Regenerative drives boost efficiency of dockside crane

Parker SSD has supplied AC890 series system drives with regenerative braking to improve the control and energy-efficiency of a large dockside crane at Clydeport's Hunterston terminal.

A crane control refurbishment project at Clydeport's Hunterston terminal relies on Parker SSD AC890 series system drives to deliver pinpoint control in the unloading of coal from vessels. The crane can lift up to 36 tonnes of coal in a single grab, then deposit the load reliably and accurately into the dockside hopper, even in inclement weather and winds of 40mph or more.

Clydeport operates Scotland's main west coast ports, with Hunterston located on the Clyde Estuary in North Ayrshire providing a world-class bulk coal facility. Formerly known as the Hunterston Ore Terminal, the facility was built on reclaimed land in the late 1970s by the former British Steel Corporation to land iron ore and coal, the raw materials for the Ravenscraig Steel Plant in Motherwell. Ravenscraig closed in 1992 and the terminal was bought by the Glasgow-based Clydeport port management company to handle coal.

The long-travel dockside crane at Hunterston is one of the largest in the UK but, at over 30 years old, its control system was beginning to show its age. Relying on mechanical brakes and thruster brakes, operation could be a nerve-wracking business in the typically challenging weather conditions. In addition, mechanical wear and damage were ongoing problems, with the squaring of wheels and worn out tracks. Modern ports demand absolute efficiency, and demurrage - the compensation paid to the owner of a vessel which has been delayed in port beyond the agreed time - can be considerable.

Refurbishment

To inject a new lease of life into the crane, Clydeport decided on a major refurbishment of the control system, and put the project out to tender. Among the keys to success would be the ability to integrate seamlessly with the existing Ward Leonard field control system, and to provide regenerative braking with an active front end (AFE) tied to the dock power supply. The former would maintain Clydeport's own engineering personnel's familiarity with the system, giving them increased confidence, while the latter would be key to increased control and energy efficiency.

The tender was won by system integrator T&M Machine Tools, with owner Tom Yates developing a control system built around Parker SSD AC890 series drives with AFE technology for regenerative braking. Yates comments: "AC drives normally dissipate braking energy by using dynamic braking resistors. However, crane applications can operate much more efficiently with an active front end. Here the drives are on a common DC bus where the overall system shares the line's energy, with the active front end providing a clean, efficient method to regenerate the drive's braking energy directly back into the line as required."

Each of the crane's legs has four 37kW motors. The control system developed by Yates divides these into eight paired sets, each under the control of an AC890 drive.

Engineering support

The control panel itself was built for Yates by the systems department at Parker SSD's Littlehampton facility, which also provided full engineering support for the wider upgrade project. Yates worked closely with Parker SSD to develop the AFE regenerative braking system, with the full regenerative operation giving the crane drivers pinpoint joystick control of the traverse movement of this large crane. Yates says: "The AFE regenerative braking allows a lot of energy to be dissipated very quickly, giving very accurate control even in heavy winds."

Boats at the Hunterston terminal are unloaded at rates of over 2000 tonnes per hour. Yates comments: "The operators find the refurbished crane much easier to drive, which gives them a lot more confidence, and so helps to boost unloading efficiency. They can drive the crane faster, confident that they have pinpoint accuracy of traverse movement. Even in high winds, the crane can perform electronic acrobatics. Also, mechanical wear is significantly reduced, so maintenance requirements are simplified, and further potential for demurrage is eliminated."

Testament to the success of the upgrade is the fact that T&M Machine Tools has been awarded another contract for a second crane. "This is another job where I shall definitely be working with Parker SSD," says Yates. "The products are extremely capable, and the engineering support from Littlehampton is excellent."

Parker Hannifin

Tachbrook Park Drive
Tachbrook Park
Warwick
CV34 6TU
UNITED KINGDOM

+44 (0)1926 317878

parker.uk@parker.com

www.parker.com/uk

More applications
4 hours ago
What changes does the new machinery regulation bring?
As the machinery regulation replaces machinery directive 2006/42/EC, Dirk Meyer, specialist engineer solution architect at Eaton, looks at what is changing.
8 hours ago
Klüber Lubrication receives Schaeffler Supplier Award 2022
Schaeffler has awarded Klüber Lubrication with the Supplier Award 2022 in the field of quality. The jury emphasised in particular the global supplier's strong commitment to the compliance with quality standards.
11 hours ago
Essentra Components cuts energy usage by 15% globally
An innovative energy reduction initiative based on the concept of insulated jackets is helping industrial components manufacturer Essentra Components cut its energy usage when heating machine barrels by 15% and save CO2 emissions in the process.
1 day ago
Fluke addresses requirements to improve operational efficiencies
Rising energy costs and more stringent legislation guiding sustainable practices is spurring companies to re-evaluate processes and seek new tools and technologies to reduce waste and overcome challenges in today’s industrial environments.
4 days ago
7th axis robot in a welding application
An Igus 7th axis on a collaborative robot working alongside staff at German screening machine manufacturer Rhewum is helping to increase the workspace from 1300 to 5500mm.
4 days ago
Robust inductives position automotive workplace carriers on conveyor
An automotive manufacturer is relying extensively on the reliability of Contrinex’s robust and high-performance inductive sensors in the automated assembly of engines, where cylinder heads are transferred for mounting on the engine.
4 days ago
New Leuze plant in Malaysia begins operation
After a construction time of just 16 months, Leuze has opened its new production site in Malaysia. With immediate effect, Leuze sensors will be produced there for the international market.
4 days ago
Nord brings industry solutions to Drinktec trade fair
From 12 to 16 September 2022, the beverage and liquid food industry meets at the world leading drinktec trade fair in Munich. Nord Drivesystems will be presenting its solutions for the industry, which focus on energy efficiency and hygiene.
5 days ago
Stephenson Gobin celebrates 50 years
UK manufacturer Stephenson Gobin is celebrating 50 years in business, a milestone that shows its commitment to innovation in the motion control industry.
6 days ago
Join a free webinar on the smart factory journey
Ripley Solutions invites you to attend a free webinar, where solutions architect Paul Holding will talk you through the smart factory journey, a roadmap to connected manufacturing.

Login / Sign up