Teseo launches range of air & gas flowmeters in UK

The Teseo range of flowmeters and sophisticated yet simple-to-use measuring systems provides the complete picture to determine air consumption and output flow of compressor and treatment equipment. It provides all the data needed to assist in making the right decisions to optimise a compressed air system.

The flowmeters - the VP FlowScope product range - are backed by tested technology in use world-wide and carry a number of specific benefits. First, they provide flow, pressure and temperature in a single device, providing simplicity for the end-user. Second, they feature Thermabridge TM sensor technology, which measures bi-directionally, allowing installation in a ring network and overcoming the problems some flowmeters experience where data reading can become confused by negative, partial and full-flows passing through the pipework. Third, through a real-time energy monitoring system, users can see data and usage patterns for both supply and demand, linking all the utilities on-site and viewable on any platform from PC to smartphone.

The FlowScope range includes the following products:

The FlowScope M: the three-in-one flowmeter for compressed air and technical gases. It measures flow, pressure and temperature simultaneously. Re-calibration (usually requiring the shipment of the product back to base to have it re-set) is no longer necessary. The FlowScope M has a transmitter and sensor cartridge, which reduces re-calibration to a simple exchange. It comes with standard Ethernet interface, connecting directly to the user's network; it is also internet compatible through 4"20mA signals and nR485 interface.

The FlowScope in-line: this provides real-time measurement at point-of-use and is simple to install with no interruption to the production process. It can be used for air, nitrogen, carbon dioxide, argon and all dry, non-corrosive gases.

The FlowScope DP: this is designed for wet air use, with its resistance to pollution and water drops. Typical installations are with wet air discharge of the compressor, in higher temperatures and in high velocity pipework.

A range of additional accessories is available to complement the measurement devices. These are designed to be installed wherever there is a particular need, and cover: insertion probes; dew point sensors; current sensors; leak detectors; hot drill tappers and ultrasonic thickness gauges.

Simplicity of installation is backed by the easy use of the management software, which allows allocation of costs; tracking and monitoring of leaks; automated reports on PDF; centralised benchmarking for different locations and the tracking of maintenance needs. The products are all available both to purchase and on a rental basis, where the need is purely for a short, one-time system report.

For further information about Teseo's range of flowmeters, sensors and monitoring systems for compressed air and technical gases go to www.teseouk.co.uk.