SMAC introduces 'world's thinnest moving coil linear motor'

The LCA6 is cross-roller guided, increasing accuracy. Flat coils are centred between cross-rollers so deflection load is reduced and rigidity is increased. In addition, the LCA6 is small and stackable, conserving space.

LCA6 Specs:

• Linear Stroke: 5-30mm
• Encoder resolution: 0.1-5 micron
• Coil resistance: 18.9 OHMS (24V)
• Moving mass: 38g
• Total mass: 210g (w/o cable)
• Peak Force: 5N @1.5 amps (lower current models available)

The LCA6 is useful for electronic pick-and-place, biomedical dispensing, and QC measurement. Benefits include a compact and slim package, superior cross ruler guiding, ultra-low friction, ultra-smooth and rigid guiding, programmable position, force, velocity, Soft-Land capability, and feedback of position, force, and velocity.

SMAC's built in sensor feedback system gives SMAC's Moving Coil Actuators the mechatronic ability to "do work and verify its success at the same time." This would allow the actuators to quality check key processes 100 per cent in real time and feedback the results.

SMAC Moving Coil Actuators claim to be true "mechatronic solutions." By that they mean their actuators have capabilities such as programmable and controllable position, velocity, and force, high accelerations, cycle life well over 100M, and a patent-pending "Soft-Land" capability. The Soft-Land capability is very useful when performing fragile part assembly, measurement, moving objects, etc.

SMAC's low-friction guide system makes their actuators highly repeatable from move to move - within 1 msec. SMAC's product development group originated such models as the Linear/Rotary actuator, the 2 independent axis Gripper, the world's first direct drive Robotic Finger, and advanced magnetic circuit designs that have more than doubled forces in the same sized mechanical packages.

For more information about the LCA6 and other products, please visit www.smac-mca.com.