Solid-state fuses for the 24V circuit
Posted to News on 23rd Nov 2017, 19:34

Solid-state fuses for the 24V circuit

New modular, solid-state fuse units from ifm electronic give the user much greater control over their circuits. Modules in the DF system control single or dual channels with loads up to 10A per channel, and up to eight modules can be attached to the base unit.

Solid-state fuses for the 24V circuit

The DF series uses the latest IO-Link technology for bidirectional communication with the PLC. This allows the user to enable each channel independently, allowing a phased start-up of a complex system, for example, to avoid a big inrush that would otherwise trip a traditional fuse. If a trip does occur, the circuity can also be reset remotely.

Data exchange also leads to more information about the machine; the DF will tell the PLC the actual current and voltage of each channel, so the power consumption is split down to individual circuits. The cause of any trip can also be determined, i.e. an overload or a short-circuit.

Please visit www.ifm-electronic.co.uk for further information about the new solid-state fuse units from ifm electronic.

Want the latest machine building news straight to your inbox? Become a MachineBuilding member for free today >>


ifm electronic Limited

Kingsway Business Park
Oldfield Road
TW12 2HD
UNITED KINGDOM

+44 (0)20 8213 0000

Procter Machine Safety Procter Machine Safety Pilz Automation Technology Mechan Controls Ltd ABSSAC Ltd Micro Epsilon UK Limited Smartscan Ltd Euchner UK Ltd AutomateUK Heidenhain (GB) Ltd STOBER Drives Ltd Aerotech Ltd Leuze electronic Ltd ifm electronic Limited Kawasaki Robotics (UK) Ltd