PULS Power launches 500W waterproof ZeroCabinet power supply

The ZeroCabinet from PULS Power meets the growing need for flexible, modular power systems for machine building and process engineering. Decentralisation of system components has proven to be an important factor in modern system planning as it simplifies installation, enables expansion and reformatting of systems, and simplifies maintenance. In addition, conventional control cabinets can be replaced by smaller versions or even removed completely.

ZeroCabinet is a new type of power supply that was developed specifically for this environment. A decentralised power supply with protection to class IP54, IP65 or IP67 that is available ex stock, is easy to install and flexible enough to meet the diverse requirements of modular factory automation.

Traditional industrial systems designed with a central IP20-rated power supply will have long cable runs to peripheral devices in the field and will require costly large cross-section cables to minimise losses. It is also common for such a power supply to be overspecified to compensate for any potential cable losses. ZeroCabinet is the alternative to a power supply in a centralised control cabinet. It provides an energy efficient, point of load, modular system structure which is simple to expand and maintain.

Two versions of the PULS ZeroCabinet are available both offering either 300W or 500W power output.

The high-power singe DC output Basic series ZeroCabinet, which can be connected in parallel to increase total output power or form an N+1 redundant system using integrated high efficiency MOSFET decoupling (Oring).

The eFused series which may be specified with up to 4 current-limited DC outputs and may be configured for NEC Class 2 circuits. This power supply simplifies the implementation of selective power distribution, protection and monitoring directly in the field. The eFused series is a space-saving power supply system featuring integrated current-limited outputs and is a real alternative to a power supply unit with an external electronic protection module. Special features include staggered output activation, protection of sensitive loads through prioritised outputs and selective shutdown in the event of a fault.

PULS ZeroCabinet power supplies may be used for the decentralised supply of 1-phase or 3-phase systems and machines and feature a no potting Eco-friendly modular design which may be specified with IP54, IP65 or IP67 for reliable protection against ingress of dust and water.

Key features include an LED interface providing system status and immediate diagnosis in the field, output voltage and the current-limited outputs (eFused series) may be monitored and set directly via the LED interface and the push buttons on the front of the device or remotely via IO-Link. Various connector options enable the power supply to be installed flexibly and directly on the machine. DIN-Rail, integrated keyholes or screw mounting with no additional accessories required.

ZeroCabinet is available with input voltage ranges 1-phase 85-264V, 1-phase 170-264V, 3-phase 320-550V, output voltage from 24-28V DC, output power 300W or 500W, efficiency >95 per cent, an operating temperature range from -25degC to +55degC without any loss of performance and has dimensions (W×H×D) of 181×183×57mm.

The potential applications of PULS ZeroCabinet are virtually limitless and include modular applications in the field of conveyor systems, storage technology, robotics, control systems and materials handling.

Marco van der Linden, UK Country Manager, for PULS comments: "Our new ZeroCabinet decentralised power supply offers designers of industrial systems a cost and space-saving alternative to conventional power distribution. ZeroCabinet makes it possible to use shorter and smaller cross-section cables, which reduces both the cost of cabling and of its installation. In addition, an all-in-one device can be used instead of several components simplifying system design and reducing inventory."

Follow the link for more information about PULS ZeroCabinet waterproof power supplies.

PULS UK Ltd

Cranfield Innovation Centre
University Way
Cranfield
MK43 0BT
UNITED KINGDOM

+44 (0)1525 841001

sales@puls.co.uk

www.pulspower.com

More products
15 minutes ago
Innovation, technology, collaboration and sustainability
Rockwell Automation has released the program for its flagship European event, ROKLive EMEA 2022, 24-27 October in Gothenburg, Sweden, with keynote topics focusing on innovation, technology, collaboration and sustainability.
1 day ago
Igus acquires majority stake in Commonplace Robotics
Motion plastics specialist Igus is investing in growing its low cost automation activities and has now acquired a majority stake in robot integrator Commonplace Robotics.
1 day ago
Trio extends automation control capabilities at SPS 2022
Trio Motion Technology is presenting a host of new automation control capabilities for machine builders at Germany’s SPS exhibition, including a new motion coordinator, servo drive, and industrial PC.
1 day ago
Minitec UK highlights profile system and design software at EDS
Minitec UK will be exhibiting at this year’s Engineering Design Show, held at the Coventry Building Society Arena, from 12–13 October. Highlights of this year’s stand will be the Minitec Aluminium Profile System and Minitec UK’s iCAD Assembler software.
2 days ago
Securing the future of spring manufacturing
In many Lesjöfors businesses, the company sees apprenticeships as a strategic way to introduce, train and keep the most suitable staff for the future. In the UK, European Springs and Pressings has just on-boarded five new apprentices in an extensive program.
2 days ago
EMS to showcase Faulhaber range at Engineering Design Show
Electro Mechanical Systems (EMS) will showcase the latest Faulhaber motor systems at the Engineering Design Show (EDS), taking place at the Coventry Building Society Arena on October 12 to 13, 2022.
3 days ago
Rockwell Automation announces intent to acquire Cubic
Rockwell Automation has signed a definitive agreement to acquire Cubic, a company that specialises in modular systems for the construction of electrical panels.
3 days ago
LG Motion highlights cobot system at EDS 2022
At the Engineering Design Show (EDS) 2022, LG Motion’s will showcase the Techman collaborative robots (cobots) which are easy to implement and install. They will be shown as part of an integrated conveyor system.
4 days ago
Tackling noise emissions from industrial machinery
Employers and dutyholders are required under the Provision and Use of Work Equipment Regulations 1998 (PUWER) to provide workers with equipment that meets relevant supply laws. They must also adhere to the Control of Noise at Work Regulations, and the Health and Safety Executive (HSE) offers guidance which sets out an employer’s legal obligations. Paul Taylor, business development director for industrial services at TÜV SÜD, looks at the issue of machinery noise.
6 days ago
Compair highlights the importance of compressor energy efficiency
With the global rise in electricity prices, the energy costs of compressed air have increased to as much as 91% of the total cost of ownership, and operators need to urgently review the efficiency of their system says Graham Read, product manager for industrial compressors at Compair.

Login / Sign up