Siemens control system helps maintain combat aircraft

A "˜one stop shop' control system from Siemens UK & Ireland, including an innovative machine tool collision-avoidance software programme, is delivering operational, safety and cost benefits for the Eurofighter Typhoon aircraft and its UK manufacturer, BAE Systems.

Eurofighter Typhoon - considered the world's most advanced swing role combat aircraft - is capable of achieving supersonic speed in under 30 seconds and can travel the distance between London and Birmingham in just 6 minutes. Its use varies from air policing and peace support through to high-intensity conflict deployment.

Chris Dowson, Product Specialist-Machine Tool Modernisation at Siemens UK & Ireland, explains the background to the new innovative and comprehensive control system: "Following a long-standing service relationship with the maintenance team at BAE Systems, we assisted in the appraisal process of the legacy control system used in the spray booth for the Eurofighter Typhoon. We concluded that it was becoming increasingly obsolete which could, in the future, potentially present issues around safety, operational efficiencies and resourcing.

"In particular, we focussed upon the "˜man movers' - a set of moving platforms controlled by a CNC controller which are used to support the skilled personnel hand spraying the aircraft's exterior. BAE Systems wished to identify if there was a solution to minimise any potential for the platforms to inadvertently strike the aircraft during the spraying process. The sprayers are encased in full breathing equipment which impairs visibility and reduces their ability to successfully intervene if the platforms move too close to the aircraft. Any interruption part way through a spray, for example if the platform came into contact with the aircraft's exterior, would mean the surface would have to be rubbed down again and re-prepared for spraying. In addition, through our discussions we were also able to develop and propose additional enhancements to both the diagnostic and overall process supervision aspects."

The Siemens team devised a new holistic control system to support BAE Systems. Overview ATEX Zone 1 pc-based HMI panels running Siemens TIA Portal WinCC SCADA were mounted onto the man mover spray platforms to generate improved transparency and control over the system. They control 840D sls on each of the four operational man movers to govern overall trajectory, movement and control as the sprayers undertake their tasks. They are linked to a supervisor PC located in a nearby office to provide additional supervision on the process.

However, the real evolution within the system involves the specification of the Siemens Sinumerik 840D sl Collision Avoidance software package, as Chris Dowson explains: "The inclusion of the unique 840D sl Collision Avoidance software elevates the overall solution, eradicating the potential for preventable damage to the aircraft during the spraying process by ensuring a safe distance is maintained at all times between the man mover platforms and the aircraft surface.

"The company helpfully provided CAD drawings of the outer surfaces of the Eurofighter Typhoon and from these we were able to devise a software package that would prevent any collisions whether the platforms were in automatic or manual mode. Testing was a critical phase before installation could proceed and rather than risk anything going wrong with an operational aircraft, we were able to borrow a full-size model from an aircraft museum to prove the functionality worked before engaging the solution on site. This satisfied the BAE Systems team that the Collision Avoidance software technology would provide an operationally reliable and safe answer."

As well as an enhancement to the spraying process via the anti-collision software, the improved diagnostics of the Siemens product has driven tangible process availability and reliability advances for BAE Systems. The combined efficiencies generated by the overall control system in the spray booth upgrade means that BAE Systems expect to realise a return on its investment within 24 months.

Ian Hopkins, Facilities Engineering Manager - BAE Systems, summarises the benefits of the system: "The new system within the spraying facility provides us with increased capability, flexibility and reliability. One key benefit for us, especially the operators, is the addition of the anti-collision system, this allows the operator to get closer to the aircraft without being concerned they will bump it; they can therefore concentrate on the job in hand. Furthermore, the system can be easily reprogrammed for use with different aircraft which gives us flexible operational options going forward."

Further information about Siemens control systems is available at www.siemens.com.

Siemens Industry Automation & Drive Technologies

Sir William Siemens House
Princess Road
Manchester
M20 2UR
UNITED KINGDOM

+44 (0)161 446 5000

sales.ad.uk@siemens.com

www.siemens.co.uk

More from Siemens Industry Automation & Drive Technologies

New Siemens Sivacon S8 Power Partner appointed

Posted 5 days ago

Finance 4.0 helps machine builders benefit from Industry 4.0

Posted 2 years ago

Control & Automation BEng degree at University of Salford

Posted 3 years ago

TIA Portal V14 engineering framework: new features

Posted 4 years ago

Extracting business risk through teamwork

Posted 4 years ago

Siemens releases entry-level SIMATIC industrial rack PC

Posted 4 years ago

Siemens expansion module for condition monitoring system

Posted 4 years ago

Siemens UK & Ireland: preferred supplier for glass maunfacturer

Posted 5 years ago

New display sizes for Siemens Sinumerik 828D controls

Posted 5 years ago

Siemens releases new motors geared towards use in machine tools

Posted 5 years ago

Siemens optimises flat panel technology for harsh environments

Posted 5 years ago

Siemens expands industrial ethernet switch portfolio

Posted 5 years ago

Control success for Siemens partner

Posted 5 years ago

Siemens brings its Integrated Drive Systems roadshow to the UK

Posted 5 years ago

Siemens launches 5-year warranty across SCALANCE range

Posted 5 years ago

Enhanced compact drives offer greater power density

Posted 6 years ago

Siemens launches communications technology partnership

Posted 6 years ago

New Simotics standard motors with highest efficiency class

Posted 6 years ago

Siemens to expand range of time relays

Posted 6 years ago

Siemens and British Glass announce technology partnership

Posted 6 years ago

Siemens routers enable remote access to automation networks

Posted 6 years ago

Simatic WinCC Scada software goes mobile

Posted 6 years ago

Aggregate Industries to enter strategic partnership with Siemens

Posted 6 years ago

Siemens appoints Juergen Maier as new UK Chief Executive

Posted 6 years ago

Flat panels offer multi-touch and gesture operation

Posted 6 years ago

Siemens teams with P2i to protect smartphones

Posted 6 years ago

Paper mill cuts out problems thanks to Siemens technology

Posted 6 years ago

New high-end industrial PC range from Siemens Industry

Posted 6 years ago

Retrofit drives future efficiencies

Posted 6 years ago

Efficient CNC systems on show from Siemens at MACH 2014

Posted 6 years ago

Totally Integrated Automation improves production flexibility

Posted 6 years ago

Siemens Industry appoints food and beverage sector lead

Posted 6 years ago

Operational efficiency via flexible drives and control system

Posted 6 years ago

Siemens process control technology used in pilot plant

Posted 6 years ago

Scada software expanded for analysis of individual KPIs

Posted 7 years ago

Siemens expands Sinamics G120P series

Posted 7 years ago

Siemens presents distributed Sinamics S120M servo drive

Posted 7 years ago

Siemens helps machine builder put a cap on traceability issues

Posted 7 years ago

Controller performance enhanced for major automation tasks

Posted 7 years ago

Partnership set to launch cooker and control system

Posted 7 years ago

Integrated automation controls rail straightening machine

Posted 7 years ago

Siemens launches new Simotics FD motor series

Posted 7 years ago

Siemens Large Drives extends partnership with Iconsys

Posted 7 years ago

Telecontrol for SIMATIC controllers

Posted 7 years ago

Siemens and KUKA announce cooperation

Posted 7 years ago

Safety first for machine launch with Siemens

Posted 7 years ago

Siemens apprentices develop Biospheric Project technology

Posted 7 years ago

Siemens hails UK as a "˜world-class innovation hub'

Posted 7 years ago

Siemens and HMK: A partnership driving technology innovation

Posted 7 years ago

Leading UK manufacturers warn of rising cyber security attacks

Posted 7 years ago

Siemens acquires Preactor to boost industrial software portfolio

Posted 7 years ago

Product family extends temperature sensor portfolio

Posted 7 years ago

Additional functions for LOGO! logic modules

Posted 7 years ago

Sinamics G120 portfolio enhanced with new control unit

Posted 7 years ago

Bolstered sector support from Siemens Industry

Posted 7 years ago

Performance improved for compact, embedded-class industrial PCs

Posted 7 years ago

Siemens Industry and Elite Controls offer controls one-stop-shop

Posted 7 years ago

Siemens expands industrial widescreen monitor choice

Posted 7 years ago

Drive system upgrades for high-speed paint lines

Posted 7 years ago

Siemens acquires specialist network provider RuggedCom

Posted 7 years ago

Siemens launches mid- to high-end Simatic S7-1500 PLC

Posted 7 years ago

New products from Siemens to improve operational efficiency

Posted 7 years ago

Siemens adds new widescreen terminal devices to HMI range

Posted 8 years ago

Power and efficiency gains for Siemens TIA Portal version 12

Posted 8 years ago

Siemens S7 plcs improve reliability for paper convertor

Posted 8 years ago

Siemens launches extension to single-phase power supplies

Posted 8 years ago

Increased range of Siemens Industry motor stock from Brammer

Posted 8 years ago

Upgraded Sinamics inverter range now available with Profinet

Posted 8 years ago

Manufacturers must unite on priorities for growth says report

Posted 8 years ago

RS Components expands Siemens stocked offer in Europe

Posted 8 years ago

"˜Answers for Industry' event tackles UK manufacturing questions

Posted 8 years ago

Siemens safety switches have a flexible modular design

Posted 8 years ago

Motor scrappage scheme from Siemens for EU MEPS compliance

Posted 9 years ago

Siemens named UK's number-one Industrial Engineering brand

Posted 9 years ago

Simatic WinCC V7 Service Pack 2 enhances functionality

Posted 9 years ago

Siemens ASI F-Link monitors 30 emergency stop buttons

Posted 9 years ago

Siemens launches Totally Integrated Automation (TIA) Portal

Posted 9 years ago

Sirius M200D motor starter is now Profienergy-compatible

Posted 9 years ago

New optical link modules for Profibus networks

Posted 9 years ago

Compact Sitop power supplies achieve high efficiency

Posted 9 years ago

Sinema Server monitors industrial Ethernet networks

Posted 9 years ago

Heavy demand for Sinamics G120P energy-saving inverter

Posted 9 years ago

Siemens raises standards for its Solution Partners

Posted 9 years ago

Safety relay is standstill monitor and safe speed monitor

Posted 10 years ago

New fail-safe CPUs for Simatic S7-400 controller

Posted 10 years ago

New Step 7 features for Simatic S7-1200 controller and HMIs

Posted 10 years ago

Converting Toolbox speeds development of converting machinery

Posted 10 years ago

Compact Simatic S7-300 CPU with Profinet and optional safety

Posted 11 years ago

Safety Evaluation Tool for EN ISO 13849-1 and EN 62061

Posted 11 years ago

Siemens unveils new products for machine tools

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Modular IP65 expansion units attach to HMI panels

Posted 12 years ago

Siemens releases Open Modbus/TCP block

Posted 12 years ago

19-inch rack PC requires less height and depth

Posted 12 years ago

Optocoupler module switches 4A currents at 500Hz

Posted 12 years ago

Siemens adds 40A model to Sitop modular power supply series

Posted 12 years ago

IP65/IP67 compact block IO modules with Profinet interfaces

Posted 12 years ago

New C240 PN Simotion controller handles up to 32 axes

Posted 12 years ago

1PH8 series main motors have outputs of 2.8-1340kW

Posted 12 years ago

Sinamics S110 AC servo converter is highly versatile

Posted 12 years ago

New model of Sinamics S120 converter is water-cooled

Posted 12 years ago

New Siplus extreme control and communication products

Posted 12 years ago

Step 7 Topology Editor aids Profinet commissioning

Posted 12 years ago

RFID readers easily integrate with S7, Profibus and Profinet

Posted 12 years ago

Distributed I/O modules use IWLAN for wireless communications

Posted 12 years ago

Simatic PC DiagMonitor Version 4.0 also monitors Flash media

Posted 12 years ago

Industrial wireless LAN enhanced with iHOP function

Posted 12 years ago

New low-cost Scalance XB-000 industrial Ethernet switches

Posted 12 years ago

Entry-level HMIs are sealed to IP65

Posted 12 years ago

Simatic Mobile Panel 277 includes 10.4inch touch screen

Posted 12 years ago

Touchscreen operator panel uses 4.3inch widescreen format

Posted 12 years ago

Siemens sells machine vision business to Microscan

Posted 12 years ago

Low-cost synchronous linear motor uses magnet-free track

Posted 12 years ago

New additions to Simatic PCS 7 Lab process control system

Posted 12 years ago

New CEO for Siemens Industry Solutions Division

Posted 12 years ago

Tools to monitor and simulate Profinet networks

Posted 12 years ago

Sirius 3RW30 soft starters offered in four frame sizes

Posted 12 years ago

Compact motor starter is AS-i compatible

Posted 12 years ago

Simatic PCS 7 and WinCC gain power management functions

Posted 12 years ago

Siemens launches IO-Link sensors and field modules

Posted 12 years ago

Ergonomic HMIs are fully sealed to IP65

Posted 12 years ago

Siemens launches new AS-i and AsiSafe products

Posted 12 years ago

Integrated technologies aid development of packaging lines

Posted 12 years ago

Simatic S7-mEC integrates control, HMI and PC functions

Posted 12 years ago

New Logo! logic units have option of local/remote display

Posted 12 years ago

New Siemens Sirius 3RK3 modular safety system

Posted 12 years ago

All-in-one single-axis drive, motion and logic controller

Posted 13 years ago

Industrial PCs now have Intel Core 2 Duo processors

Posted 13 years ago

Simatic ET200pro FC drive incorporates safety functions

Posted 13 years ago

Sinamics G120 converter has Profinet interface

Posted 13 years ago

Sinamics G120D IP65 drive includes safety functions

Posted 13 years ago

Advanced training programme for automation experts

Posted 13 years ago

Siemens launches new Flender Motox geared motors

Posted 13 years ago

Sirius relays monitor level, speed or residual current

Posted 13 years ago

1LE1 IEC low-voltage motors are compact and efficient

Posted 13 years ago

Simatic Mobile Panel 277 Wireless includes safety functions

Posted 13 years ago

Sirius LZS plug-in relays are user-friendly and reliable

Posted 13 years ago

New failsafe devices for S7-300 and ET 200S ranges

Posted 13 years ago

More communications options for Simatic ET 200pro

Posted 13 years ago

Modules connect Simatic ET 200M systems to Profibus/Profinet

Posted 13 years ago

Drive Control Chart provides for graphical programming

Posted 13 years ago

Simotion V4.1 gains cam interpoloation function

Posted 13 years ago

Simotion 4.1 gains more Profinet functions

Posted 13 years ago

Siemens launches HT-direct high-performance torque motors

Posted 13 years ago

Siemens Sivacon S8 switchboard is easy to implement

Posted 13 years ago

Microbox PC 427B IPCs have powerful Intel processors

Posted 13 years ago

Simatic MV230 sensor inspects surface contours and profiles

Posted 13 years ago

Siemens adds two CILs to Simatic IT MES

Posted 13 years ago

Siemens Automation and Drives acquires UGS

Posted 13 years ago

Simatic ET 200S gains digital I/O and fail-safe relay modules

Posted 14 years ago

Fail-safe 277F IWLAN Mobile Panel uses Rapid Roaming

Posted 14 years ago

New regenerative power modules for frequency inverter range

Posted 14 years ago

High-performance rack PC for complex automation tasks

Posted 14 years ago

New AS-Interface products for safety engineering

Posted 14 years ago

Cost-effective remote maintenance of machinery

Posted 14 years ago

Modular ASIsafe switches simplify installation

Posted 14 years ago

New process visualisation system improves performance

Posted 14 years ago

Compact design for new servo motor series

Posted 14 years ago

Pneumatic module enables cabinet-free automation

Posted 14 years ago

New Simotion C240 motion controller

Posted 14 years ago

Sinamics S120 with integral positioning function

Posted 14 years ago

Ethernet controller brings control devices into line

Posted 14 years ago

Service offers globally recognised safety approval

Posted 14 years ago

Improved real-time operating system for industrial PCs

Posted 14 years ago

Motor management system gains expanded functionality

Posted 14 years ago

Controller performance enhanced for major automation tasks

Posted 14 years ago

Controller performance enhanced for major automation tasks

Posted 14 years ago

Sinamics S120 with liquid cooling saves costs in poor conditions

Posted 14 years ago

Safety interlocks use ASIsafe for signals and power

Posted 14 years ago

Safety relay configured using front-panel DIP switches

Posted 14 years ago

Innovations in motion control for metal forming machinery

Posted 14 years ago

Innovative CNC technologies for aerospace applications

Posted 14 years ago

Newspaper folders upgraded with 'shaftless' Siemens technology

Posted 14 years ago

More applications
43 minutes ago
Modular safety relay claimed to be world first
Pilz says that its all-new myPNOZ is the world’s first batch size 1 safety relay
8 hours ago
Edge computing hardware and software choices for machine builders
RDS and AAEON offer machine builders an even greater choice of hardware and software to build high performance, integrated solutions for smart applications that require vision data to be processed at the edge
3 days ago
Certified Machinery Safety Expert course on 18th January
In conjunction with TÜV NORD, Pilz Automation UK is hosting its first CMSE Course of 2021. It starts on 18th January and lasts for four days
3 days ago
Improving communication with (and between) machines
Lenze has published a White Paper discussing PackML, a programming standard defined by OMAC, the Organisation for Machine Automation & Control. Here, Lenze's Marc Vissers provides machine builders with an insight into the paper
3 days ago
Danfoss buys Artemis Intelligent Power
Danfoss says it will allow them to begin the global commercial rollout of its Digital Displacement® pump technology, a disruptive low-carbon opportunity with applications in the industrial and off-highway markets
4 days ago
Quarter turn fastener that still turns heads
Automotive manufacturers are gradually making the transition from solely manufacturing vehicles to taking on more responsibility for the performance of a vehicle over its life cycle. As a result, OEMs are increasingly looking for ways to lower installation costs, and facilitate quick repeatable access to critical vehicle components in order to enable faster service calls
4 days ago
Wave spring or coil spring?
Simon Ward is Technical Manager at Uckfield-based fastener specialists TFC. Here he offers a machine designers a comparison between wave springs and round wire coil springs 
4 days ago
New course: Safety Design Incorporating EN ISO 13849-1/EN 62061
Pilz Automation UK says that this training course is designed to enable delegates to develop a greater understanding of the processes and standards related to safety control system specification, design and validation
5 days ago
Intelliconnect moves to larger factory as sales grow
Intelliconnect (Europe) Ltd has moved to a larger facility at the Corby Innovation Hub
5 days ago
ABB industrial robots get Wizard programming
ABB is expanding it Wizard easy programming tool to encompass its industrial robot range, saying that it makes robots easier to install, programme and operate without specialised training