Reducing machine tool energy consumption

No business should ever underestimate the large amount of energy consumed by machine tools. Cooling enclosures and spindles alone commonly account for more than 15 per cent of a company's annual energy bill. A test installation at a CNC lathe has demonstrated that Rittal Blue e+ chillers significantly reduce energy consumption while also being simple and easy to use.

Bosch Rexroth AG, a long-established global manufacturing company, runs an energy efficiency consultancy called GoGreen at its headquarters in the Bavarian town of Lohr am Main. GoGreen's purpose is to examine and improve the energy efficiency of the company's production plants worldwide. To this end, GoGreen works closely with institutes, as well as technology partners such as Rittal, to test possible options.

One of the most important research projects which GoGreen is involved in is the "Eta-Fab" (energy efficiency, technology and application centre) project at the Technical University of Darmstadt.

The project is headed by the University's Institute for Production Management, Technology and Machine Tools (PTW); a facility that can closely replicate conditions and processes used in the Rexroth plant in Elchingen, allowing effective and accurate testing of potential innovations in areas such as improving the energy efficiency of machine tools.

Retrofitting CNC lathes

Among the products made at the Elchingen plant are hydraulic pumps and motors for mobile machines. Many of the components for the hydraulic power units are manufactured on a CNC lathe which has a total connected load of 75kVA and runs for up to six days a week in three-shift operation.

CNC lathes need their spindles to be cooled to dissipate the heat generated by the drive technology - and this is typically achieved through liquid cooling.

The GoGreen team examined what would be the impact of replacing the existing compressor cooling unit on the lathe, with a new Rittal Blue e+ Chiller. The Blue e+ delivers the cooling medium and its DC compressor, controlled by an inverter, generates the necessary cooling output in the chiller. A circuit then transports the cooling medium to the spindles.

An impressive increase in energy efficiency

The test demonstrated that the Blue e+ could reduce energy consumption significantly. Leo Pototzky, GoGreen Project Manager, Bosch Rexroth, said of the trial: "The Rittal Blue e+ chiller consumes 50 per cent less electrical energy than the old chiller, while the saving achieved by the cooling unit in the enclosure even exceeded 80 per cent. This example shows us that a great potential still exists in many sectors."

Ease of use

The trial also highlighted how easy the Blue e+ is to operate. The control panel with its touch display communicates to operators in plain text, and in up to 21 different languages. This means that operators receive clear information and updates in status, which allows them to respond quickly to any issues.

The Blue e+ App communicates with the cooling units via NFC (Near Field Communication, an international transmission standard based on RFID technology for contactless data exchange), allowing important information to be transmitted wirelessly; a functionality which is especially important when a number of chillers have been configured. It allows operators easy operational oversight and facilitates a swift response, if required.

Further information about Rittal Blue e+ chillers can be found at www.rittal.co.uk.

Rittal Ltd

Braithwell Way, Hellaby Industrial Estate
Hellaby
Rotherham
S66 8QY
UNITED KINGDOM

+44 (0)1709 704000

information@rittal.co.uk

https://www.rittal.co.uk

More technical articles
56 minutes ago
Innovation, technology, collaboration and sustainability
Rockwell Automation has released the program for its flagship European event, ROKLive EMEA 2022, 24-27 October in Gothenburg, Sweden, with keynote topics focusing on innovation, technology, collaboration and sustainability.
1 day ago
Igus acquires majority stake in Commonplace Robotics
Motion plastics specialist Igus is investing in growing its low cost automation activities and has now acquired a majority stake in robot integrator Commonplace Robotics.
1 day ago
Trio extends automation control capabilities at SPS 2022
Trio Motion Technology is presenting a host of new automation control capabilities for machine builders at Germany’s SPS exhibition, including a new motion coordinator, servo drive, and industrial PC.
1 day ago
Minitec UK highlights profile system and design software at EDS
Minitec UK will be exhibiting at this year’s Engineering Design Show, held at the Coventry Building Society Arena, from 12–13 October. Highlights of this year’s stand will be the Minitec Aluminium Profile System and Minitec UK’s iCAD Assembler software.
2 days ago
Securing the future of spring manufacturing
In many Lesjöfors businesses, the company sees apprenticeships as a strategic way to introduce, train and keep the most suitable staff for the future. In the UK, European Springs and Pressings has just on-boarded five new apprentices in an extensive program.
2 days ago
EMS to showcase Faulhaber range at Engineering Design Show
Electro Mechanical Systems (EMS) will showcase the latest Faulhaber motor systems at the Engineering Design Show (EDS), taking place at the Coventry Building Society Arena on October 12 to 13, 2022.
3 days ago
Rockwell Automation announces intent to acquire Cubic
Rockwell Automation has signed a definitive agreement to acquire Cubic, a company that specialises in modular systems for the construction of electrical panels.
3 days ago
LG Motion highlights cobot system at EDS 2022
At the Engineering Design Show (EDS) 2022, LG Motion’s will showcase the Techman collaborative robots (cobots) which are easy to implement and install. They will be shown as part of an integrated conveyor system.
4 days ago
Tackling noise emissions from industrial machinery
Employers and dutyholders are required under the Provision and Use of Work Equipment Regulations 1998 (PUWER) to provide workers with equipment that meets relevant supply laws. They must also adhere to the Control of Noise at Work Regulations, and the Health and Safety Executive (HSE) offers guidance which sets out an employer’s legal obligations. Paul Taylor, business development director for industrial services at TÜV SÜD, looks at the issue of machinery noise.
6 days ago
Compair highlights the importance of compressor energy efficiency
With the global rise in electricity prices, the energy costs of compressed air have increased to as much as 91% of the total cost of ownership, and operators need to urgently review the efficiency of their system says Graham Read, product manager for industrial compressors at Compair.

Login / Sign up