Posted to Products on Thursday, April 17, 2008 Share:

Siemens launches new AS-i and AsiSafe products

Siemens is expanding its AS-Interface product portfolio by launching the AS-i V3 safety monitor and associated asimon V3 software, as well as the Sirius 3RA6 compact starter with AS-i connection.

With the new V3 safety monitor, users can safely control an actuator or actuator group via the AS-i network, which allows safety-related, distributed switching of, for example, valves or motor starters in parallel with a second enabling circuit. The new device also supports connection of two AS-i networks without additional modules.

The associated software tool, asimon V3, features a pixel-graphics editor for safety logic, which is said to make operation easier. Improvements have also been made to the functionality of asimon V3 with, for example, filtering of brief, single-channel interruptions in the sensor circuit.

Sirius 3RA6, a new compact starter, can be modified for use as an AS-i enabled unit without tools and without any other wiring overhead. This is possible by means of an AS-i mounting module in A/B design, which guarantees direct transfer of diagnostics signals and status data to the controller. The same module is used to switch a direct starter or a reversing starter. A second version enables users to also connect safety-related switching devices such as limit switches, and therefore safely shut down the starter.

For more information go to www.siemens.com/as-interface.

Siemens Industry Automation & Drive Technologies

Sir William Siemens House
Princess Road
Manchester
M20 2UR
UNITED KINGDOM

+44 (0)161 446 5000

sales.ad.uk@siemens.com

www.siemens.co.uk

More from Siemens Industry Automation & Drive Technologies

New Siemens Sivacon S8 Power Partner appointed
Posted 6 days ago

Finance 4.0 helps machine builders benefit from Industry 4.0
Posted 2 years ago

Control & Automation BEng degree at University of Salford
Posted 3 years ago

TIA Portal V14 engineering framework: new features
Posted 4 years ago

Siemens control system helps maintain combat aircraft
Posted 4 years ago

Extracting business risk through teamwork
Posted 4 years ago

Siemens releases entry-level SIMATIC industrial rack PC
Posted 4 years ago

Siemens expansion module for condition monitoring system
Posted 4 years ago

Siemens UK & Ireland: preferred supplier for glass maunfacturer
Posted 5 years ago

New display sizes for Siemens Sinumerik 828D controls
Posted 5 years ago

Siemens releases new motors geared towards use in machine tools
Posted 5 years ago

Siemens optimises flat panel technology for harsh environments
Posted 5 years ago

Siemens expands industrial ethernet switch portfolio
Posted 5 years ago

Control success for Siemens partner
Posted 5 years ago

Siemens brings its Integrated Drive Systems roadshow to the UK
Posted 5 years ago

Siemens launches 5-year warranty across SCALANCE range
Posted 5 years ago

Enhanced compact drives offer greater power density
Posted 6 years ago

Siemens launches communications technology partnership
Posted 6 years ago

New Simotics standard motors with highest efficiency class
Posted 6 years ago

Siemens to expand range of time relays
Posted 6 years ago

Siemens and British Glass announce technology partnership
Posted 6 years ago

Siemens routers enable remote access to automation networks
Posted 6 years ago

Simatic WinCC Scada software goes mobile
Posted 6 years ago

Aggregate Industries to enter strategic partnership with Siemens
Posted 6 years ago

Siemens appoints Juergen Maier as new UK Chief Executive
Posted 6 years ago

Flat panels offer multi-touch and gesture operation
Posted 6 years ago

Siemens teams with P2i to protect smartphones
Posted 6 years ago

Paper mill cuts out problems thanks to Siemens technology
Posted 6 years ago

New high-end industrial PC range from Siemens Industry
Posted 6 years ago

Retrofit drives future efficiencies
Posted 6 years ago

Efficient CNC systems on show from Siemens at MACH 2014
Posted 6 years ago

Totally Integrated Automation improves production flexibility
Posted 6 years ago

Siemens Industry appoints food and beverage sector lead
Posted 6 years ago

Operational efficiency via flexible drives and control system
Posted 6 years ago

Siemens process control technology used in pilot plant
Posted 6 years ago

Scada software expanded for analysis of individual KPIs
Posted 7 years ago

Siemens expands Sinamics G120P series
Posted 7 years ago

Siemens presents distributed Sinamics S120M servo drive
Posted 7 years ago

Siemens helps machine builder put a cap on traceability issues
Posted 7 years ago

Controller performance enhanced for major automation tasks
Posted 7 years ago

Partnership set to launch cooker and control system
Posted 7 years ago

Integrated automation controls rail straightening machine
Posted 7 years ago

Siemens launches new Simotics FD motor series
Posted 7 years ago

Siemens Large Drives extends partnership with Iconsys
Posted 7 years ago

Telecontrol for SIMATIC controllers
Posted 7 years ago

Siemens and KUKA announce cooperation
Posted 7 years ago

Safety first for machine launch with Siemens
Posted 7 years ago

Siemens apprentices develop Biospheric Project technology
Posted 7 years ago

Siemens hails UK as a "˜world-class innovation hub'
Posted 7 years ago

Siemens and HMK: A partnership driving technology innovation
Posted 7 years ago

Leading UK manufacturers warn of rising cyber security attacks
Posted 7 years ago

Siemens acquires Preactor to boost industrial software portfolio
Posted 7 years ago

Product family extends temperature sensor portfolio
Posted 7 years ago

Additional functions for LOGO! logic modules
Posted 7 years ago

Sinamics G120 portfolio enhanced with new control unit
Posted 7 years ago

Bolstered sector support from Siemens Industry
Posted 7 years ago

Performance improved for compact, embedded-class industrial PCs
Posted 7 years ago

Siemens Industry and Elite Controls offer controls one-stop-shop
Posted 7 years ago

Siemens expands industrial widescreen monitor choice
Posted 7 years ago

Drive system upgrades for high-speed paint lines
Posted 7 years ago

Siemens acquires specialist network provider RuggedCom
Posted 7 years ago

Siemens launches mid- to high-end Simatic S7-1500 PLC
Posted 7 years ago

New products from Siemens to improve operational efficiency
Posted 7 years ago

Siemens adds new widescreen terminal devices to HMI range
Posted 8 years ago

Power and efficiency gains for Siemens TIA Portal version 12
Posted 8 years ago

Siemens S7 plcs improve reliability for paper convertor
Posted 8 years ago

Siemens launches extension to single-phase power supplies
Posted 8 years ago

Increased range of Siemens Industry motor stock from Brammer
Posted 8 years ago

Upgraded Sinamics inverter range now available with Profinet
Posted 8 years ago

Manufacturers must unite on priorities for growth says report
Posted 8 years ago

RS Components expands Siemens stocked offer in Europe
Posted 8 years ago

"˜Answers for Industry' event tackles UK manufacturing questions
Posted 8 years ago

Siemens safety switches have a flexible modular design
Posted 8 years ago

Motor scrappage scheme from Siemens for EU MEPS compliance
Posted 9 years ago

Siemens named UK's number-one Industrial Engineering brand
Posted 9 years ago

Simatic WinCC V7 Service Pack 2 enhances functionality
Posted 9 years ago

Siemens ASI F-Link monitors 30 emergency stop buttons
Posted 9 years ago

Siemens launches Totally Integrated Automation (TIA) Portal
Posted 9 years ago

Sirius M200D motor starter is now Profienergy-compatible
Posted 9 years ago

New optical link modules for Profibus networks
Posted 9 years ago

Compact Sitop power supplies achieve high efficiency
Posted 9 years ago

Sinema Server monitors industrial Ethernet networks
Posted 9 years ago

Heavy demand for Sinamics G120P energy-saving inverter
Posted 9 years ago

Siemens raises standards for its Solution Partners
Posted 9 years ago

Safety relay is standstill monitor and safe speed monitor
Posted 10 years ago

New fail-safe CPUs for Simatic S7-400 controller
Posted 10 years ago

New Step 7 features for Simatic S7-1200 controller and HMIs
Posted 10 years ago

Converting Toolbox speeds development of converting machinery
Posted 10 years ago

Compact Simatic S7-300 CPU with Profinet and optional safety
Posted 11 years ago

Safety Evaluation Tool for EN ISO 13849-1 and EN 62061
Posted 11 years ago

Siemens unveils new products for machine tools
Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Posted 11 years ago

Modular IP65 expansion units attach to HMI panels
Posted 12 years ago

Siemens releases Open Modbus/TCP block
Posted 12 years ago

19-inch rack PC requires less height and depth
Posted 12 years ago

Optocoupler module switches 4A currents at 500Hz
Posted 12 years ago

Siemens adds 40A model to Sitop modular power supply series
Posted 12 years ago

IP65/IP67 compact block IO modules with Profinet interfaces
Posted 12 years ago

New C240 PN Simotion controller handles up to 32 axes
Posted 12 years ago

1PH8 series main motors have outputs of 2.8-1340kW
Posted 12 years ago

Sinamics S110 AC servo converter is highly versatile
Posted 12 years ago

New model of Sinamics S120 converter is water-cooled
Posted 12 years ago

New Siplus extreme control and communication products
Posted 12 years ago

Step 7 Topology Editor aids Profinet commissioning
Posted 12 years ago

RFID readers easily integrate with S7, Profibus and Profinet
Posted 12 years ago

Distributed I/O modules use IWLAN for wireless communications
Posted 12 years ago

Simatic PC DiagMonitor Version 4.0 also monitors Flash media
Posted 12 years ago

Industrial wireless LAN enhanced with iHOP function
Posted 12 years ago

New low-cost Scalance XB-000 industrial Ethernet switches
Posted 12 years ago

Entry-level HMIs are sealed to IP65
Posted 12 years ago

Simatic Mobile Panel 277 includes 10.4inch touch screen
Posted 12 years ago

Touchscreen operator panel uses 4.3inch widescreen format
Posted 12 years ago

Siemens sells machine vision business to Microscan
Posted 12 years ago

Low-cost synchronous linear motor uses magnet-free track
Posted 12 years ago

New additions to Simatic PCS 7 Lab process control system
Posted 12 years ago

New CEO for Siemens Industry Solutions Division
Posted 12 years ago

Tools to monitor and simulate Profinet networks
Posted 12 years ago

Sirius 3RW30 soft starters offered in four frame sizes
Posted 12 years ago

Compact motor starter is AS-i compatible
Posted 12 years ago

Simatic PCS 7 and WinCC gain power management functions
Posted 12 years ago

Siemens launches IO-Link sensors and field modules
Posted 12 years ago

Ergonomic HMIs are fully sealed to IP65
Posted 12 years ago

Integrated technologies aid development of packaging lines
Posted 12 years ago

Simatic S7-mEC integrates control, HMI and PC functions
Posted 12 years ago

New Logo! logic units have option of local/remote display
Posted 12 years ago

New Siemens Sirius 3RK3 modular safety system
Posted 12 years ago

All-in-one single-axis drive, motion and logic controller
Posted 13 years ago

Industrial PCs now have Intel Core 2 Duo processors
Posted 13 years ago

Simatic ET200pro FC drive incorporates safety functions
Posted 13 years ago

Sinamics G120 converter has Profinet interface
Posted 13 years ago

Sinamics G120D IP65 drive includes safety functions
Posted 13 years ago

Advanced training programme for automation experts
Posted 13 years ago

Siemens launches new Flender Motox geared motors
Posted 13 years ago

Sirius relays monitor level, speed or residual current
Posted 13 years ago

1LE1 IEC low-voltage motors are compact and efficient
Posted 13 years ago

Simatic Mobile Panel 277 Wireless includes safety functions
Posted 13 years ago

Sirius LZS plug-in relays are user-friendly and reliable
Posted 13 years ago

New failsafe devices for S7-300 and ET 200S ranges
Posted 13 years ago

More communications options for Simatic ET 200pro
Posted 13 years ago

Modules connect Simatic ET 200M systems to Profibus/Profinet
Posted 13 years ago

Drive Control Chart provides for graphical programming
Posted 13 years ago

Simotion V4.1 gains cam interpoloation function
Posted 13 years ago

Simotion 4.1 gains more Profinet functions
Posted 13 years ago

Siemens launches HT-direct high-performance torque motors
Posted 13 years ago

Siemens Sivacon S8 switchboard is easy to implement
Posted 13 years ago

Microbox PC 427B IPCs have powerful Intel processors
Posted 13 years ago

Simatic MV230 sensor inspects surface contours and profiles
Posted 13 years ago

Siemens adds two CILs to Simatic IT MES
Posted 13 years ago

Siemens Automation and Drives acquires UGS
Posted 13 years ago

Simatic ET 200S gains digital I/O and fail-safe relay modules
Posted 14 years ago

Fail-safe 277F IWLAN Mobile Panel uses Rapid Roaming
Posted 14 years ago

New regenerative power modules for frequency inverter range
Posted 14 years ago

High-performance rack PC for complex automation tasks
Posted 14 years ago

New AS-Interface products for safety engineering
Posted 14 years ago

Cost-effective remote maintenance of machinery
Posted 14 years ago

Modular ASIsafe switches simplify installation
Posted 14 years ago

New process visualisation system improves performance
Posted 14 years ago

Compact design for new servo motor series
Posted 14 years ago

Pneumatic module enables cabinet-free automation
Posted 14 years ago

New Simotion C240 motion controller
Posted 14 years ago

Sinamics S120 with integral positioning function
Posted 14 years ago

Ethernet controller brings control devices into line
Posted 14 years ago

Service offers globally recognised safety approval
Posted 14 years ago

Improved real-time operating system for industrial PCs
Posted 14 years ago

Motor management system gains expanded functionality
Posted 14 years ago

Controller performance enhanced for major automation tasks
Posted 14 years ago

Controller performance enhanced for major automation tasks
Posted 14 years ago

Sinamics S120 with liquid cooling saves costs in poor conditions
Posted 14 years ago

Safety interlocks use ASIsafe for signals and power
Posted 14 years ago

Safety relay configured using front-panel DIP switches
Posted 14 years ago

Innovations in motion control for metal forming machinery
Posted 14 years ago

Innovative CNC technologies for aerospace applications
Posted 14 years ago

Newspaper folders upgraded with 'shaftless' Siemens technology
Posted 14 years ago

More products

1 hour ago

Post BREXIT notes for machine builders

Hold-Tech Files has just published a review of the post-BREXIT picture for machine builders, featuring answers to questions that will undoubtedly be common to many of us at the moment

6 hours ago

New all-in-one industrial PCs

With its newly introduced all-in-one (AIO) solutions, Phoenix Contact now offers industrial PCs with a completely closed die-cast aluminum housing (IP65)

22 hours ago

Modular safety relay claimed to be world first

Pilz says that its all-new myPNOZ is the world’s first batch size 1 safety relay

1 day ago

Edge computing hardware and software choices for machine builders

RDS and AAEON offer machine builders an even greater choice of hardware and software to build high performance, integrated solutions for smart applications that require vision data to be processed at the edge

4 days ago

Certified Machinery Safety Expert course on 18th January

In conjunction with TÜV NORD, Pilz Automation UK is hosting its first CMSE Course of 2021. It starts on 18th January and lasts for four days

4 days ago

Improving communication with (and between) machines

Lenze has published a White Paper discussing PackML, a programming standard defined by OMAC, the Organisation for Machine Automation & Control. Here, Lenze's Marc Vissers provides machine builders with an insight into the paper

4 days ago

Danfoss buys Artemis Intelligent Power

Danfoss says it will allow them to begin the global commercial rollout of its Digital Displacement® pump technology, a disruptive low-carbon opportunity with applications in the industrial and off-highway markets

5 days ago

Quarter turn fastener that still turns heads

Automotive manufacturers are gradually making the transition from solely manufacturing vehicles to taking on more responsibility for the performance of a vehicle over its life cycle. As a result, OEMs are increasingly looking for ways to lower installation costs, and facilitate quick repeatable access to critical vehicle components in order to enable faster service calls

5 days ago

Wave spring or coil spring?

Simon Ward is Technical Manager at Uckfield-based fastener specialists TFC. Here he offers a machine designers a comparison between wave springs and round wire coil springs

5 days ago

New course: Safety Design Incorporating EN ISO 13849-1/EN 62061

Pilz Automation UK says that this training course is designed to enable delegates to develop a greater understanding of the processes and standards related to safety control system specification, design and validation