Robots make sure there isn't a screw loos"¦

Mitsubishi Electric has worked with system integrator TQC to build a new production line for a customer where robots and automation have been combined with an OEE monitoring system to ensure assembly and testing work is carried out as efficiently and effectively as possible.

When working towards optimising production efficiency, the worst-case scenario for this manufacturer is for an assembly to reach testing with missing parts or inconsistent screw torque and therefore fail the test procedure. In case of a failure the assembly would have to be disassembled and examined as well as the cause of failure investigated, then rectified. All of which is both time consuming and very costly.

To avoid this scenario, the product being assembled has been designed specifically so that it can be manufactured and tested using a combination of robots, automation and people.

At the start of the line some of the initial parts are positioned on a pallet by human operators using a pick-to-light guided operator bin system and cameras to ensure correct parts are picked and positioned. Screwing the parts down and adding O-rings, lubricant and additional small components is then carried out by a pair of Mitsubishi Electric articulated arm robots working in tandem. Robots are well suited for these procedures simply because they are faster and more consistent with this type of operation.

The robots are Mitsubishi Electric's popular MELFA Series units, offering extended articulation, dynamic movement and fast cycle times. These characteristics are combined with a class-leading degree of accuracy and repeatability, ensuring high levels of productivity can be achieved.

An important feature for the integrator is the modular nature of the control components. The robot controllers, for example, are mounted directly on the same physical backplane as the Q series PLC that runs the entire production line. This not only reduces purchase costs for the hardware, but also saves space and simplifies integration and commissioning work.

Cross-platform programming

The production line was designed and installed by TQC using a complete package of components and software from Mitsubishi Electric including drives, HMIs, networking and operational software in addition to the robots and PLCs. TQC sales director Mark Jones comments: "The cross-platform way of programming and the ease of integration between hardware and software make it simple to develop even for quite complex systems. This enables us to deliver projects quickly and control costs more effectively."

The customer is also reaping the benefits of an integrated OEE system installed on the line, with live performance dashboards displayed on large monitors to give operators real-time data about the line efficiency. With this information, they can easily see when line efficiency is dropping and take action to correct it. Moreover, it is enabling continuous improvement of the line, by recording and showing the immediate effect of any pro-active changes that are made.

Steve Kirby, the Mitsubishi Electric Sales Manager responsible for the project comments: "The robots have replaced much of what would have traditionally been elements of "˜fixed automation' in this project. Because they can multitask so effectively, from positioning screwdrivers to fitting small delicate parts and even passing assemblies to each other, a number of different models of the end product can be manufactured on this line.

"This flexibility is not only space efficient, but also makes the production facility itself more responsive, both of which contribute significantly to the bottom line. Combined with the OEE visualisation, the Mitsubishi Electric products have made a huge contribution towards improving efficiency, quality, productivity and resource optimisation."

Go to gb3a.mitsubishielectric.com for further information on the MELFA Series units and other Mitsubishi Electric products.

Mitsubishi Electric Europe B.V.

Travellers Lane
Hatfield
AL10 8XB
UNITED KINGDOM

+44 (0)1707 288780

automation@meuk.mee.com

https://gb3a.mitsubishielectric.com

More applications
19 hours ago
NSK roller guides increase uptime of blow moulding machines
A manufacturer of PET (polyethylene terephthalate) bottles frequently had to replace the linear guides on its blow moulding machines. However, after switching to NSK’s RA series roller guides, there have been no failures for over a year, producing annual cost savings in maintenance, spare parts and downtime of €60,000.
21 hours ago
Design your future at Design Engineering Expo 2022
With innovation at its core, Design Engineering Expo 2022 is the perfect place for forward thinking design engineering professionals to gain insight into new technologies, learn how to improve efficiencies and gain inspiration for ideas they can implement into their workplace, to put them ahead of their competitors and form part of their future strategy.
23 hours ago
Tray handling system gently handles medical-use glass cartridges
Gerresheimer Medical Systems Division produces over one billion high quality, medical grade, glass cartridges every year and central to its new post-production inspection and packaging system is the IEF Werner varioSTACK CF (Clean Factory) tray palletiser.
1 day ago
WDS reinforces stock availability with production machine upgrade
WDS Components has strengthened its stock availability of standard parts and components by upgrading its on-site production machinery.
2 days ago
Bostik present details of new 2K cyanoacrylate prototype
Bostik’s Born2Bond R&D team has released details of a new cyanoacrylate-based adhesive prototype at the ‘in-adhesives’ event, proving how products are being developed for a near-future that will see instant adhesives used for long-term critical applications.
5 days ago
Virtual factory and showroom tours provide access to best practices
Mitsubishi Electric is opening up access to its factory automation sites and showrooms through virtual tours with the aim of overcoming the restrictions on in-person visits caused by the pandemic.
5 days ago
Food-safe, tribo-optimised coating increases packaging throughput
A packaging and processing machinery builder has reduced drag, improved rigidity, increased throughput and raised hygiene standards on one machine family by applying an iglidur IC-05 tribo-coating on a mitre bar application.
5 days ago
Unlocking the benefits of micromotors at Design Engineering Expo
Small DC motor supplier EMS will be exhibiting the Faulhaber BXT-SC series and the AM3248 stepper motor at this year’s Design Engineering Expo, taking place at the NEC in Birmingham on June 8 to 9, 2022.
6 days ago
Advanced Engineering partners with SMMT and ADS
At this year’s Advanced Engineering UK, held at the NEC, Birmingham on 2-3 November, automotive and aerospace businesses will have the opportunity to meet with buyers from the sectors’ leading OEMs.
6 days ago
Telford based supplier has a handle on Truckman Tops
One of the UK’s best-known brands in the automotive aftermarket industry is Truckman, and the company’s new Truckman Classic hardtop for the Isuzu D-Max now features Vector T3 locking handles supplied by Industrilas.

Login / Sign up