ICOP Technology is introducing a new rugged PC/104 Single Board Computer (SBC) with 1.0GHz dual-core DM&P Vortex86 DX3 processor and EtherCAT support for ISA bus-based industrial control technologies. The new ICOP Technology VDX3-6755 PC/104 SBC with 2GB DDR3 not only delivers full PC/104 compliance and native ISA bus support without bridges but also comprehensive support of the open EtherCAT standard for connected control automation technologies in real-time environments. OEMs benefit from increased return on investment by continued deployment of existing ISA bus-based applications for a further seven years.
To adapt field applications in harsh environments, the new ICOP Technology PC/104 SBC is equipped with one CAN 2.0 bus module and two RS-232 interfaces that are fully isolated against overvoltage of up to 2.5kV for both power and signal lines. The RS485 is protected against electro static discharge (ESD) of +/-15kV. Even the two USB ports and PS/2 keyboard/mouse are 2.5kV surge protected. In addition, it fully supports the extended temperature range from -20 to + 70degC.
The DM&P Vortex86 DX3 integrated GPU delivers powerful graphics and supports full HD resolution of 1920x1080 at 60Hz dual display for VGA and 24-bit LVDS as well as optional video capture functionalities. This makes the new PC/104 board also suitable for cost-effective vision system designs in pick-and-place and inspection applications.
For Ethernet and EtherCAT connectivity, the PC/104 VDX3-6755 SBC is equipped with one Gigabit LAN based on the RTL8111F PCIe LAN chip, and one processor integrated R6040 10/100Mbps LAN supporting the Acontis EtherCAT Master Stack for real-time Linux and DOS.
The ICOP Technology PC/104 SBC supports a wide range of operating systems - from DOS to Windows CE6.0, CE7.0, Windows 7, WES7, Windows XP Professional, Windows Embedded Standard (XPe), POS Ready (WePOS) and Embedded Linux, X-Linux and Linux right up to QNX (BSP), VxWorks (BSP) and FreeBSD. The ICOP Technology VDX3-6755 CPU board is available now.
ICOP also provides new ETX Computer-on-Modules based on new Vortex86DX3 SoC which support legacy applications and are long-term available. For more information on the new PC/104 and ETX SBC based on Vortrex86DX3 SoC, go to www.icoptech.com.
60325 Frankfurt am Main
+49 (0)69 2475 687 0