PULS DIN-rail power supplies come with long-term support

PULS Power is promoting its high-reliability DIN-rail power supplies, saying it is committed to supporting its customers for as long as is possible with products designed into their systems. PULS has undertaken not to discontinue standard products while enough demand is present to make them viable for manufacture. This provides customers with the reassurance that they will not be forced into costly changes to their system components and performance in regular short intervals and to have support for their equipment throughout the entire end system lifecycle.

PULS also makes the reliability of its products a very high priority. The data for MTBF and service lifetime is described in detail in the data sheets for every product and is specified precisely for many operating conditions. In addition, there is an in-house guideline at PULS defining that for every product in the DIMENSION range a minimum service life of 50,000h must be accomplished at full load, nominal mains voltage 120V/230V and an ambient temperature of +40degC. This requires an additional loop in the development process, but the user has the advantage that they can take any product from the range and rely on specified and uniform minimum values. When looking at the values for reliability customers will clearly see significant differences in comparison to other manufacturers' power supplies.

Marco van der Linden, Country Manager for PULS comments: "We provide outstanding support which is not typically found in our industry. We are able to do this as PULS controls the whole chain from design engineering through sourcing, manufacturing, sales and support in-house. For example, we can still supply, in high-volume manufacturing, our Silverline products which were introduced in the 1990s, and we are supporting some customers with AP and DP products where the first units were sold in 1981. Our customers and their success are highly valued at PULS and long product availability is a key element in our strategy they can rely on."

Typical applications for PULS DIN-Rail power supplies include industrial and process control, building automation, panel-building, test and measurement, instrumentation and communications systems. Versions are available approved for railway systems and ruggedised for harsh environments.

For more information about PULS DIN-rail power supplies go to www.pulspower.com.


Cranfield Innovation Centre
University Way
MK43 0BT

+44 (0)1525 841001



More products
9 hours ago
PPMA appointments James Causebrook as new chairman
James Causebrook, managing director at Grunwald UK, has been appointed as the new chairman of the PPMA. With over 15 years of valuable experience in business, James is sure to hit the ground running, knowing what it takes to lead a team and exceed its targets.
11 hours ago
BFPA appoints Chris Butcher as managing director
BFPA has announced the appointment of Chris Butcher as managing director. He joins BFPA from Woodway Engineering, where he was managing director for the Coventry based company, and brings over 25 years of experience in the fluid power industry.
16 hours ago
Robot marketplace makes individual low-cost automation even easier
Igus says its RBTX online marketplace, which helps users looking for cost-effective automation solutions, brings over 100 cost-effective automation solutions to your fingertips, and includes new functions and automation feasibility demonstrations.
2 days ago
TMI Group turns to Kawasaki for milling machine automation
Dutch integrator RFA Rijlaarsdam Factory Automation has installed a Kawasaki Robotics EMEA RS020N robot with an Okuma Benelux Genos M460V-5AX milling machine at TMI Group Nederland in Hengelo.
2 days ago
100 million seals made from 45% recycled plastics
Essentra Components is expanding the ranges of security seals that it will manufacture using a minimum of 45% recycled material, after a successful 100 million piece initial phase.
5 days ago
Vision systems help IMA Group raise industry standards
IMA Active, a division of IMA Group dedicated to the production of automated systems and machinery for the pharmaceutical industry, has upgraded its continuous tablet-coating solution with the installation of Omron’s vision system equipped with a high-speed colour camera and dome light.
5 days ago
New robotics sales engineer for the North East
With demand for RARUK Automation’s automation solutions continuing to grow, the company has expanded its team of robotics and systems sales engineers. The most recent appointment is Tony Bailes, the new robotics sales engineer for the North East of England.
1 week ago
Kistler Group presents global climate strategy
The Kistler Group has presented its global climate strategy with facts and figures on its commitment to greater sustainability in its first sustainability report.
1 week ago
Euchner looks to drive growth strategy with new appointment
Euchner has further demonstrated its commitment to its growth strategy with the appointment of Hollie Dixon in a new business development role.
1 week ago
Energy efficiency is the best way for industry to cut costs
In a new report, ABB is quoted on recommendations for improving industrial energy efficiency, which is seen as being the best way for businesses to cut costs and reduce emissions right now.

Login / Sign up