Self-reversing lead screws manufactured in short lead times
Posted to News on 6th May 2008, 17:10

Self-reversing lead screws manufactured in short lead times

Traditional lead or acme screws require the driven screw to counter-rotate to achieve a bi-directional movement of the nut and, importantly, to allow the nut to return to its start position. In contrast, the self-reversing screw only requires a rotation of the screw in one direction to achieve a reciprocating bi-directional linear movement.

Self-reversing lead screws manufactured in short lead times

Abssac's self reversing screws do not utilise ball bearings in their linear travel; instead they use a track blade style. These screws are not offered as a standard range, as each item is manufactured to the customer's individual specification.

Self-reversing lead screws typically take about 5-7 weeks to be manufactured by Abssac. They can be created in almost any mild steel, stainless steel, bronze or aluminium. The nut can be supplied in a style and size according to the customer's requirements. Most small self-reverser screws are 3/8inch diameter with a nut block measuring 30x30x35mm. However, Abssac can also supply units up to approximately 250mm diameter with lengths of many metres.

For more information about self-reversing screws, visit www.abssac.co.uk/Products/Linear-products/92/Self_reversing_screws.html.

Want the latest machine building news straight to your inbox? Become a MachineBuilding member for free today >>


ABSSAC Ltd

E1A The Enterprise Centre
Enterprise Way
WR11 1GS
UNITED KINGDOM

+44 (0)1386 421005

Procter Machine Safety Procter Machine Safety ABSSAC Ltd Mechan Controls Ltd Pilz Automation Technology Kawasaki Robotics (UK) Ltd Micro Epsilon UK Limited Euchner UK Ltd Aerotech Ltd Leuze electronic Ltd AutomateUK Smartscan Ltd ifm electronic Limited STOBER Drives Ltd Heidenhain (GB) Ltd