Smart Condition Monitoring for barley malt production

Muntons Malt, one of the UK's largest producers of malted barley, has chosen the Smart Condition Monitoring (SCM) system from Mitsubishi Electric to protect fans and motors vital to its large-scale and sensitive production process. Used to make beer, spirits and a range of popular foodstuffs, malted barley is produced in large batches where conditions are critical to a consistent product.

The operation team had previously experienced issues with difficult-to-reach bearings inside a large fan housing and wanted to stay ahead of the game in future. Plant Engineer Michael Plawecki explains: "The malting process was established literally thousands of years ago and still involves steeping, germination and kilning of barley ears. The big difference now is the scale of operation; we process many tonnes at a time and the last two processes both rely on a steady supply of blown air. The fans and motors that provide the air are therefore critical to our operations.

"Like many food industries, the principles of the process are quite traditional, but we rely on a lot of automation, electro-mechanical equipment and sensors to provide fine control over air flow, heat and moisture. Each batch is very valuable, not just in monetary terms but also to the customer, so we are extremely pro-active when it comes to service and maintenance of our equipment.

"We were, however, caught out by a bearing inside a fan assembly that we only realised had problems when it was too late, and we had to make an unscheduled stop on one of the lines to make repairs. Determined to learn from that lesson we found what looked like an ideal solution from Mitsubishi Electric, an automation brand we trusted. The key for us was to find a system with sophisticated predictive maintenance technology onboard that could be linked to the existing SCADA system and provide us with the maximum forewarning of any future issues yet was quick and easy to install."

Early warning system

The SCM solution provided by Mitsubishi Electric comprises smart sensors that, when attached to bearing housings, gearboxes, pumps and motors, can sense when equipment starts to operate outside its normal envelope due to wear. It effectively provides a sophisticated early warning system for critical pieces of rotating plant equipment. Vibration frequencies and temperature readouts are monitored continuously and fed back to an L Series Mitsubishi Electric PLC controller via an industrial Ethernet network cable.

The controller is housed in a robust enclosure and easily connected to other network system hardware and software platforms, such as the SCADA system at Muntons Malt. The sensors are developed by bearing expert FAG and can be set-up to recognise tell-tale signs in complex vibration patterns specific to the type of equipment it is attached to. The intelligent part of the software compares the data it is receiving with highly developed data models from thousands of previous installations, providing a virtually foolproof analysis and alert system for the user.

Live information and any alarms are displayed on a GOT Series HMI mounted to the control enclosure. The system can work autonomously of any other automation, with multiple sensors located and recognised by unique IP addresses. The visual information as well as the alerts in the case of Muntons were easily connected in to the existing automation software platform.

The initial system installed provides condition monitoring for two large 315kW fan sets and a single 90kW fan set, referencing the electric motor, power transmission coupling and main fan shaft bearing on each. Michael confirms the team is happy with the project and the initial results: "As promised the system was easy to install and relatively simple to commission. We are now acutely aware of the health of the fan sets and have a very clear picture of any maintenance way in advance of us needing to make physical changes. Remote monitoring and fast diagnosis of any issues has also made us very responsive should the operating parameters we have set even be approached.

"We are reviewing the entire plant now to make a decision on which other parts of the plant we include, with the aim of speeding up maintenance and reducing scheduled maintenance periods. We recognise that the investment in automation and predictive maintenance pays off very quickly by avoiding unscheduled downtime but can also be used to increase operational effectiveness and productivity."

Learn more at

Mitsubishi Electric Europe B.V.

Travellers Lane
AL10 8XB

+44 (0)1707 288780

More applications
1 day ago
Yamaha demonstrates the power of robot teamwork
Automatica 2022 saw Yamaha Motor Robotics FA Section demonstrating industrial robots working together autonomously to raise productivity and reduce waste.
1 day ago
Telsonic UK doubles floorspace to meet demand
Despite the numerous challenges which have been present over recent times, brought on by a combination of the pandemic and the changing business landscape, Telsonic UK has not only weathered the storm but has doubled the size of its Poole facility to meet increasing demand for its ultrasonic modules, systems, and ultrasonic automated solutions.
1 day ago
Delta helps packaging manufacturer centralise control of facility
As a result of expansion, a manufacturer of plastic bags for food packaging that operates a factory in Poland decided it had too many machines to continue monitoring and controlling them individually. It turned to Delta for a solution for centralised control and management.
1 day ago
Robot cell increases productivity in pneumatic valve assembly
When CME was approached to develop a fully automated solution for pneumatic valve assembly, a six-axis robot is at the heart of the innovative system.
2 days ago
Omron’s Flexible Manufacturing Roadshow comes to the UK
Omron has taken its European Flexible Manufacturing Roadshow on the road to Bradford, featuring exclusive demonstrations of cutting-edge, human-machine collaborative solutions not usually seen outside of a factory setting due to their size and scale.
2 days ago
Reliable cable guiding on industrial robots
By using the ROBOTRAX cable carrier system in combination with the innovative PBU pull back unit from Kabelschlepp Metool, automation expert Keba Industrial Automation was able to set up a realistic technology demonstrator. Reliable cable guiding was a key element of success.
2 days ago
RS recognises industrial players at annual awards event
RS has recognised some key industrial market players instrumental in aiding its commitment to meeting customer requirements through continual evolution of its offering, at the recent RS Connect First Choice Supplier Awards event.
2 days ago
Emka locking technology suits international enclosure OEM
Emka developed a special type and size for leading enclosure OEM Rittal, with the company completely relaunching its range of small and compact enclosures with the new AX and KX series.
2 days ago
Reliance supplies motion control parts to Malvern Panalytical
Reliance Precision has continued its relationship with Malvern Panalytical with the supply of high precision motion control parts for the company’s Zetasizer Advance instrument range.
3 days ago
Thorite embarks on nationwide branch refurbishment and recruitment
Air and fluid power specialist Thorite has launched a £200,000 investment project in its 10 sales and service centres to support its ambitious five-year growth plan.

Login / Sign up