Should I choose a collaborative or cooperative robot?

Robots are becoming increasingly easy to use, more economical and suitable for a higher number of industrial applications. As human operators and robots increasingly share a common space in the manufacturing environment, the choice between a collaborative or cooperative machine is naturally being given more consideration. Barry Weller, Product Manager at Mitsubishi Electric, looks at the key features of collaborative and cooperative robots and how to quickly identify the best system for an intended application.

Collaborative and cooperative machines are both designed to share a workspace with humans, interacting with them without the need for physical safety guarding systems. Collaborative robots, or cobots, such as Mitsubishi Electric's MELFA RV series Assista articulated arm robots are specifically designed to implement safe human-robot collaborations. Cooperative robots, on the other hand, are industrial robots equipped with safety features such as Mitsubishi Electric's SafePlus safety system that use proximity sensors to safeguard personnel entering the operating space.

Based on these features, "˜cooperative' industrial robots have generally been associated with applications where durability, high speed, payloads, accuracy and high repeatability are the ultimate requirements. Programming is not performed by the operator and set routines don't change frequently. Easy decision then, cooperative is the answer.

Recent advances in collaborative robots, however, have started to blur the line when it comes to applications that require the same accuracy but payloads are lighter and batch sizes are smaller. When a robot can be "˜taught' quickly by the operator to adapt or initiate a new routine, then collaborative can be the better option. There are many examples such as fine assembly work or sample transfers in bio-tech applications where a robot might be a good option, and the fact that there is now a crossover between a dedicated cobot and an adapted industrial robot using a safety sensing system is relevant, because the accuracy and repeatability is now comparable. Service lives are also similar, which creates a new set of questions for end users.

Defining the task

The first aspect that businesses should consider is the ultimate automation goal they would like to achieve. Knowing this would help them determine the type of contact expected between human operators and robots. In some cases, humans and robots have to work together on a common task. In this case, the workspaces of humans and robots overlap both spatially and chronologically to combine the strengths and advantages of both parties.

In these situations, cobots would provide the best option. For example, cobots are suitable when machines need to handle and hold parts while humans work on them. The ergonomics of a cobot arm are very different to that of a human; reach and repeatability are better, as is holding still for long periods. In this situation it can make a task far more comfortable for a human to complete, using robot assistance. This not only improves the working environment but is also a benefit for quality and productivity.

On the other hand, if human operators and robots only briefly interact with each other, cooperative systems would suit the application best. This may be the case for environments where humans are not working alongside the robot but require regular access to the robot cell. Packing, palletising, loading machine tools, filling etc are obvious examples.

In addition, it is important to consider the payload and cycle time requirements. When these aspects are not relevant, both collaborative and cooperative robot systems can be used. However, heavy components or fast processes can only be handled effectively by cooperative robots.

Inner space

Another consideration is the space available for the automation equipment. It is possible to set up adjustable safety zones for cooperative systems, where position, speed and torque of the robot can be limited or stopped as the human approaches. This is useful for packing stations where, for example, a forklift has to come into the area to remove a pallet; however, for assembly tasks where the operative is constantly working close to a robot arm, the arm would spend too long at a slow speed or stopped. If the task requires manipulation of a low payload and is located in a compact working space, then collaborative systems offer improved efficiency.

End users also need to determine the level of flexibility in their automated processes in order to define which robotic option would best address their needs. Collaborative robots can easily add flexibility to assembly processes that need to make lots of highly individualised products, in low volumes over short batch cycles. Conversely, cooperative robots are more suited for high-volume production of items that may feature small variabilities. ROI is very often the deciding factor and this can be difficult to calculate, especially for new applications with lots of variables; however, talking to an expert robot integrator is always a good place to start.

Learn more at gb3a.mitsubishielectric.com.

Mitsubishi Electric Europe B.V.

Travellers Lane
Hatfield
AL10 8XB
UNITED KINGDOM

+44 (0)1707 288780

automation@meuk.mee.com

https://gb3a.mitsubishielectric.com

More technical articles
3 hours ago
Mouser Electronics receives TDK’s top distribution awards
Mouser Electronics has received three top distribution awards from TDK. Mouser was honoured with TDK’s Global Best Performance Award for Fiscal Year 2022, North America Distributor of the Year for Calendar Year 2021, and European Distribution Award in High-Service Distribution for 2021.
13 hours ago
White Paper addresses assembly challenges
Resolve assembly challenges instantly with Henkel’s new high performance LOCTITE 402, an innovative instant adhesive that also improves workplace safety. Download the all-new white paper here.
21 hours ago
Schaeffler organises worldwide Climate Action Day
June has seen Climate Action Day at all Schaeffler locations worldwide, with every one of the approximate 83,000 Schaeffler Group employees stopping work for 90 minutes to focus on climate issues.
1 day ago
Yokogawa helps Solar Team Twente to solar challenge win
Yokogawa’s WT5000 precision power analyser has been used by Solar Team Twente to win the first ever Solar Challenge Morocco. The WT5000 helped the team to squeeze every last watt out of its car’s solar power system, ensuring it crossed the finish line of the 2,500 km course in first place.
1 day ago
HVACR OEM relies on Emka locking technology
When HVACR OEM Hansa Klimasysteme needed new connecting elements for the corners of its air-conditioning units to stabilise the housing cube, suitable for die-casting, it turned to Emka.
1 day ago
LEM holds inauguration ceremony for new production plant
Electrical measurement specialist LEM has held an inauguration ceremony in Penang, Malaysia for its new production plant. The ceremony marked a major step in the plant’s construction with the first electric current sensor products expected to come on-line in Q1 2024.
2 days ago
ITI acquires digital manufacturing specialist Cimlogic
ITI, one of the UK’s largest independent systems integrators, has acquired Cimlogic, a leading digital manufacturing solutions and services provider to some of the world’s largest manufacturers.
2 days ago
Atlas Copco saves precision sheet metal manufacturer over £6,000 a month
When Constant Group, a Manchester-based supplier of sheet metal parts, components, and fully assembled fabrications pieces were let down by their previous service provider for onsite high-pressure nitrogen generation, they turned to Atlas Copco for help.
3 days ago
Timber plant reduces downtime with NSK linear guides
Thanks to the adoption of NSK’s linear guides with K1 lubrication units, a timber manufacturer managed to reduce conveyor downtime by a factor of more than 12, prompting annual cost savings of more than €77,000.
3 days ago
Renishaw announces investment of over £50 million for UK site
Renishaw is to invest over £50 million at its Miskin site in South Wales to increase manufacturing capacity and to help meet its Net Zero emissions targets.

Login / Sign up