Schaeffler becomes an e-F@ctory Alliance partner

Schaeffler is now a partner in the e-F@ctory Alliance, a factory automation initiative by Mitsubishi Electric Europe. The FAG SmartCheck condition monitoring device from Schaeffler is now a certified e-F@ctory Partner Product and will play a role in helping customers move towards Industry 4.0.

e-F@ctory is the Mitsubishi Electric system for improving the performance of any manufacturing enterprise, providing three key benefits: reduced total cost of ownership, maximised productivity, and seamless integration. As part of the e-F@ctory Alliance, Mitsubishi Electric Europe joins forces with other partner companies that are recognised technology or market leaders in their respective industry. Together, the partners ensure that customers are always offered the best possible complete system for their automation projects.

Industry 1.0 began with the industrial revolution, which was followed in the early 1900s by Industry 2.0 - the rise of mass production. The third phase, Industry 3.0, started in the late 1960s with the introduction of computer-based manufacturing. This phase saw the introduction of programmable logic controllers (PLCs), the beginning of modern control and automation as we know it today.

According to industry experts, the future of manufacturing and the next step in our digital evolution is "˜Industry 4.0'. Introduced by the German Government as a way of promoting the computerisation of manufacturing, Industry 4.0 describes the next major step towards global manufacturing. Here, processes are no longer viewed as separate entities, but as one integrated "˜cyber-physical' system comprising processors, sensors, software and communication technologies.

Since its launch in 2011, FAG SmartCheck has been continuously developed and has proved its effectiveness with customers. FAG SmartCheck is compact device that can be used to monitor vibration and temperature, as well as a range of other machine and process-specific parameters. By monitoring these parameters, users are provided with a broad basis of information in real time, which enables the accurate assessment of machine condition. Due to its self-learning (Teach-In) mode, the device's alarm thresholds are adjusted automatically. After set up and commissioning, the unit operates autonomously. The relevant machine parameters are measured and saved continuously in the system, creating a substantial database of historical data over time.

Comprehensive condition monitoring

FAG SmartCheck is one of a small number of options available in the market that is suitable for use as both an individual monitoring device for smaller redundant units, as well as for integrated concepts such as comprehensive condition monitoring of machines and manufacturing processes.

As part of the e-F@ctory Alliance, Schaeffler has not only found a partner that enables access to automation control units and process control systems, but that also pursues the same objectives for its customers - to reduce the overall costs of production and maintenance, as well as to increase productivity.

Increasing energy costs requires manufacturers to implement lean production systems that help to eliminate risk, reduce costs and better manage maintenance to minimise production downtime. Condition monitoring on the shop floor together with energy monitoring, for example, should therefore be integrated with Enterprise-level systems. To optimise maintenance, there must be complete transparency throughout the enterprise, from shop floor to top floor.

In order to ensure that this level of transparency is achieved, the joint system provided by the e-F@ctory partnership combines the Mitsubishi Electric control unit with the FAG SmartCheck to form a pre-configured overall system for the customer. This facilitates an automated link from the manufacturing level through to the control level.

Unlike alternative monitoring concepts that typically measure conventional values such as temperature, pressure and operating hours, FAG SmartCheck provides additional vibration-based parameters. In conjunction with the Mitsubishi control unit, it is therefore possible to develop a comprehensive approach for assessing the condition of a machine or system. The data can be sent via Ethernet (e.g. Ethernet TCP/IP protocols or web services) to other data receivers, such as the automation control units of other manufacturers or database-supported receivers, such as SCADA or Manufacturing Execution Systems (MES).

Experts from Schaeffler and Mitsubishi Electric provide support during project planning, including the defining of suitable measurement points and ensuring seamless integration to the customer's own systems (e.g. SAP and Oracle). The scalable monitoring system provides high system availability and contributes towards ensuring trouble-free, continuous operation. The overall system efficiency and energy efficiency are also very closely linked. Furthermore, the system allows predictive maintenance to be carried out. This not only reduces lifecycle costs but also plays a role in reducing energy consumption thanks to its ability to detect early any signs of wear.

Success in a wastewater treatment plant

The sewage treatment plant in Rotenburg an der Fulda has treatment capacity for 34,000 residents and serves approximately 20,000 people. At the secondary sedimentation tank, three Archimedes pumps are connected to the return activated sludge pumping station. Within the space of 12 months, one of the three screw pumps failed due to a design fault. Due to bearing damage, the gear block was torn apart and replaced, which was costly and time-consuming.

To prevent similar problems occurring in the future, a condition monitoring system comprising a Mitsubishi control unit and three FAG SmartCheck devices was installed on the three pumps. The FAG SmartCheck devices measure the vibrations and temperature of the gearbox. In the event of changes in vibration, the system provides data at an early stage about these deviations, which can indicate initial signs of wear or damage. In the event of irregularities, a detailed error message is sent to the customer's control system via the Mitsubishi control unit, which is integrated to the customers' process. This ensures that the problem is identified and rectified quickly.

For more information on FAG SmartCheck, please visit www.fag-smartcheck.com. To learn more about the e-F@ctory Alliance, visit www.e-factory-alliance.com/partner.php?id=1204.

Schaeffler (UK) Ltd

Unit 308, Fort Dunlop
Fort Parkway
BIRMINGHAM
B24 9FD
UNITED KINGDOM

+44 (0)121 313 5830

info.uk@schaeffler.com

www.schaeffler.co.uk

More news
4 hours ago
Nabtesco delivers solutions for every drive application
To continue meeting increasing demand, Nabtesco is substantially expanding its production capacities with the construction of a new factory in Hamamatsu, 250 km southwest of the its headquarters in Tokyo – which will double the annual production capacity to two million precision gearboxes by 2026.
21 hours ago
Festo showing ‘Progress in Motion’ at PPMA 2022
The Festo stand at PPMA 2022 will focus on key applications for the process and packaging sector. These include innovative process valve controls, servo-controlled flow wrapping and a new solution for controlling web tension with dancing rollers.
1 day ago
IFM Electronic makes IIoT easy at PPMA 2022
At this year’s PPMA Show, IFM Electronic is focusing on its moneo IIoT platform. This has been developed specifically to provide a convenient solution to the challenge of converting the huge amount of data produced by modern plant and machines into useful information that can be used to reduce downtime, optimise efficiency and cut costs.
1 day ago
Bürkert extends capabilities with Fine Controls partnership
The key distribution partner agreement between Bürkert and Fine Controls brings OEMs or end users in process control a distributor who can supply all the parts necessary to build a complete process system, as well as offering design and specification support.
5 days ago
Individual service for signal integrity
The demands on connection technology performance are constantly increasing. By providing customised support, Phoenix Contact helps customers select connection components to ensure the highest possible signal integrity.
5 days ago
Aveva MES rises in the leader ranks of the latest Gartner report
Aveva’s Manufacturing Execution Systems (MES) offering, which is deployed in the UK & Ireland by AVEVA Select partners SolutionsPT, has been recognised as a global leader in industrial software in the latest 2022 Gartner Magic Quadrant for Manufacturing Execution Systems.
5 days ago
Harwin and MSA Components sign German distribution deal
Harwin is bringing greater strength to its German supply chain through a new strategic partnership with MSA Components. The agreement allows MSA to offer all the latest products from Harwin’s extensive portfolio.
6 days ago
Siemens selected by Microsoft for RAMP Programme
Siemens Digital Industries Software has been selected to participate in the Rapid Assured Microelectronics Prototypes (RAMP) Phase II initiative.
6 days ago
Kontron receives VDC Research’s Gold Award for vendor satisfaction
Kontron has been recognised for outstanding customer satisfaction. The company has received the Gold Vendor Satisfaction Award for IoT and Embedded Hardware technology from VDC Research.
6 days ago
Mouser wins Vishay Distributor of the Year Award
Mouser Electronics has received the 2021 High Service Distributor of the Year award from Vishay Intertechnology, one of the world’s largest manufacturers of discrete semiconductors and passive electronic components.

Login / Sign up