrating 50 years in business, a milestone that shows its commitment to innovation in the motion control industry.
6 days ago
Join a free webinar on the smart factory journey
Ripley Solutions invites you to attend a free webinar, where solutions architect Paul Holding will talk you through the smart factory journey, a roadmap to connected manufacturing.

Login / Sign up