PCB-based options are mighty minis for motor control

If you're looking for high-performance control of DC brushed, brushless and stepper motors across multiple axes, the typical enclosed DIN-rail mounting box might be your first thought. But INMOCO's Gerard Bush argues that in many general purpose automation applications, as well as in areas such as life sciences equipment, scientific automation and robotics, PCB motion cards, amplifiers and motion/amplifiers might well provide a better option.

Parallel developments in machine automation in recent years have seen a rise in the uptake of servo technology. On one side of the equation is the growing need for increased machine performance, in terms of factors such as speed, accuracy, flexibility and reliability. Balancing the equation have been developments in servo technology, with modern servos being both affordable and easy to program.

Of course it was not always thus. It is only in the last few years that servo technology has been a truly affordable option, opening up the possibility for its use on multiple axes around a machine rather than just one or two highly specialised aspects where nothing else could really do the job. At the same time, it is only relatively recently that programming servo systems has become a mainstream automation task, rather than the sole preserve of specialists. Servo technology has broken free from the legacy of its "˜black arts' past, and is now usable by the masses.

Combined with modern motion controllers, modern servo systems can eliminate mechanical devices such as gears, cams and shafts from machinery for vastly increased flexibility and improved accuracy. Where modern machines may have to work with multiple products of different shapes and sizes, servo systems enable complete machine changeovers at the touch of a button, significantly reducing machine downtime.

Few would argue with the potential increase in reliability, either. This is not to say that mechanical components are inherently unreliable, but there will always be issues of wear - both natural lifetime wear and catastrophic wear due to problems, for example, with misalignment or incorrect setup - and maintenance.

Where speed and accuracy are important (and where are they not important?), servo systems are unsurpassed, synchronising multiple axes to the highest levels of resolution.

When we think about employing servo technology on a machine, the first thought may well be one of the popular DIN-rail mounting servo amplifiers coupled to a dedicated DIN-rail mounting or PLC backplane-mounting motion controller. And indeed, in performance terms, these will do an excellent job for you. But are they always the best option? And what are the alternatives?

Highly specialised tasks

It was once accepted to talk about enclosed motion and drive systems (of the type just described) and OEM motion and drive systems, with the OEM system essentially providing you with a populated PCB forming the controller. This enabled you to put the control exactly where you needed it on a machine, and program it to perform highly specialised tasks.

The problems with this OEM approach, though, were twofold. First were the low powers available to those early OEM systems, and the second was the difficultly in programming, which again was the realm of a specialist. Certainly, it was not regarded as a mass market technology option.

But single chip and PCB-based servo technology has ridden the same development curve as its enclosed servo brethren, and these discrete servo systems are now programmed with the same style of Windows-based software as the more visible, cabinet mounted controllers.

What about power, though? Today, single axis motor amplifier ICs can easily give you 4A in current or 150W output power, providing an attractive option on a whole range of motion axes. Higher up the scale, amplifiers built from discrete components will enable you to drive 1000W or even many kilowatts from a single, highly compact PCB. And providing even greater flexibility, high-power, highly flexible controller amplifiers are also available on the smallest of boards, enabling high levels of servo control to be added anywhere on just about any machine.

Compact, affordable and easy to program, these PCB systems open up whole new possibilities in servo control, while on-board network interfaces to all of the popular technologies mean integration is as easy as it is with the typical enclosed offerings. And while a typical enclosed servo drive or motion system may mean paying for functions you are never going to use, the PCB-based mighty minis deliver only the control you want, exactly where you need it.

Off-the-shelf products

Importantly, these PCB systems are no longer niche technologies only to be considered in specialist areas of application. They are developed and marketed as off-the-shelf products in exactly the same way as the more familiar servos, but without the overheads of increased cost and unused functionality. Daventry-based INMOCO, for example, offers a complete range of motion cards developed by Performance Motion Devices.

Controlling the torque, velocity and position of DC brushed, brushless and stepper motors, they offer all the required motion profiles for even the most demanding systems, including S-curve, trapezoidal, velocity contouring and electronic gearing, combining convenience with space and cost savings. With multiple channels of analogue and digital I/O, plus communications options such as Ethernet, CANbus, RS232 and RS485 and the flexibility of Windows-based programming, these motion cards and amplifiers open up the possibilities for servo integration into a whole host of machine and OEM product designs.

So next time you look at a servo system for a machine or product, ask yourself whether the typical enclosed, DIN-rail mounting box is the right or best option. Because a PCB-based system may well deliver greater flexibility, lower cost and ultimately improved control of a greater number of aspects of the system. Go to www.inmoco.co.uk for further information.

Inmoco

4 Brunel Close
Drayton Fields
Daventry
NN11 8RB
UNITED KINGDOM

+44 (0)1327 307600

info@inmoco.co.uk

www.inmoco.co.uk

More from Inmoco

Miniaturisation in motion control

Posted 4 days ago

New compact actuators deliver high force

Posted 1 month ago

Pumping technologies for precise fluid handling

Posted 2 months ago

High force integrated actuator reduces footprint

Posted 7 months ago

Rod-style electric actuators deliver 222kN thrust

Posted 8 months ago

Smooth motion arc segments, 360-deg rotary direct-drive motors

Posted 9 months ago

Agility Series direct-drive motors feature zero cogging

Posted 10 months ago

Voice coil motors offer precision motion in compact package

Posted 11 months ago

Inductive angle encoders are simple, robust and ultra-precise

Posted 1 year ago

Servo systems cables with improved connectors and labelling

Posted 1 year ago

Low-voltage DC servo motors for high-performance machines

Posted 1 year ago

Inmoco offers alternatives for motors no longer available

Posted 1 year ago

What does the future hold for motion control?

Posted 1 year ago

Simple Co-Engineering options for Kollmorgen AKM 2G servo motors

Posted 1 year ago

New stepper motor controller from Inmoco

Posted 2 years ago

Next-generation servomotors raise machine performance

Posted 2 years ago

Next-generation servo motors deliver 30 per cent more torque

Posted 2 years ago

Component compatibility can make or break a good system

Posted 3 years ago

High-performance actuator range is compact and rugged

Posted 3 years ago

Helicopter actuators may also transfer to other applications

Posted 3 years ago

Miniature encoders help advance surgical robot capabilities

Posted 3 years ago

Compact actuators improve aircraft motion systems

Posted 3 years ago

Encoders step up to help miniaturise electronics

Posted 3 years ago

Linear actuator design enables automated maintenance

Posted 4 years ago

Advanced motion cards provide precise actuation

Posted 4 years ago

Compact DA series actuators deliver quality and reliability

Posted 4 years ago

DA99 linear roller screw actuators increase reliability

Posted 4 years ago

DA Series high-performance electric actuators

Posted 4 years ago

New high-performance actuators available in UK

Posted 4 years ago

Servo motor with Ethernet interface connects directly with CNCs

Posted 4 years ago

Heavy duty linear actuator has high-performance controls

Posted 4 years ago

Single cable, multi-axis servo systems gets more power

Posted 5 years ago

Precision motion chips for dedicated controllers

Posted 5 years ago

Hygienic motor range has new feedback and connector options

Posted 5 years ago

Inmoco launches KOLLMORGEN safety feedback option

Posted 5 years ago

MC58113 Series programmable motion control chips

Posted 5 years ago

MicroE Veratus Series encoders: smart and reliable

Posted 5 years ago

Smaller, smarter encoders from Inmoco

Posted 5 years ago

Servo controller doubles power

Posted 5 years ago

Maintenance-free linear motors delivery high power density

Posted 5 years ago

Vacuum-rated encoders from Inmoco

Posted 6 years ago

Minutes to motion - linear positioning explained

Posted 6 years ago

Servo users should not be seduced by power density alone

Posted 6 years ago

Inmoco introduces hygienic motor-gear combination

Posted 6 years ago

Servo technology is moving to a new paradigm

Posted 6 years ago

Compact washdown motor offers excellent performance

Posted 6 years ago

Maintenance-free lifting columns are easy to fit

Posted 6 years ago

Electric actuator optimises machine design and saves energy

Posted 6 years ago

Encoder offers value and performance plus flexible mounting

Posted 6 years ago

User-friendly compact encoder gets new side mount option

Posted 6 years ago

Reduce cabling with distributed servo drives from Inmoco

Posted 6 years ago

New functions make servo super-safe

Posted 7 years ago

Power storage modules act as servo UPS

Posted 7 years ago

Inmoco expands indexer family with motion features

Posted 7 years ago

Motion card integrates amps with full motion control

Posted 7 years ago

Wizard aids easy set-up of embedded motion controllers

Posted 7 years ago

EtherCAT master module for CTC 5300 Blue Fusion controller

Posted 7 years ago

OPC server gives instant access to automation controllers

Posted 7 years ago

Atlas single-axis motion amplifier is multi-talented

Posted 7 years ago

Rotary encoder establishes absolute position at start-up

Posted 7 years ago

Inmoco goes back to BASIC with new programmable servodrive

Posted 7 years ago

Mid-performance, high torque per pound servomotor

Posted 7 years ago

Stepper motors: advanced techniques

Posted 8 years ago

How to calculate point-to-point SCARA movements

Posted 8 years ago

Trombone servo drive range now has increased power

Posted 8 years ago

M4-X DC servomotor range is rugged and high performance

Posted 8 years ago

Achieve smaller, faster, smarter motion control

Posted 8 years ago

Expandable motion control system for extreme conditions

Posted 8 years ago

Elmo Gold Drum HV extends servo drive range to 65kW

Posted 8 years ago

B-Hornet military servo for high-power burst applications

Posted 8 years ago

O.P.S. Optical Encoders can be customised

Posted 8 years ago

ORMEC XD indexer family of servo drives expanded

Posted 8 years ago

Free automation systems control app for iPhone and iPad

Posted 8 years ago

Inmoco's Elmo Gold Servo Drives gain EtherCAT compliance

Posted 8 years ago

Inmoco introduces Elmo's DC Trombone digital servo drive

Posted 8 years ago

Robust linear actuators with integral force measurement

Posted 9 years ago

Energy-efficient IP67 stainless steel servo motors

Posted 11 years ago

Servo drives can be networked with IEEE 1394b

Posted 11 years ago

Wider choice of combined motion control and PLC units

Posted 11 years ago

Electronic cam controller suits labelling and capping machines

Posted 11 years ago

High-resolution encoder offers exceptional versatility

Posted 11 years ago

Elmo Duo controller integrates twin Whistle servo drives

Posted 11 years ago

Compact Guitar servo drive delivers 5kW of power

Posted 11 years ago

Ethernet/IP and Modbus options for multi-axis network manager

Posted 11 years ago

Elmo Solo Whistle saves servo application design time

Posted 12 years ago

New three-axis stepper modules for programmable controller

Posted 12 years ago

Electric linear actuators incorporate force measurement

Posted 12 years ago

Miniature ChipEncoder measures just 7x11mm

Posted 13 years ago

Cost-effective alternative for linear positioning and control

Posted 13 years ago

Rotary actuator includes servo motor, amp and position control

Posted 13 years ago

CANopen and absolute encoder options for digital servo drives

Posted 13 years ago

Programmable encoders feature miniature sensors

Posted 13 years ago

MicroE Systems' Mercury II digital encoder 'sets new benchmark'

Posted 13 years ago

Inmoco introduces ServoWire Motion and Logic Controller

Posted 13 years ago

Inmoco now offers Servotecnica slip rings

Posted 14 years ago

Inmoco launches "world's smallest" 50-nanometre encoder

Posted 14 years ago

High-resolution encoder is claimed to be the world's fastest

Posted 14 years ago

More technical articles
3 days ago
Boxing clever
A new chainflex cable box means big shipping cost savings for customers
3 days ago
New industrial vision online channel sees the light of day
Industrial vision provider IDS is making its expertise as a manufacturer of digital industrial cameras available free of charge and readily accessible on a new platform
3 days ago
Ball screws help protect buildings from earthquakes
Ball screws from NSK are helping to protect structures and people in earthquake zones
3 days ago
ATEX certification for new pneumatic valve island
Pneumatic process control offers numerous benefits, especially in hygienic applications. Bürkert says that its new Type 8652 AirLINE valve island provides users with improved safety features, communications and diagnostics
3 days ago
ABB launches condition-based maintenance service for robots
New service enables users to plan ahead and optimise production performance
3 days ago
What the UK-EU trade deal means for UK vehicle manufacturers
Now the UK has left the EU, the transition period has ended and the two parties have established a new trading relationship, UK-based vehicle manufacturers have some clarity over what they need to do to serve three key markets: Great Britain (England, Scotland and Wales), the EU and Northern Ireland
3 days ago
Farnell publishes Industry 4.0 ebook
New ‘Industry 4.0 Interviews’ ebook is available for free download from Farnell and showcases the opinions of leading global experts on the future of IIoT and Industry 4.0
3 days ago
Can DC motors be used at high temperatures?
There is no need for a heated discussion about it as maxon’s motor expert Andrew Gibson offers a view on the subject
4 days ago
Switching up a gear
Phoenix Contact is expanding its line of unmanaged switches
4 days ago
New Intertronics metering, mixing and dispensing system
Adhesives supplier Intertronics has introduced a new 2-K-DOS metering, mixing and dispensing system, said to be a compact, benchtop unit suitable for materials including silicones, polyurethanes and epoxies