Schaffner introduces ecosine active sync series harmonic filters

Schaffner is again aiming to set a benchmark with its product offering for harmonics mitigation. ecosine active sync utilises superior technology to reliably mitigate excessive harmonics with an evolutionary modular product concept.

With the new ecosine active sync filters FN3530/31/40/41, FN3532/42 and FN3545 Schaffner now offers the most effective harmonic mitigation option available, especially for mixed load and dynamic load profiles. By deploying ecosine active sync filters it is possible to achieve a THID ≤ 5 per cent. They also guarantee compliance with the toughest requirements of IEEE-519 and other stringent international power quality standards while being the most effective and compact active harmonic filters available in the market.

The filters demonstrate excellent performance over an extended temperature range (power module 0-50degC full performance, up to 55degC with derating). With the installation of the new ecosine active sync filters, harmonic current mitigation, reactive power compensation as well as load balancing can be efficiently achieved and international power quality standards complied with. Furthermore, the electrical infrastructure is unburdened and its utilisation is much more efficient and reliable.

With their modular concept ecosine active sync filters offer great flexibility, which enables optimal customer-tailored products. ecosine active sync filter systems can be easily installed as wall-mount devices based on 60Arms power modules. These modules are available in IP20 and IP21 protection class and in 3-phase 3-wire and 3-phase 4-wire configurations. Two power modules in a master-slave architecture can be configured as a dedicated solution for 120Arms. The Double Power Pack (DPP) offers real 120Arms without derating up to+ 50degC. For higher current ratings, up to 5 ecosine active sync power modules can be connected in parallel to mitigate harmonic current up to 300Arms. This can be done either as a wall-mount option or within Schaffner's new IP54 air-cooled cabinet. Aligning product offerings with international market requirements and customer expectations, the new Schaffner modular filters ensure the tailored prodcuts and optimal fit for demanding applications and networks.

ecosine active sync filters FN3430/31/32 are designed for 50Hz and 60Hz, 380V AC to 400V AC 3-phase 3-wire power grid, while the FN3440741/42 is designed for 50Hz and 60Hz, 380V AC to 415V AC 3-phase 4-wire grid. Power modules and DPP are available as protection category IP20 (IP21 as an option), while cabinet versions are of IP54. All filters are CE marked and RoHS compliant. ecosine active sync filters are simple to install and maintain and are fully integrated in Schaffner's popular and simple to use online power quality simulator the SchaffnerPQS3.

Pleas follow the link for further information about the ecosine active sync filters, or get in touch with your local Schaffner sales point or Schaffner partner for individual support.

Schaffner Ltd

Ashville Way
Molly Millar's Lane
Wokingham
RG41 2PL
UNITED KINGDOM

+44 (0)118 9770070

uksales@schaffner.com

www.schaffner.com

More from Schaffner Ltd

New EMC filters for medical machinery applications

Posted 1 week ago

Schaffner reintroduces FN2415 single-phase EMC filter

Posted 1 month ago

Webinar: EMC compliance of industrial equipment and machines

Posted 1 month ago

New ecosine max series passive harmonic filters from Schaffner

Posted 6 months ago

Schaffner extends family of ecosine evo passive harmonic filters

Posted 7 months ago

Schaffner EMC Products now available on the EPLAN Data Portal

Posted 8 months ago

Schaffner launches power line EMC filter family

Posted 11 months ago

Schaffner awarded large-scale automobile industry contracts

Posted 11 months ago

Schaffner expands range of current compensated chokes

Posted 1 year ago

Schaffner: (re)shaping electrical power at SPS 2019

Posted 1 year ago

How to select the right fuse or MCB to work with an EMC filter

Posted 1 year ago

IEC C14 power entry module with filter and fuse holder or switch

Posted 1 year ago

New EMI filters from Schaffner with low leakage current

Posted 1 year ago

Schaffner's new generation of modular active harmonic filters

Posted 1 year ago

Schaffner expands range of passive harmonic filters

Posted 1 year ago

Schaffner launches smallest three-phase book-style EMC filter

Posted 1 year ago

Schaffner to exhibit innovations in EMC and power quality

Posted 1 year ago

Schaffner to display EMC filters and more at Electronica 2018

Posted 1 year ago

Schaffner appoints new Head of Power Magnetics division

Posted 2 years ago

Work starts on new headquarters for Schaffner

Posted 2 years ago

Component-level filter design made simple

Posted 2 years ago

Schaffner posts significant growth in sales and operating profit

Posted 2 years ago

Schaffner high-end IEC power entry modules meet IEC IEC62368-1

Posted 2 years ago

Schaffner single-phase EMC filter now has DC approval

Posted 2 years ago

Schaffner Group appoints new COO and boosts sales and profit

Posted 2 years ago

eco sine active sync: new generation of active harmonic filters

Posted 2 years ago

Schaffner to unveil several new product ranges at SPS 2017

Posted 2 years ago

Schaffner increases its range of current compensated chokes

Posted 3 years ago

New CEO for the Schaffner Group

Posted 3 years ago

New IP20 versions of ecosine evo passive harmonic filters

Posted 3 years ago

Schaffner Group continues to broaden ecosine evo series

Posted 3 years ago

Schaffner introduces ecosine evo passive harmonic filters

Posted 3 years ago

Compact, low loss EMC filters for photovoltaic applications

Posted 3 years ago

New generation 690/600V AC dv/dt filters from Schaffner

Posted 4 years ago

SchaffnerPQS3: Schaffner's power quality simulator is updated

Posted 4 years ago

Compact current-compensated chokes up to 10A

Posted 4 years ago

Enclosed ECOsine high power line passive harmonic filters

Posted 5 years ago

More products
1 hour ago
Last few places on Machinery Safety Course
Just a handful of places remain available on the last Pilz City & Guilds accredited Machinery Safety Course in 2020. Diary date is December 14th to 17th
4 hours ago
Camozzi Automation launches new quick exhaust safety valves
Designed to provide a plug and play solution for OEMs that need to be compliant with Machinery Directive 2006/42/EC, Camozzi Automation says that its new quick exhaust 2-way safety valve range also complies with ISO 13849-1 covering the safe design of control systems which perform safety functions
4 hours ago
SICK’s Open Service for IO-Link function blocks
A new open software service for control systems has been introduced by SICK
3 days ago
Automatic bearing lubrication brings ore inspiring results in mining
By installing automatic lubricators for bearings on its conveyor drive motors and belt pulleys, an opencast mine in Hungary has seen a range of benefits, including the prevention of unplanned downtime, longer bearing life and reduced repair work
3 days ago
Kinoulton company conveys COVID-combating masks
Here's a great example of the germ of an idea resulting in the combating of COVID
3 days ago
FLIR Systems announces four new Exx-Series handheld thermal imaging cameras
New E96, E86, E76 and E54 models feature enhanced thermal resolution and provide on-camera routing capability for more efficient inspections
4 days ago
New C-Mount lenses bring focus for machine and system builders
IDS now offers more than 20 new C-mount lenses with resolutions of 5, 8 and 10 MP as well as different focal lengths and optical classes
4 days ago
Backup DC motor for two rolling mill applications
Menzel Elektromotoren has built a replica of an old DC motor for a large German steel strip manufacturer
4 days ago
Distributed safety systems webinar 30th October 0930
In this webinar Pilz UK Product Manager David Collier will examine the state-of-the-art technology available to meet the demands of decentralisation
4 days ago
New narrow FeedThrough connectors save panel space
New from Cliff Electronics is the SLIMS FeedThrough Connector range, designed and manufactured in the UK