Posted to News on 9th Jul 2019, 13:03
Single-axis PWM digital drive: high-performance motion control
Aerotech is introducing the third PWM digital drive controller this year: the XC2 PWM is a high-performance, single-axis motor drive with a narrow compact housing for motion control applications.
The XC2 is compatible with the Automation 3200 motion platform, which uses the HyperWire motion bus (fibre optic interface), and controls brushless and brushed DC motors, voice coil or stepper motors with an operating voltage of up to 100V DC and peak current capacity of 10A.
As you would expect from Aerotech, digitally closed current and servo control loops provide the highest level of positioning accuracy and speed stability. Control bandwidths of up to 20kHz are possible with simultaneous control of digital and analogue inputs and outputs, parallel data acquisition, process control and encoder interpolation - all in real time.
As standard, the XC2 features STO (Safe Torque Off) which means the drive torque is switched off during maintenance work. Other features include a data array with over 4 million 32-bit elements, dedicated inputs for reference and limit switch signals, and improved power monitoring. Square-wave, sinusoidal and absolute encoders are supported. The drive controller accepts square-wave encoder signals with up to 40 million pulses per second. Sinusoidal encoder signals can be interpolated with a factor of up to 16,384 (14 bits) for high-resolution position feedback.
Optionally, each single-axis XC2 PWM digital drive can be upgraded with an I/O extension board, significantly increasing the number of I/Os. This add-on board also has a dedicated, position-locked PSO output.
Follow the link for further information about the new XC2.
