Safety light curtains require cabling on one side only

ifm electronic is launching safety light curtains that require cabling on one side only, which greatly simplifies installation. The system consists of a transmitter/receiver unit on one side and a passive reflector on the other. So far three versions have been announced by ifm for protecting areas 0-6m wide with two, three or four light beams.

These units are designed to the following standards: Type 4 (IEC 61496-1), SIL 3 (IEC 61508), SILcl 3 (IEC 62061), PL e (EN ISO 13849-1).

Follow the link for more information about these new safety light curtains from ifm electronic.

ifm electronic Ltd

Kingsway Business Park
Oldfield Road
Hampton
TW12 2HD
UNITED KINGDOM

+44 (0)20 8213 0000

enquiry.gb@ifm.com

https://www.ifm.com/uk

More from ifm electronic Ltd

New ecolink cables for field mounted sensors

Posted 1 hour ago

New valve sensor connects to pneumatic actuator solenoid

Posted 2 weeks ago

New flow sensors have the measure of gases

Posted 1 month ago

New safety interlocks from ifm electronic

Posted 1 month ago

Versatile DV2100 range signal lamps from ifm electronic

Posted 3 months ago

First G 1/2 pressure sensors approved for hygienic applications

Posted 5 months ago

Multi-function sensor simplifies condition monitoring

Posted 5 months ago

RFID system with compact housing and choice of interfaces

Posted 6 months ago

Rugged inclination sensors are immune to vibration

Posted 7 months ago

ifm introduces safety light grid with integrated muting

Posted 7 months ago

ifm launches IP67 rotary encoders with IO-Link connectivity

Posted 8 months ago

Self-checking temperature sensor improves reliability

Posted 8 months ago

Ultrasonic sensors with IO-Link have 8m measurement range

Posted 1 year ago

New fieldbus modules with IO-Link master functionality

Posted 1 year ago

New software for smarter machine condition and energy monitoring

Posted 1 year ago

New RFID antennas with IO-link connectivity

Posted 1 year ago

Ultrasonic sensors benefit from IO-Link

Posted 2 years ago

New inductive proximity switches sense all metals at same range

Posted 2 years ago

Inductive sensors take a leap forward with IO-Link

Posted 2 years ago

Solid-state fuses for the 24V circuit

Posted 2 years ago

Photoelectric sensors withstand exposure to oils and coolants

Posted 4 years ago

All-in-one PLC, safety controller, AS-i gateway and data logger

Posted 4 years ago

New relays simplify level monitoring and control

Posted 4 years ago

New touch sensors from ifm electronic

Posted 5 years ago

Compact I/O-modules for AS-Interface

Posted 5 years ago

Background-suppressed photoelectric sensors use time-of-flight

Posted 5 years ago

Programmable IO-Link incremental encoders with integral display

Posted 5 years ago

Compact O6 type photoelectric sensors from ifm electronic

Posted 6 years ago

Vibration transmitter in high grade stainless steel housings

Posted 6 years ago

Compact temperature switch from ifm features fast response

Posted 6 years ago

New features for PN pressure sensor from ifm

Posted 6 years ago

Capacitive pushbuttons are fully sealed, with LED indication

Posted 6 years ago

New inclination sensors with high precision in two axes

Posted 6 years ago

Sensor monitors particulate contamination of hydraulic oil

Posted 6 years ago

Cylinder sensors from ifm electronic withstand weld fields

Posted 6 years ago

Measure compressed air in large pipes

Posted 6 years ago

Hazardous area vibration monitoring

Posted 6 years ago

Compact M8 splitters for standard wiring and AS-interface

Posted 6 years ago

New SBY flow switch from features very quick reaction

Posted 6 years ago

New range of Profibus splitters launched by ifm electronic

Posted 6 years ago

RFID systems from ifm electronic

Posted 6 years ago

New high-temperature inductive sensors from ifm electronic

Posted 6 years ago

Robust long-range photocell has easy set-up

Posted 6 years ago

Speed monitor family with extended functions

Posted 7 years ago

ifm electronic adds new features to analogue threshold relay

Posted 7 years ago

New features for ifm electronic's digital converter

Posted 7 years ago

Ring lights for vision sensors from ifm electronic

Posted 7 years ago

Hygienic high-temperature pressure sensor from ifm electronic

Posted 7 years ago

Compact analogue pressure sensor for compressed air monitoring

Posted 7 years ago

ATEX 3D sensors from ifm comply with latest requirements

Posted 7 years ago

Universal sensor: new inductive range from ifm electronic

Posted 7 years ago

Background-suppressed photoelectric sensors use time-of-flight

Posted 7 years ago

Smaller, energy-efficient power supplies from ifm electronic

Posted 7 years ago

Compact photoelectric sensors designed for wet areas

Posted 7 years ago

All-in-one temperature transmitter with display

Posted 7 years ago

AS-i and IO-Link combined in AC5225 AS-i IO-Link module

Posted 7 years ago

Metris flow rate meters with IO-Link

Posted 7 years ago

UHF RFID systems for reliable product tracking

Posted 7 years ago

Flow meters now available to suit higher flow rates

Posted 7 years ago

Robust photoelectric sensors operate at mains voltage

Posted 8 years ago

AS-i Safety at Work relay can be configured for many functions

Posted 8 years ago

New normally-closed fail-safe inductive sensors

Posted 8 years ago

Antennas extend scope of industrial RFID systems

Posted 8 years ago

New RFID system with integrated Profibus-DP interface

Posted 8 years ago

See new products from ifm electronics at Drives & Controls

Posted 8 years ago

New DA101S safe standstill monitor from ifm electronic

Posted 8 years ago

See vibration monitors and compressed air meters at MAINTEC

Posted 8 years ago

New Type 2 and Type 4 IP69K safety light guards from ifm

Posted 9 years ago

Stainless steel inductive proximity switches with long range

Posted 9 years ago

See sensor products at The Energy Event 2011

Posted 9 years ago

See condition-based monitoring systems at Maintec 2011

Posted 9 years ago

UHF RFID systems available with a choice of antennae

Posted 9 years ago

LMT hygienic point level sensor stays clean for reliable sensing

Posted 9 years ago

Pneumatic cylinder position sensors operate at 110V

Posted 9 years ago

IN5409 valve position sensor is robust and easy to install

Posted 9 years ago

TP temperature transmitter plug saves space and cost

Posted 9 years ago

Miniature photoelectric sensors measure 9mm deep

Posted 9 years ago

New Type 4 safety light curtains with 20m range

Posted 9 years ago

New slimline Type 4 safety light curtains with 14mm resolution

Posted 9 years ago

Machine condition monitoring - sensor and transmitter combined

Posted 10 years ago

AS-i module for standard 4-20mA analogue I/O

Posted 10 years ago

PCBs make products compatible with AS-i Safe

Posted 10 years ago

AS-i safety monitors include internal safety slave

Posted 10 years ago

3D camera for industrial machine vision systems

Posted 10 years ago

Inductive ring and tube sensors - static and dynamic versions

Posted 10 years ago

Versatile flow meter also monitors temperature

Posted 11 years ago

Posted 11 years ago

ISO 10816 vibration monitor has analogue and alarm outputs

Posted 11 years ago

Slimline Type 2 and Type 4 IEC 61496 safety light curtains

Posted 11 years ago

Posted 11 years ago

Temperature probes are fast and precise

Posted 11 years ago

Valve feedback sensors boast high reliability

Posted 11 years ago

Temperature sensors feature IO-Link interface

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

IFM controller e masters conform to AS-i M4 profile

Posted 11 years ago

Cylinder sensors are more exact, with small hysteresis

Posted 12 years ago

Pressure sensors suit pump diagnostic applications

Posted 12 years ago

Efector Octavis cuts cost of bearing condition monitoring

Posted 12 years ago

Fail-safe inductive sensors in M12, M18 and M30 cube styles

Posted 12 years ago

Efector Dualis object sensors are easier to integrate

Posted 12 years ago

Software simplifies implementation of FDT technology

Posted 13 years ago

Temperature sensors offer fast response

Posted 13 years ago

New flow sensors have stainless steel housings

Posted 13 years ago

Fail-safe inductive sensors work with standard safety relays

Posted 14 years ago

AS-i connectors sealed to IP68 and IP69K for washdowns

Posted 14 years ago

More products
1 hour ago
HARTING at Smart Factory Expo 2020
The comapny will be showcasing its range of connectivity solutions at the online Smart Factory Expo from the 9th to the 13th November 2020
1 day ago
New vibration damper means no great shakes
Elesa has introduced a new range of AISI 316 stainless steel wire rope vibration dampers  
1 day ago
Visit the Schaffner SPS Drives 2020 virtual exhibition stand
A digital exhibition of EMC/EMI filters for regenerative drive applications and more
2 days ago
High-quality UK made ABS power supply cases
13A Plug-in and In-line styles from BCL Enclosures includes flame-retardant ABS models
3 days ago
Variohm Group buys Phoenix America
Based in Fort Wayne, Indiana ,Phoenix offers a range of absolute and incremental encoders, together with speed and proximity sensors, custom moulded magnets and more
3 days ago
New chain configurator aids machine builders
Tsubaki's recently unveiled configurator can make specifying chain a whole lot quicker and easier
3 days ago
Counterfeit bearings – NSK continues the fight against the fakes
The scale of the fake bearings problem has been highlighted with the discovery of around 23,000 counterfeit NSK packages and labels at a plant in Hebei Province, China
3 days ago
Parker launches new hydraulic fluid particle contamination monitor
The company’s icount LaserCM30 Particle Contamination Monitor is now available and can provide test results in 90 seconds
3 days ago
Last few places on Machinery Safety Course
Just a handful of places remain available on the last Pilz City & Guilds accredited Machinery Safety Course in 2020. Diary date is December 14th to 17th
4 days ago
Camozzi Automation launches new quick exhaust safety valves
Designed to provide a plug and play solution for OEMs that need to be compliant with Machinery Directive 2006/42/EC, Camozzi Automation says that its new quick exhaust 2-way safety valve range also complies with ISO 13849-1 covering the safe design of control systems which perform safety functions